SVS PB-2000 Subwoofer Instruction Manual

1. Подешавање

Proper setup is crucial for optimal performance of your SVS PB-2000 Subwoofer. Follow these steps to integrate the subwoofer into your home theater system.

1.1 Отпакивање

The SVS PB-2000 Subwoofer is double-boxed with protective padding. Carefully open the outer box, then the inner box. Remove all packaging materials, including the protective plastic bag and foam inserts.

Figure 1: SVS PB-2000 Subwoofer with protective grille installed.

1.2 Постављање

Place the subwoofer in a location that allows for optimal bass distribution in your listening area. Experiment with different positions to find the best acoustic balance. The subwoofer features a robust Medium Density Fiberboard (MDF) cabinet construction and screw-in rubber feet for stability.

Слика 2: Предња страна view of the SVS PB-2000 Subwoofer, revealing the 12-inch driver and front-firing port.

1.3 Везе

Connect the subwoofer to your audio system using the stereo line-level RCA input connections located on the rear-mounted amplifier panel. Ensure all connections are secure. The subwoofer includes a detachable three-prong power cord.

Figure 3: Rear panel with amplifier controls and input/output connections.

1.4 Почетно укључивање

After making all connections, plug in the power cord and turn on the main power rocker switch. The LED indicator light on the front of the subwoofer will illuminate (blue for on, red for standby/off).

2. Упутство за употребу

The SVS PB-2000 features a Sledge STA-500D DSP amplifier with various controls for fine-tuning performance.

2.1 Контроле

• Контрола јачине/појачања: Adjusts the overall output level of the subwoofer.
• Phase Control (0-180 degrees): Allows for continuous adjustment of the subwoofer's phase to ensure seamless blending with main speakers.
• Low Pass Filter (50-160 Hz, 12 dB/octave): Controls the upper frequency limit of the subwoofer. Can be disabled for LFE (Low-Frequency Effects) settings.
• Auto-On / On Toggle Switch: Selects between automatic power on/off based on audio signal detection or continuous operation.
• 3-12V Trigger Input: Allows for external control of the subwoofer's power state.

2.2 ЛЕД индикатор

A blue LED indicates the subwoofer is active, while a red LED indicates standby mode. The subwoofer has a green standby mode with less than 0.5 watts consumption.

3. Одржавање

To ensure the longevity and performance of your SVS PB-2000 Subwoofer, follow these maintenance guidelines:

• Чишћење: Use a soft, dry cloth to wipe down the cabinet. Avoid abrasive cleaners or solvents.
• Нега решетке: The protective non-resonant steel mesh grille can be removed for cleaning or aesthetic preference. Handle with care to avoid bending or damage.
• Окружење за пласман: Avoid placing the subwoofer in direct sunlight, near heat sources, or in areas with excessive moisture.

КСНУМКС. Решавање проблема

If you encounter issues with your SVS PB-2000 Subwoofer, refer to the following common solutions:

• Нема звука: Check all cable connections, ensuring they are firmly seated. Verify the subwoofer is powered on and not in standby mode. Confirm the volume/gain control is not set to minimum.
• зујање: Ensure all audio cables are properly shielded and not running parallel to power cables. Try plugging the subwoofer into a different electrical outlet.
• Изобличен звук: Reduce the volume/gain setting. Check the low pass filter and phase settings for proper integration with your main speakers.

For persistent issues, please contact SVS Customer Support.

5. Спецификације

Figure 4: SVS PB-2000 Subwoofer dimensions.

6. Гаранција

The SVS PB-2000 Subwoofer comes with a Limited Warranty. Please refer to the warranty card included in the packaging or visit the official SVS webсајт за детаљне услове и одредбе.

7. Подршка

For further assistance, technical support, or service inquiries, please contact SVS Customer Support. Contact information can typically be found on the SVS webсајту или у документацији производа.