Увод
The Kidde Fire Sentry Smoke Detector, model i9040, is a compact, battery-operated unit designed to provide continuous protection against smoke and fire. Its 4-inch diameter allows for installation in various spaces, including homes, RVs, and mobile homes. This ionization smoke alarm is engineered to detect invisible fire particles associated with flaming fires, sounding an 85-decibel alarm upon detection. Powered by a 9-volt battery, it ensures operation even during power outages. Key features include a test-hush button for easy testing and silencing of nuisance alarms, and a red LED indicator for sensing smoke or fire. The unit also chirps to indicate when the battery needs replacement.

Слика 1: Предња страна view of the Kidde Fire Sentry Smoke Detector.
Подешавање и инсталација
The Kidde i9040 smoke detector is designed for easy, wire-free installation. Follow these steps to set up your device:
- Инсталација батерије: Open the battery compartment. Insert a fresh 9-volt alkaline battery, ensuring correct polarity. The device is powered by a 9-volt battery, providing coverage during power failures.
- Носач: Secure the mounting bracket to your desired location on the ceiling or wall using the provided screws. Ensure the bracket is firmly attached.
- Attach Detector: Align the smoke detector with the mounting bracket and twist clockwise until it locks securely into place.
- Почетни тест: After installation, press and hold the Test-Hush button to ensure the alarm sounds. A red LED will indicate sensing.

Figure 2: Inserting the 9-volt battery into the smoke detector.

Figure 3: The mounting bracket for secure installation.
Видео за инсталацију
Video 1: Official Kidde Battery-Operated Smoke Detector Alarm overview and installation guide.
Упутство за употребу
The Kidde i9040 smoke detector operates automatically once the battery is installed. Familiarize yourself with its key functions:
- Звук аларма: When smoke or fire is detected, the unit will emit an 85-decibel alarm.
- Црвени ЛЕД индикатор: A red LED light will illuminate when the smoke detector is sensing smoke or fire.
- Test-Hush Button: This button serves two primary functions:
- Тест: Press and hold the button to test the alarm's circuitry, horn, and battery function. The alarm should sound briefly.
- Hush: In case of nuisance alarms (e.g., from cooking or shower steam), press the button to temporarily silence the alarm. The alarm will automatically reset after a few minutes if the smoke clears.
- Low Battery Chirp: The smoke detector will emit a regular chirp sound when the 9-volt battery needs to be replaced.

Figure 4: The Test-Hush button for operation and silencing.
Одржавање
Regular maintenance ensures the optimal performance and longevity of your smoke detector:
- Недељно тестирање: It is recommended to test your smoke alarm weekly by pressing the Test-Hush button. This verifies that the alarm is functioning correctly.
- Замена батерије: Replace the 9-volt battery immediately when the unit begins to chirp. This indicates a low battery. Always use a fresh 9-volt alkaline battery.
- Чишћење: Periodically clean the exterior of the smoke detector with a soft, damp cloth. Do not use cleaning sprays or solvents. Ensure the openings are free from dust and debris to maintain proper smoke detection.
Решавање проблема
If your Kidde i9040 smoke detector is not functioning as expected, refer to the following common issues and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Аларм периодично цврчи | Ниска батерија | Замените батерију од 9 волти. |
| Nuisance alarms (false alarms) | Cooking fumes, steam, high humidity, dust | Press the Test-Hush button to silence. Ventilate the area. Clean the smoke detector. |
| Аларм се не оглашава током теста | Dead or improperly installed battery, unit malfunction | Check battery installation. Replace battery. If issue persists, the unit may need replacement. |
| Црвени ЛЕД не трепери | Unit not receiving power or malfunction | Ensure battery is correctly installed. Test the unit. If no response, replace the unit. |
За детаљније решавање проблема, погледајте званичне Водич за решавање проблема (PDF) или тхе Упутство за употребу (ПДФ).
Спецификације
Detailed specifications for the Kidde Fire Sentry Smoke Detector (Model i9040):
| Феатуре | Детаљ |
|---|---|
| Бранд | Кидде |
| Број модела | и9040 |
| Стиле | Battery Powered Smoke Detector |
| Извор напајања | 9V Battery Powered |
| Боја | Бела |
| Димензије производа | 4"Д к 4"Ш к 1.45"В |
| Тежина артикла | 4.2 унци (120 грама) |
| Ниво звука аларма | 85-decibel |
| Тип сензора | јонизација |
| Радна влажност | До 85% релативне влажности, без кондензације |
| Горња оцена температуре | 38 степени Целзијуса |
| Цертифицатион | УЛ Листед |
| УПЦ | 047871260560 |

Figure 5: Compact dimensions of the Kidde i9040 smoke detector.
Гаранција и подршка
The Kidde Fire Sentry Smoke Detector (Model i9040) comes with a 3-year limited manufacturer's warranty on the alarm unit itself. This warranty covers defects in materials and workmanship from the date of purchase. Please note that the warranty does not cover battery performance.
For further assistance, technical support, or warranty claims, please refer to the official Упутство за употребу (ПДФ) or contact Kidde customer service directly.