WAC Lighting QP-LED903-DB 900 Series LED Socket Set Instruction Manual

1. Увод и преглед производаview

This manual provides essential instructions for the safe and efficient use of the WAC Lighting QP-LED903-DB 900 Series LED Socket Set. This LED socket set is designed for indoor use and features energy-efficient LED technology.

Key features include a collar with a threaded set screw for adjusting lamp positions within a shade, smooth and continuous ELV dimming capabilities, and a long rated life. The system operates at 12 Volts and provides 450 lumens with a color temperature of 3000 Kelvin and a CRI of 82.

Слика 1: Завршеноview of the WAC Lighting QP-LED903-DB LED Socket Set.

2. Безбедносне информације

УПОЗОРЕЊЕ: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Always check local laws and regulations before installation and use.

• Always disconnect power at the circuit breaker before installation, removal, or servicing.
• Installation should be performed by a qualified electrician in accordance with all applicable electrical codes.
• Do not rest glass components directly on the socket base.
• Ensure the product is used only in dry, indoor locations.
• Do not modify the product in any way; unauthorized modifications may void the warranty and create safety hazards.
• This product is UL Listed, indicating compliance with safety standards.

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• WAC Lighting QP-LED903-DB 900 Series LED Socket Set (1 unit)
• Упутство за употребу (1 јединица)
• Collar with threaded set screw

Напомена: The package dimensions are approximately 5.62 inches (length) x 4.255 inches (width) x 2.765 inches (height).

4. Подешавање и инсталација

This LED socket set is designed for protruding mounting and requires a 12 Volt corded electric power source with a US-style plug format (Type A).

1. Искључивање струје: Пре почетка рада, уверите се да је напајање подручја инсталације потпуно искључено главним прекидачем.
2. Монтажа: Securely mount the socket set using appropriate hardware for a protruding installation. Ensure the mounting surface is stable and can support the fixture's weight.
3. Ожичење: Connect the 12 Volt corded electric power source to the socket set. Follow all local electrical codes and the wiring diagrams provided with your specific fixture (if applicable).
4. Lamp Подешавање положаја: The included collar with a threaded set screw allows for varying lamp positions inside the shade. Adjust the collar to achieve the desired lamp depth and secure it by tightening the set screw.
5. Glass Placement: If your fixture includes glass components, ensure they are installed correctly and do not rest directly on the socket base.
6. Поновно повезивање струје: Када је инсталација завршена и сви прикључци су безбедни, вратите напајање на прекидачу.

Figure 2: Detail of the LED socket set, showing the collar for lamp position adjustment.

5. Упутство за употребу

The WAC Lighting QP-LED903-DB LED Socket Set is designed for straightforward operation.

• Укључивање/искључивање: Контролишите светло помоћу зидног прекидача повезаног са расветним елементом.
• Затамњење: This socket set supports smooth and continuous ELV (Electronic Low Voltage) dimming. Use a compatible ELV dimmer switch for dimming functionality.
• Енергетска ефикасност: The integrated LED technology ensures energy-efficient operation with no projected UV or IR radiation.

6. Одржавање

The WAC Lighting QP-LED903-DB LED Socket Set is designed for long-term, low-maintenance operation.

• Чишћење: To clean the socket set, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or any cleaning agents that could damage the finish or electrical components.
• Живот ЛЕД: The integrated LED has a rated life of 50,000 hours (estimated life of 30,000 hours), meaning no bulb replacement is typically required for the life of the product under normal operating conditions.
• инспекција: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, disconnect power immediately and consult a qualified electrician.

КСНУМКС. Решавање проблема

If you encounter issues with your LED socket set, refer to the following common troubleshooting steps:

• Светло се не укључује:
  • Проверите осигурач да бисте били сигурни да се уређај напаја струјом.
  • Проверите да ли је зидни прекидач у положају „УКЉУЧЕНО“.
  • Уверите се да су све везе ожичења безбедне.
• Проблеми са затамњењем:
  • Confirm that a compatible ELV dimmer switch is being used.
  • Check the dimmer switch wiring.
• Трепереће светло:
  • Уверите се да су све везе чврсте.
  • Проверите да ли је напајање стабилно.
  • If using a dimmer, ensure it is compatible and properly installed.

Ако проблеми и даље постоје након што сте покушали ове кораке, обратите се корисничкој подршци.

8. Спецификације

9. Информације о гаранцији

The WAC Lighting QP-LED903-DB 900 Series LED Socket Set comes with a 5 година гаранције од датума куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.

For detailed warranty terms and conditions, please refer to the official WAC Lighting warranty policy or contact customer support.

10. Корисничка подршка

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact WAC Lighting customer support.

Произвођач: ВАЦ осветљење

Please visit the official WAC Lighting webсајт за контакт информације и додатне ресурсе.