HAND SP-18

Well Made Tools SP-18 Industrial Sewing Machine Stay Stitch/Top Stitch Foot 1/8" - Instruction Manual

Model: SP-18 | Brand: HAND

Увод

This manual provides essential information for the proper use, setup, operation, and maintenance of your Well Made Tools SP-18 Industrial Sewing Machine Stay Stitch/Top Stitch Foot 1/8". This presser foot is designed for industrial single-needle sewing machines, offering precision for narrow stay stitches and top stitches. It is compatible with various industrial sewing machine brands including Brother, Singer, Juki, and JANOME.

Well Made Tools SP-18 Industrial Sewing Machine Stay Stitch/Top Stitch Foot 1/8 inch

Image: The SP-18 Industrial Sewing Machine Stay Stitch/Top Stitch Foot, showing its robust metal construction and precise design for industrial sewing applications.

Карактеристике производа

  • Компатибилност: Designed to work with any industrial single-needle sewing machine.
  • Свестраност: Ideal for creating narrow stay stitches and top stitches.
  • Пријаве: Suitable for garment factories, fashion studios, and students.
  • Димензије: Foot length: 3.3 cm, foot width: 1.1 cm, total foot height: 3 cm.
  • Материјал: Направљено од издржљивог метала.

Сетуп

Before installing the SP-18 presser foot, ensure your sewing machine is turned off and unplugged for safety. Refer to your sewing machine's manual for specific instructions on changing presser feet, as procedures may vary slightly between models.

  1. Remove Existing Foot: Loosen the thumb screw that holds the current presser foot in place and carefully remove it.
  2. Position the SP-18 Foot: Align the SP-18 presser foot with the presser foot bar. Ensure the pin on the foot fits into the slot on the bar.
  3. Осигурајте стопало: Tighten the thumb screw firmly to secure the SP-18 presser foot to the machine. Do not overtighten.
  4. Тестирање прилагођавања: Gently lower the presser foot lever to ensure the foot is properly seated and moves freely without obstruction.
Close-up of SP-18 presser foot held by fingers, showing the attachment mechanism

Слика: Крупни план view of the SP-18 presser foot, highlighting the attachment point and the "SP-18 1/8" marking, demonstrating how it is held for installation.

Оперативни

The SP-18 presser foot is designed for precise stitching. Its narrow design allows for accurate placement of stitches close to edges or for creating decorative topstitching.

  • Постављање тканине: Place your fabric under the presser foot, aligning the edge of the fabric with the guide on the foot for consistent seam allowances or topstitching lines.
  • Врста шава: Select the appropriate straight stitch setting on your industrial sewing machine.
  • Положај игле: Ensure your needle is correctly positioned to work with the foot's opening. Adjust if necessary.
  • Контрола брзине: For intricate work or when first using the foot, operate the machine at a slower speed to maintain control and accuracy.
  • вежба: It is recommended to practice on scrap fabric before working on your final project to achieve desired results.
Сиде view of SP-18 presser foot with HAND logo

Слика: Споредни професионалацfile of the SP-18 presser foot, displaying its full form and the "HAND" brand logo, indicating its design for precise sewing operations.

Одржавање

Proper maintenance will extend the life of your SP-18 presser foot and ensure consistent performance.

  • Чишћење: After each use, wipe the presser foot with a soft, dry cloth to remove any lint, dust, or fabric fibers.
  • Складиштење: Store the presser foot in a dry place, away from moisture and direct sunlight, to prevent rust or damage. A small container or a dedicated sewing machine accessory box is ideal.
  • инспекција: Периодично проверавајте стопицу да ли има знакова хабања, савијања или оштећења. Оштећена стопица може утицати на квалитет шава.
  • Избегавајте оштре хемикалије: Do not use abrasive cleaners or harsh chemicals, as these can damage the metal finish.

Решавање проблема

ПроблемМогући узрокРешење
Uneven StitchingFoot not securely attached; fabric not guided properly.Ensure the foot is tightened correctly. Guide fabric steadily and evenly.
Needle Hitting FootIncorrect needle position; foot not aligned.Adjust needle position on your machine. Re-attach the foot ensuring proper alignment.
Foot Feels LooseThumb screw is loose.Tighten the thumb screw that secures the presser foot.

Спецификације

  • Модел: СП-18
  • Тип: Stay Stitch/Top Stitch Foot
  • Компатибилност: Industrial Single Needle Sewing Machines (Brother, Singer, Juki, JANOME, etc.)
  • Материјал: Метал
  • Foot Length: 3.3 цм (1.3 инча)
  • Ширина стопала: 1.1 цм (0.43 инча)
  • Total Foot Height: 3 цм
  • Тежина артикла: 0.635 унци
  • Произвођач: Well Made Tools
  • Бренд: ХАНД

Гаранција и подршка

For any questions regarding the SP-18 presser foot, please contact the manufacturer, Well Made Tools, or your retailer. While specific warranty details are not provided in this manual, standard consumer rights apply. Please retain your proof of purchase for any warranty claims.

For further assistance, you may refer to the product listing on Amazon: Well Made Tools SP-18 Product Page

© 2023 Well Made Tools. All rights reserved.