TFA-Dostmann Bingo Radio-Controlled Alarm Clock

Увод

The TFA-Dostmann Bingo Radio-Controlled Alarm Clock (Model 60.2528.02) is designed for intuitive and easy use. It features a clear display, silent operation, and an automatic LED backlight for visibility at night. The alarm function offers a gentle wake-up with a gradual increase in intensity. Two distinct alarm times can be set simultaneously using dedicated side switches, with a color indicator showing activation status. This alarm clock also displays the day of the week, date, and ambient room temperature, helping to maintain an optimal sleeping environment (ideally between 16°C and 18°C).

Слика 1: Предња страна view of the alarm clock showing the display and control buttons.

Сетуп

1. Инсталација батерије

The alarm clock requires 2 AA batteries (included). To install or replace batteries:

1. Пронађите поклопац одељка за батерије на задњој страни уређаја.
2. Отворите поклопац.
3. Уметните 2 АА батерије, водећи рачуна о исправном поларитету (+/-).
4. Добро затворите поклопац одељка за батерије.

Слика 2: Задња страна view with battery compartment and controls.

2. Initial Power-On and Radio Control Synchronization

Upon battery installation, the clock will automatically attempt to synchronize with the radio-controlled time signal. This process may take several minutes. Ensure the clock is placed away from electronic interference for optimal reception.

• The radio signal icon on the display will flash during synchronization.
• Once synchronized, the icon will become solid, and the correct time, date, and day of the week will be displayed.
• If synchronization fails, the clock will operate as a standard quartz clock. You can manually set the time (see 'Setting Time Manually').

Упутство за употребу

1. Setting Time Manually (if radio control is unavailable)

If the radio-controlled time signal is not received, you can set the time manually:

1. Притисните и држите СЕТ button on the back of the clock until the hour digits flash.
2. Користите + or - buttons on the front to adjust the hour.
3. Притисните СЕТ поново да бисте потврдили сат и прешли на минуте.
4. Користите + or - дугмад за подешавање минута.
5. Наставите да притискате СЕТ to cycle through and adjust year, month, day, and 12/24-hour format as needed.
6. Притисните СЕТ one last time or wait a few seconds for the settings to save.

2. Подешавање аларма (Аларм 1 и Аларм 2)

Сат има два независна аларма.

1. Притисните тастер СЕТ 1 дугме (за аларм 1) или СЕТ 2 button (for Alarm 2) on the front. The alarm time will appear on the display.
2. While the alarm time is displayed, press and hold the respective СЕТ дугме док цифре сати не почну да трепћу.
3. Користите + or - дугмад за подешавање сата аларма.
4. Притисните одговарајуће СЕТ поново притисните дугме да бисте потврдили сат и прешли на минуте.
5. Користите + or - дугмад за подешавање минута аларма.
6. Притисните одговарајуће СЕТ button one last time or wait a few seconds to save the alarm time.

3. Activating/Deactivating Alarms

Use the slider switches on the side of the clock to activate or deactivate each alarm.

• Slide the switch for Alarm 1 (bell icon with '1') to ON to activate. A color indicator will show it's active.
• Slide the switch for Alarm 2 (bell icon with '2') to ON to activate. A color indicator will show it's active.
• Померите прекидач у положај ОФФ да деактивирате аларм.

Слика 3: Страна view showing alarm activation switch.

4. Функција одлагања

Када се огласи аларм, притисните велико SNOOZE & LIGHT button on top of the clock to activate the snooze function. The alarm will pause for approximately 5 minutes and then sound again. This can be repeated multiple times.

5. Automatic Backlight

The clock features an automatic LED backlight for easy viewинг у условима слабог осветљења.

• Лоцирајте АУТО ЛИГХТ switch on the back of the clock.
• Померите прекидач у положај ON to enable the automatic backlight. A light sensor will detect ambient light levels and illuminate the display discreetly in the dark.
• Померите прекидач у положај ОФФ to disable the automatic backlight.

Figure 4: Display with automatic backlight in a dark environment.

6. Приказ температуре

The integrated thermometer continuously measures and displays the ambient room temperature. No special settings are required for this function.

Одржавање

1. Чишћење

To clean the alarm clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.

2. Замена батерије

Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AA batteries. Dispose of used batteries responsibly according to local regulations.

Решавање проблема

• Нема дисплеја или дисплеј је замагљен: Check battery polarity. Replace batteries if they are low.
• Radio control not synchronizing: Move the clock to a different location, away from electronic devices that may cause interference. Ensure it is not near metal objects. Manual time setting is an alternative.
• Аларм се не оглашава: Ensure the alarm switch on the side is set to ON. Verify the alarm time is correctly set.
• Automatic backlight not working: Осигурајте АУТО ЛИГХТ switch on the back is set to ON. The backlight only activates in dark conditions.

Спецификације

Гаранција и подршка

TFA-Dostmann products are manufactured with quality and precision. For warranty information, please refer to the documentation included with your purchase or visit the official TFA-Dostmann website. For technical support or inquiries, please contact TFA-Dostmann customer service.

Доступност резервних делова: 1 година.