Kidde KN-COB-DP2

Kidde Carbon Monoxide Detector User Manual

Model: KN-COB-DP2 | Brand: Kidde

Увод

The Kidde Carbon Monoxide Detector is designed to provide continuous monitoring for carbon monoxide (CO) gas in your home. Utilizing advanced electrochemical sensor technology, it detects the presence of CO and alerts you with an 85-decibel alarm. This plug-in unit features a convenient AA battery backup to ensure protection even during power outages. Its user-friendly design includes a digital display for CO level readings and a Test-Hush button for easy operation and silencing of nuisance alarms.

Kidde Carbon Monoxide Detector, front view

Слика 1: Предња страна view of the Kidde Carbon Monoxide Detector.

Кључне карактеристике

  • Easy Plug-in Installation: Simply plugs into any standard 120V AC power outlet.
  • AA Battery Backup: Two AA alkaline batteries (included) provide continuous protection during power failures.
  • Гласан аларм од 85 децибела: Clearly alerts occupants when carbon monoxide is detected.
  • Дигитални екран: Shows the current carbon monoxide level in parts per million (PPM) and updates every 15 seconds.
  • Peak Level Memory: Records the highest CO concentration detected since the last reset or power cycle.
  • Test-Hush Button: Allows for easy testing of the alarm's functionality and temporarily silences nuisance alarms for approximately 8 minutes.
  • End-of-Life Chirp: Notifies you when the alarm unit needs to be replaced, typically after 10 years of operation.
  • УЛ сертификовано: Meets stringent safety standards for carbon monoxide alarms.

Подешавање и инсталација

The Kidde Carbon Monoxide Detector is designed for straightforward installation. Follow these steps to set up your device:

  1. Распакујте уређај: Carefully remove the carbon monoxide alarm from its packaging.
  2. Battery Installation/Activation: The unit comes with two AA alkaline batteries pre-installed. Ensure the battery pull tab (if present) is removed to activate the batteries. The battery compartment is located on the back of the unit.
  3. Укључите у утичницу: Plug the alarm directly into a standard 120V AC wall outlet. For optimal placement, choose an outlet that is not obstructed and is located near sleeping areas or on every level of your home. The plug is rotatable to accommodate horizontal or vertical outlets.
Hand plugging in the Kidde Carbon Monoxide Detector

Figure 2: Plugging the detector into a wall outlet.

Назад view of Kidde Carbon Monoxide Detector with battery compartment open

Слика 3: Задња страна view showing the battery compartment and warning labels.

Product Placement Guide

For optimal safety, consider the following placement guidelines:

  • Install at least one CO alarm on each level of your home, especially near sleeping areas.
  • Avoid placing the alarm within 6 feet of fuel-burning appliances.
  • Do not place in direct sunlight, near vents, or in areas with high humidity.
Home safety product placement guide diagram

Figure 4: Recommended placement of safety devices in a home.

Сетуп Видеос

Video 1: Demonstrates the plug-in installation and battery backup feature of the Kidde Carbon Monoxide Detector.

Видео 2: Оверview of the Kidde Carbon Monoxide Alarm, highlighting its plug-in design and ease of use.

Упутство за употребу

Once plugged in and batteries are active, the detector will begin monitoring for CO. Observe the LED indicators for status information:

  • Green LED (Operate): A solid green light indicates the unit is operating correctly and no carbon monoxide is detected.
  • Red LED (Alarm): A flashing red light accompanied by an 85-decibel alarm indicates the presence of carbon monoxide.
Kidde Carbon Monoxide Detector with green operate light

Figure 5: Green LED indicating normal operation.

Kidde Carbon Monoxide Detector with red alarm light

Figure 6: Red LED indicating a CO alarm condition.

Дугме Тест/Хусх

Press the 'Test/Reset' button to test the alarm's functionality. The alarm will sound briefly. If the alarm sounds due to non-emergency conditions (e.g., cooking fumes), press the button to temporarily silence it for approximately 8 minutes.

Оператион Видеос

Video 3: Shows the plug-in feature and how to test the alarm.

Video 4: Demonstrates the green light indicator for clear air and the alarm sound.

Одржавање

Regular maintenance ensures the continued reliability of your CO detector.

  • Месечно тестирање: Test your alarm monthly by pressing the Test/Reset button. The alarm should sound.
  • Чишћење: Vacuum the outside of the unit monthly to remove dust and debris. Do not use cleaning solvents or spray directly on the unit.
  • Замена батерије: The 2-AA batteries provide backup power. Replace them when the low battery chirp sounds (a single chirp every 25-30 seconds).
  • End-of-Life Notification: The alarm will emit an end-of-life chirp (two chirps every 30 seconds) after approximately 10 years of operation, indicating it's time for replacement.

Видео снимци одржавања

Video 5: A personal account of how the Kidde CO alarm provided a critical warning, emphasizing its life-saving potential.

Решавање проблема

If your Kidde Carbon Monoxide Detector sounds an alarm, follow these immediate steps:

  1. Operate Test/Reset Button: Press the Test/Reset button.
  2. Call Emergency Services: Immediately call your emergency services (Fire Department or 911).
  3. Move to Fresh Air: Immediately move to fresh air – outdoors or by an open door/window. Do a head count to check that all persons are accounted for. Do not re-enter the premises or move away from the open door or window until emergency services responders have arrived, the premises have been aired out, and your alarm remains in its normal condition.
  4. Праћење: After following steps 1-3, if your alarm re-activates within a 24-hour period, repeat steps 1-3 and call a qualified appliance technician to investigate sources of CO from fuel-burning equipment and appliances.

Решавање проблема са видео записима

Video 6: A user's experience with the alarm activating during a real CO emergency, demonstrating its effectiveness.

Спецификације

Атрибут Детаљ
Бранд Кидде
Број модела КН-ЦОБ-ДП2
Извор напајања Plug In (120 Volts AC) with 2 AA Battery Backup
Тип сензора Електрохемијска
Аларм Лоуднесс 85-decibel
Димензије производа 1.5"Д к 2.75"Ш к 4.05"В
Тежина артикла 0.635 унци
Радна влажност 10% до 95% релативне влажности, без кондензације
Горња оцена температуре 37.8 степени Целзијуса
Цертификати UL Certified (UL 2034, UL217, NFPA72, NFPA101)

Гаранција и подршка

The Kidde Carbon Monoxide Detector comes with a Једногодишња ограничена гаранција произвођача on the alarm unit itself. This warranty begins when the alarm is powered on. If the power-on date is unknown, it should be assumed that replacement is needed when the end-of-life chirp sounds.

For complete instructions, detailed warranty information, or technical support, please refer to the official User Guide and User Manual provided with your product. Digital versions are also available:

For service and return information, you may contact Kidde Customer Service at 1-800-880-6788 or visit Kidde's webсајту.

Важне информације о безбедности

WARNING: CARBON MONOXIDE CANNOT BE SEEN OR SMELLED BUT CAN KILL YOU.

  • Активирање вашег CO аларма указује на присуство угљен-моноксида (CO) који вас може убити.
  • This alarm is not a smoke detector. This Carbon Monoxide alarm will not sense smoke, fire, or any other poisonous gas other than carbon monoxide.
  • USE ONLY ALKALINE BATTERIES SPECIFIED. USE OF DIFFERENT BATTERIES MAY HAVE A DETRIMENTAL EFFECT ON ALARM OPERATION. DO NOT USE LITHIUM BATTERIES IN THIS UNIT.
  • Constant exposure to high or low temperatures and high humidity may reduce battery life.
  • Не фарбајте аларм.

© 2025 Киде. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.