Прогресно осветљење П6064-31

Упутство за употребу зидне лампе Progress Lighting P6064-31

Модел: П6064-31

1. Производ је готовview

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.

Progress Lighting P6064-31 Wall Lantern, front view.

Слика 1: Предња страна view of the Progress Lighting P6064-31 Wall Lantern.

2. Безбедносне информације

УПОЗОРЕЊЕ: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.

  • Немојте прекорачити максималну снагуtagе наведено за сијалицу.
  • Пажљиво рукујте стакленим компонентама како бисте спречили ломљење.
  • Држите запаљиве материјале даље од светиљке.

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

  • Wall Lantern Fixture (P6064-31)
  • Etched Glass Shade
  • Комплет хардвера за монтажу
  • Инсталациони лист

4. Спецификације

ФеатуреДетаљ
Број моделаП6064-31
БрандПрогресс Лигхтинг
Финисх ТипеFinished (Black)
Димензије производа16.13 cm D x 9.25 cm Š x 6.13 cm V
Тежина артикла4.63 фунти
Тип монтажеИстурена
Ниво отпорности на водуОтпоран на воду
Извор светлости Ватtage100 вати (макс.)
Волtage120 Волтс
Максимални светлосни излаз1600 лумена
Тип извора светлостиIncandescent (Medium Base)
МатеријалАлуминијум
Diagram showing dimensions of Progress Lighting P6064-31 Wall Lantern.

Figure 2: Product dimensions for the P6064-31 Wall Lantern.

5. Упутства за инсталацију

5.1 Пре-инсталација

  1. Искључите струју на прекидачу или кутији са осигурачима.
  2. Carefully unpack the fixture and inspect for any damage.
  3. Ensure all parts listed in Section 3 are present.

5.2 Sizing and Placement Guidance

Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.

Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.

  • Величина уређаја: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
  • Висина монтаже: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
  • Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
  • Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Illustration demonstrating proper sizing and placement of wall lanterns for an entryway.

Слика 3: Прample of wall lantern placement for an entryway.

Illustration demonstrating proper sizing and placement of wall lanterns for a garage.

Слика 4: Прample of wall lantern placement for a garage.

5.3 Ожичење и монтажа

  1. Причврстите држач за монтажу на разводну кутију користећи приложене завртње.
  2. Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
  3. Пажљиво увуците све жице у разводну кутију.
  4. Align the fixture with the mounting bracket and secure it with the provided screws or nuts.

5.4 Bulb Installation

  1. Insert one medium base incandescent bulb (not included) into the socket.
  2. Немојте прекорачити максималну снагуtagе од 100 вати.
  3. Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.

6. Упутство за употребу

Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.

7. Одржавање

To maintain the appearance and functionality of your fixture:

  • Чишћење: Turn off power before cleaning. Wipe the fixture with a soft, damp крпа. Не користите абразивна средства за чишћење или раствараче, јер могу оштетити завршну обраду или стакло.
  • Замена сијалице: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.

КСНУМКС. Решавање проблема

If your fixture is not operating correctly, refer to the following common issues:

ПроблемМогући узрокРешење
Светло се не палиНема струје за уређајCheck circuit breaker, wall switch, and wiring connections.
Сијалица је прегорелаЗамените сијалицу.Уверите се да је сијалица чврсто затегнута.
Трепераво светлоЛабава веза сијалице или ожичењаTighten bulb. Check wiring connections (with power off).
Fixture is dimНетачна сијалица ватtageУверите се да је сијалица ватtage is appropriate and not too low.

9. Гаранција и подршка

Ова светиљка компаније Progress Lighting је покривена 1-годишња ограничена гаранција. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webсајту.

© 2023 Progress Lighting. Сва права задржана.