Altronix Tempo2 Digital Timer Instruction Manual

1. Увод

The Altronix Tempo2 Digital Timer is a versatile two-stage timer designed for various applications requiring precise timing control. It operates on either 12 or 24 volt AC or DC power and features a Single Pole Double Throw (SPDT) contact rated for 2 amps at 115VAC or 28VDC. Key functionalities include an adjustable timing range from 1 second to 60 seconds for timed door release, daily/weekly test modes, one-shot activation, and a door prop alarm. The unit incorporates EEProm memory for settings retention and an LCD display for clear status indication.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Tempo2 Digital Timer to ensure optimal performance and longevity.

Image showing the Altronix Tempo2 Digital Timer unit, typically featuring its LCD display and control buttons.

2. Карактеристике

• Универсал Тво-Сtage Timer: Provides flexible timing control for various applications.
• Флексибилни улаз снаге: Operates on 12V or 24V AC or DC.
• SPDT Contact: Оцењено на 2 Amp / 115VAC / 28VDC.
• Adjustable Timing Range: 1 second to 60 seconds for timed door release.
• Режими рада: Includes daily/weekly test mode and one-shot activation.
• Door Prop Alarm: Integrated alarm function for security applications.
• EEProm Memory: Retains programmed settings during power loss.
• ЛЦД екран: Provides clear visual feedback for programming and status.

3. Подешавање и инсталација

Proper installation is crucial for the reliable operation of the Tempo2 Digital Timer. Ensure all power is disconnected before beginning installation.

3.1 Монтажа

Mount the timer in a secure, dry location, away from direct heat sources or excessive moisture. Use appropriate fasteners for the mounting surface.

3.2 Ожичење

Refer to the wiring diagram provided with your unit for specific connection points. General wiring guidelines are as follows:

• Улазна снага: Connect 12V or 24V AC/DC power to the designated terminals. Observe correct polarity for DC connections.
• Улаз окидача: Connect the trigger source (e.g., door contact, push button) to the trigger input terminals.
• Релејни излаз: Connect the device to be controlled (e.g., door strike, alarm panel) to the SPDT relay output terminals (Common, Normally Open, Normally Closed). Ensure the load does not exceed the 2 Amp / 115VAC / 28VDC rating.

Опрез: Incorrect wiring can damage the unit or connected equipment. If you are unsure about any wiring procedures, consult a qualified electrician or technician.

4. Упутство за употребу

The Tempo2 Digital Timer features an LCD display and control buttons for programming and operation.

4.1 Setting the Timer Duration

1. Access the programming menu using the designated button (refer to the unit's specific button layout).
2. Navigate to the 'Timing Duration' setting.
3. Adjust the time from 1 second to 60 seconds using the up/down buttons.
4. Save the setting and exit the programming menu.

4.2 Daily/Weekly Test Mode

This mode allows for scheduled testing of the timer's functionality without full activation. Consult the unit's programming guide for setting specific test schedules.

4.3 One-Shot Activation

The one-shot activation feature allows the timer to trigger once for the set duration upon receiving a signal. This is useful for single-event operations.

4.4 Доор Проп Аларм

When configured, the door prop alarm will activate if a connected door remains open beyond a pre-set time. This feature enhances security by alerting users to prolonged open door conditions.

5. Одржавање

The Altronix Tempo2 Digital Timer is designed for reliable, long-term operation with minimal maintenance. Follow these guidelines to ensure continued performance:

• Чишћење: Periodically wipe the unit with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• Везе: Годишње проверавајте све ожичене спојеве како бисте били сигурни да су безбедни и да немају корозије.
• Окружење: Уверите се да радно окружење остаје у наведеним опсезима температуре и влажности.

No user-serviceable parts are inside the unit. Refer all servicing to qualified personnel.

КСНУМКС. Решавање проблема

If you encounter issues with your Tempo2 Digital Timer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Altronix technical support for further assistance.

7. Спецификације

• Модел: TEMPO2
• Бренд: Алтроник
• Улазна снага: 12В или 24В АЦ/ДЦ
• Тип контакта: SPDT (Једнополни двоструки преклопник)
• Оцена контакта: 2 Amp @ 115VAC / 28VDC
• Временски опсег: 1 second to 60 seconds (adjustable)
• Меморија: EEProm (retains settings)
• Приказ: ЛЦД
• Карактеристике: Тво-сtage operation, daily/weekly test mode, one-shot activation, door prop alarm
• Тежина артикла: Приближно 0.2 фунте (0.09 кг)
• УПЦ: 782239938292
• ГТИН: 782239938292

8. Гаранција и подршка

Altronix products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product packaging or visit the official Altronix webсајту.

For technical support, troubleshooting assistance, or to inquire about service, please contact Altronix customer support. Have your model number (TEMPO2) and any relevant purchase information ready when contacting support.

Altronix Contact Information:
Please refer to the official Altronix webсајт за најновије контакт податке, укључујући бројеве телефона и адресе е-поште за техничку подршку.