Atlantic WSM-S

Atlantic Mantova Wall Spout WSM-S Instruction Manual

Model: WSM-S

1. Увод

Thank you for choosing the Atlantic Mantova Wall Spout. This solid brass fixture, featuring an oil-rubbed bronze finish, is designed to enhance outdoor water features with a consistent water flow. This manual provides essential information for the proper installation, operation, and maintenance of your wall spout to ensure optimal performance and longevity.

2. Карактеристике производа

  • Материјал: Solid cast brass construction for durability.
  • завршити: Oil Rubbed Bronze finish.
  • Тежина: Приближно 3 фунти.
  • Препоручени ток: 600 gallons per hour (GPH) for a smooth water flow.
  • Величина улаза: 1.5-inch FIPT (Female Iron Pipe Thread).
  • уземљење: Includes a grounding lug for bonded systems.
  • Компатибилност: Designed for use with Atlantic Spout Lights (sold separately) which thread into a 1-inch threaded tee from the back.
  • Пријаве: Suitable for hardscape walls, formal water features, larger waterfall spillways, or open spillway basins.

3. Безбедносне информације

Always follow local electrical and plumbing codes. Disconnect power to all equipment before installation or maintenance. Ensure proper grounding for all electrical components in your water feature system. If you are unsure about any installation steps, consult a qualified professional.

4. Подешавање и инсталација

4.1 Распакивање

Carefully remove the Mantova Wall Spout from its packaging. Inspect for any damage. Retain packaging for future storage or transport.

4.2 Разматрања пласмана

The wall spout is designed for integration into hardscape walls or similar structures. Ensure the chosen location allows for proper water flow into a basin or pond and provides adequate support for the spout and plumbing.

4.3 Прикључак водовода

  1. The wall spout features a 1.5-inch FIPT inlet. Connect appropriate plumbing (e.g., PVC pipe) to this inlet.
  2. Use thread sealant tape or pipe dope on all threaded connections to prevent leaks.
  3. Ensure the plumbing is securely fastened and supported within the wall structure.

Atlantic Mantova Wall Spout installed in a stone wall, with water flowing smoothly into a basin.Image 1: Atlantic Mantova Wall Spout installed in a stone wall, showing water flowing into a basin.

Two Atlantic Mantova Wall Spouts installed side-by-side in a stone wall, with water flowing into a water feature.Image 2: Multiple Atlantic Mantova Wall Spouts creating a water feature.

4.4 Уземљење

The wall spout includes a grounding lug. For bonded systems, connect a grounding wire to this lug according to local electrical codes. This is crucial for safety in water features with electrical components.

4.5 Optional Spout Light Installation

If installing an Atlantic Spout Light (sold separately), thread it into a 1-inch threaded tee from the back of the wall spout before final installation. Ensure all electrical connections for the light are waterproof and meet safety standards.

Atlantic Mantova Wall Spout with a blue LED light illuminating the water flow at night.Image 3: Mantova Wall Spout with an optional Spout Light, showing illuminated water flow.

5. Упутство за употребу

5.1 Water Flow Adjustment

The recommended flow rate for the Mantova Wall Spout is 600 GPH to achieve a smooth, consistent stream. Adjust your pump's flow rate or use a flow control valve to achieve the desired effect. Excessive flow may cause splashing, while insufficient flow may result in an uneven stream.

5.2 Прво покретање

After installation and filling your water feature, turn on the pump. Allow water to circulate through the system and purge any air. Check all connections for leaks and adjust the water flow as needed.

6. Одржавање

6.1 Редовно чишћење

Periodically inspect the wall spout for debris, mineral buildup, or algae. Clean the spout using a soft brush and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the oil-rubbed bronze finish.

6.2 Зимовање

In freezing climates, it is essential to drain the water feature and remove the wall spout (if possible) or ensure all water is completely drained from the spout and associated plumbing to prevent ice damage. Store the spout in a dry, protected area during winter months.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Uneven or weak water flow
  • Insufficient pump flow
  • Debris in spout or plumbing
  • Ваздух у систему
  • Increase pump flow or adjust valve.
  • Clean the spout and check plumbing for blockages.
  • Allow pump to run to purge air; check for leaks.
Цурење воде из прикључака
  • Лабаве везе
  • Damaged thread sealant
  • Затегните све везе.
  • Reapply thread sealant tape or pipe dope.
Промена боје завршне обраде
  • Изложеност јаким хемикалијама
  • Natural weathering
  • Избегавајте употребу абразивних средстава за чишћење.
  • The oil-rubbed bronze finish may naturally patina over time.

8. Спецификације

ФеатуреДетаљ
БрандАтлантски водени вртови
Број моделаWSM-S
МатеријалМесинг
Финисх ТипеУљем утрљана бронза
Тежина артикла3 фунти
Улазни прикључак1.5-inch FIPT
Препоручени проток600 ГПХ
Укључене компонентеЛуг за уземљење

9. Гаранција и подршка

9.1 Гаранција произвођача

Овај производ је покривен а Двогодишња гаранција произвођача. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the Atlantic Water Gardens official webсајту.

9.2 Корисничка подршка

For technical assistance, replacement parts, or warranty claims, please contact Atlantic Water Gardens customer support. Visit their official webсајт за контакт информације.

10. Видео снимци производа

Atlantic Wall Spouts Overview

Овај видео пружа крајview of Atlantic Wall Spouts, including the Mantova model, demonstrating their aesthetic appeal and water flow characteristics in various outdoor settings. It highlights how these spouts can be integrated into different water features and shows the effect of optional lighting.

© 2024 Atlantic Water Gardens. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.