Behringer iNUKE NU1000 Power Ampлифиер Упутство за употребу

1. Увод

The Behringer iNUKE NU1000 is an ultra-lightweight, high-density 1000-watt power amplifier designed for professional audio applications. This amplifier delivers significant power output while maintaining a compact and efficient design, making it suitable for various sound reinforcement needs. Its advanced Class-D technology ensures reliable performance with minimal thermal buildup.

Кључне карактеристике укључују:

• Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode).
• Revolutionary cool-running High-Density Class-D technology for ultimate reliability.
• Ultra-efficient switch-mode power supply for noise-free audio and superior transient response.
• "Zero-Attack" limiters provide maximum output level with reliable overload protection.
• Built-in stereo crossover with low-cut, high-cut, and full range modes.

2. Важна безбедносна упутства

Please read and follow all safety instructions before operating this device to prevent electric shock, fire, or injury. Keep these instructions for future reference.

• Извор напајања: Connect the unit only to an AC power outlet that matches the voltagе и фреквенција наведена на задњој плочи.
• уземљење: Ensure the power cord has a grounding conductor. Do not defeat the safety purpose of the polarized or grounding-type plug.
• вентилација: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Maintain adequate space around the unit for proper airflow.
• Вода и влага: Do not use this apparatus near water or expose it to dripping or splashing. Do not place objects filled with liquids on the apparatus.
• топлота: Не постављајте у близини извора топлоте као што су радијатори, грејни регистри, пећи или други уређаји (укључујући ampлифиерс) који производе топлоту.
• Чишћење: Чистите само сувом крпом.
• Сервисирање: Све сервисирање препустите квалификованом сервисном особљу. Сервисирање је потребно када је уређај оштећен на било који начин, као што је оштећен кабл за напајање или утикач, ако је течност проливена или су предмети упали у апарат, ако је апарат био изложен киши или влази, не ради нормално , или је одбачено.
• Каблови: Use only specified attachments/accessories. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

3. Подешавање и везе

3.1 Распакивање и постављање

Carefully unpack the Behringer iNUKE NU1000 amplifier. Inspect the unit for any signs of damage during transit. Place the amplifier in a well-ventilated area, ideally in a standard 19-inch equipment rack. Ensure sufficient space around the unit for proper airflow, especially around the rear fan.

3.2 Предња плоча прекоview

Figure 3.1: Front panel of the Behringer iNUKE NU1000 ampлифиер. Ово view shows the power button, channel level controls (CH A and CH B), and status indicators.

The front panel provides access to the main operational controls and indicators:

• Дугме за напајање: Окреће amplifier uključen ili isključen.
• Channel Level Controls (CH A, CH B): Подесите ниво излазног звука за сваки канал.
• Signal/Clip LEDs: Indicate signal presence and clipping (overload) for each channel.
• ЛЕД за напајање: Светли када је јединица укључена.

3.3 Прикључци задње плоче

Figure 3.2: Rear panel of the Behringer iNUKE NU1000 ampлифиер. Ово view displays the AC power inlet, input connectors (XLR/TRS combo), output connectors (Speakon-compatible), and crossover mode switches.

The rear panel houses all input, output, and power connections:

• Улаз за наизменичну струју: Connect the supplied power cord here. Ensure the power source matches the unit's requirements.
• Inputs (CH A, CH B): These are combo XLR/TRS 6.35mm Jack connectors for balanced or unbalanced audio signals from your mixer or audio interface.
• Outputs (CH A, CH B): Speakon-compatible connectors for connecting to your loudspeakers. Ensure correct wiring for stereo or bridge mode.
• Прекидач режима: Selects between Stereo, Parallel, or Bridge operating modes.
• Цроссовер прекидач: Configures the built-in stereo crossover for Low-Cut, High-Cut, or Full Range operation.

3.4 Повезивање аудио уређаја

1. Connect your audio source (e.g., mixer, preampлифиер) на Input CH A и Input CH B using appropriate XLR or 6.35mm TRS cables.
2. Повежите своје звучнике на Output CH A и Output CH B using Speakon-compatible cables. Ensure the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or 8 Ohms).
3. Подесите Прекидач режима to your desired operation (Stereo for two separate channels, Bridge for mono high-power output).
4. Подесите Цроссовер Свитцх based on your speaker setup. Use "Full Range" for full-range speakers, "Low-Cut" for subwoofers, or "High-Cut" for mid/high frequency speakers.
5. Прикључите кабл за напајање у Улаз за наизменичну струју and then to a grounded electrical outlet.

4. Руковање Ampлифиер

4.1 Укључивање/искључивање

1. Before powering on, ensure all level controls on the amplifier and your audio source are set to their minimum positions.
2. Притисните тастер Дугме за напајање on the front panel. The Power LED will illuminate.
3. To power off, first reduce all levels, then press the Дугме за напајање.

4.2 Adjusting Levels

Gradually increase the level controls on your audio source, then slowly raise the Channel Level Controls (CH A, CH B) на amplifier until the desired volume is achieved. Monitor the Signal/Clip LEDs:

• Signalna LED: Indicates that an audio signal is present.
• ЛЕД клип: If this LED illuminates frequently or stays lit, it indicates that the signal is too strong and clipping is occurring. Reduce the input level from your source or the amplifier's channel level to prevent distortion and potential speaker damage. The "Zero-Attack" limiters are designed to provide reliable overload protection, but continuous clipping should be avoided.

4.3 Подешавања скретнице

The built-in stereo crossover allows for flexible system configuration:

• Пун Опсег: Passes the entire audio spectrum to the speakers. Suitable for full-range loudspeakers.
• Лов-Цут: Filters out high frequencies, sending only low frequencies to the speakers. Ideal for subwoofers.
• Хигх-Цут: Filters out low frequencies, sending only high frequencies to the speakers. Suitable for mid/high frequency speakers.

Adjust the crossover switch on the rear panel according to your speaker setup and desired sound reproduction.

5. Одржавање

Proper maintenance ensures the longevity and optimal performance of your Behringer iNUKE NU1000 ampлифиер.

• Чишћење: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or solvents.
• вентилација: Regularly check that the ventilation openings, especially the rear fan, are free from dust and obstructions. Blocked vents can lead to overheating and reduced performance.
• Инспекција каблова: Periodically inspect all audio and power cables for damage. Replace any frayed or damaged cables immediately.
• Складиштење: Ако чувате amplifier for an extended period, ensure it is in a dry, dust-free environment.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your iNUKE NU1000 ampлифиер.

7. Спецификације

8. Гаранција

Behringer products are designed and manufactured to the highest quality standards. For detailed warranty information, including terms and conditions, please refer to the warranty statement provided with your product or visit the official Behringer webсајт. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.

9. Подршка

If you encounter issues not covered in this manual or require further assistance, please contact Behringer customer support. You can find contact information and additional resources on the official Behringer website. Please have your product model (NU1000) and serial number ready when contacting support.

Онлине ресурси: For the latest drivers, software, and product information, visit ввв.бехрингер.цом.