Увод
The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.
Производ је завршенview
The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:
- ДЕЦАИ дугме: Controls the length of the reverb tail.
- ТОНЕ дугме: Adjusts the brightness or darkness of the reverb.
- Дугме МИКС: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
- Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
- ножни прекидач: Укључује или заобилази ефекат.
- Прикључци за улаз/излаз: For connecting your instrument and ampлифиер.
- Улазна снага: For connecting a 9V DC power supply.
Сетуп
- Прикључак за напајање: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
- Прикључак инструмента: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- AmpЛифиер Цоннецтион: Повежите излазну утичницу са леве стране педале на ваш amplifier's input using a standard 1/4-inch instrument cable.
- Stereo Operation (Optional): For stereo output, connect the second output jack to a second ampуређај за подешавање звука или стерео улазни уређај.
Уверите се да су сви прикључци безбедни пре него што укључите amplifier and pedal.
Упутство за употребу
Основна операција
- Укључено: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
- Selecting Reverb Type: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
- Adjusting Reverb Parameters:
- Користите ДЕЦАИ knob to control the duration of the reverb.
- Користите ТОНЕ knob to adjust the frequency content of the reverb, making it brighter or darker.
- Користите МИКС knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.
TonePrint Feature
The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.
Одржавање
- Чишћење: Користите меку, суву крпу за чишћење спољашњости педале. Избегавајте абразивна средства за чишћење или раствараче.
- Замена батерије: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
- Складиштење: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема звука или слаб сигнал | Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp одбио. | Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately. |
| Нежељена бука или зујање | Ground loop, faulty cables, interference from other electronics, improper power supply. | Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices. |
| Effect not engaging (LED off) | Нема струје, неисправан ножни прекидач. | Verify power connection and battery status. If problem persists, contact support. |
| TonePrint not loading | Incorrect app usage, connection issues. | Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance. |
Спецификације
- Модел: T2
- Тежина артикла: 1 pound (approximately 454 grams)
- Димензије производа: 4.61 к 2.48 к 2.91 инча (11.7 к 6.3 к 7.4 цм)
- Извор напајања: 9V DC (center negative) power adapter or 9V battery
- Волtage: 9 Волтс
- Формат сигнала: Аналог
- Хардверски интерфејс: HP-HSC
Гаранција и подршка
TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic webсајт или директно контактирајте њихову корисничку подршку. Сачувајте доказ о куповини за потребе гаранције.
Службено Webсајт: ввв.тцелецтрониц.цом