Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter Instruction Manual

1. Увод

Тхе Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter allows you to wirelessly stream audio from any Bluetooth-enabled device to your speaker system. This manual provides instructions for setting up, operating, and maintaining your device.

Слика 1.1: Предња страна view оф тхе Amped Wireless BTSA1 adapter with its antenna.

Кључне карактеристике

• Wirelessly stream audio to your speaker system from any Bluetooth-enabled device.
• Experience superior sound quality without audio interruptions.
• Једноставно „plug-and-play“ подешавање.
• Compatible with any Bluetooth device and speakers with 3.5mm or RCA inputs.

2. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter
• Повер Адаптер
• 3.5mm (male) to RCA (male) cable
• Водич за брзу инсталацију

3. Подешавање

Follow these steps to connect your Amped Wireless BTSA1 adapter to your speaker system and pair your device.

3.1 Повезивање адаптера

1. Прикључите напајање: Plug the provided power adapter into the "PWR" port on the back of the BTSA1 adapter and then into a wall outlet.
2. Connect to Speaker System:
   • For RCA input: Use the included 3.5mm to RCA cable. Connect the RCA ends to the "AUDIO OUT" ports (red and white) on the back of the adapter and the 3.5mm end to your speaker system's auxiliary input.
   • For 3.5mm input: Use a standard 3.5mm audio cable (not included). Connect one end to the "LINE OUT" port on the back of the adapter and the other end to your speaker system's 3.5mm auxiliary input.

Image 3.1: Rear panel connections of the BTSA1 adapter, including power, audio outputs, and antenna port.

Слика 3.2: Бочна страна view illustrating the antenna connection and rear ports.

3.2 Pairing a Bluetooth Device

1. Ensure the BTSA1 adapter is powered on. The "Connect" button on the front will illuminate.
2. On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to its Bluetooth settings.
3. Омогућите Блуетоотх и потражите доступне уређаје.
4. Изаберите „Amped Wireless BTSA1" from the list of found devices.
5. Once connected, the indicator light on the adapter will change to confirm successful pairing.

Слика 3.3: Предња страна view of the BTSA1 adapter, highlighting the 'Connect' button.

4. Управљање адаптером

After successful pairing, you can begin streaming audio.

1. Ensure your speaker system is turned on and set to the correct input source (AUX, RCA, etc.) where the BTSA1 is connected.
2. Play audio from your Bluetooth-enabled device. The sound will now be transmitted wirelessly to your speaker system.
3. Adjust volume using your Bluetooth device or your speaker system's controls.

Напомена: Only one device can be actively connected to the BTSA1 adapter at a time. To connect a different device, disconnect the currently paired device from its Bluetooth settings, then initiate pairing from the new device.

5. Одржавање

Тхе Amped Wireless BTSA1 adapter requires minimal maintenance.

• Keep the device in a dry environment, away from direct sunlight and extreme temperatures.
• Очистите спољашњост меком, сувом крпом. Не користите течна средства за чишћење или аеросоле.
• Осигурајте одговарајућу вентилацију око уређаја како бисте спречили прегревање.

КСНУМКС. Решавање проблема

Ако наиђете на проблеме са својим Amped Wireless BTSA1 adapter, refer to the following common solutions:

7. Спецификације

8. Видео производа прекоview

9. Гаранција и подршка

За информације о гаранцији и техничкој подршци, обратите се званичном Ampед Вирелесс website or the contact details provided in the Quick Install Guide included with your product.