Упутство за употребу шпорета Primus MultiFuel III

Увод

The Primus MultiFuel III Stove is a robust and versatile cooking system designed for outdoor enthusiasts. It is capable of operating on various liquid fuels including liquid gas, gasoline, kerosene, diesel, and paraffin, ensuring reliable performance even in challenging conditions. Its powerful flame provides efficient heat for cooking. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your stove.

Безбедносне информације

• Always operate the stove in a well-ventilated area to prevent carbon monoxide poisoning.
• Држите запаљиве материјале даље од пећи током рада.
• Ensure the stove is stable on a flat, non-combustible surface before lighting.
• Do not leave an operating stove unattended.
• Allow the stove to cool completely before handling or packing away.
• Use only recommended fuel types. Mixing fuels or using unapproved fuels can be dangerous.
• Чувати ван домашаја деце.

Компоненте

Your Primus MultiFuel III Stove package includes the following components:

• Primus MultiFuel III Stove unit
• ErgoPump (fuel pump)
• Multi-tool for maintenance
• Nylon transport bag
• Виндсцреен
• Рефлектор топлоте
• Various jets for different fuel types (clearly marked)

Image: The Primus MultiFuel III Stove unit, showing the main burner, pot supports, fuel line, and the included ErgoPump.

Сетуп

1. Распакујте компоненте: Carefully remove all components from the transport bag.
2. Select Fuel and Jet: Identify the appropriate jet for your chosen fuel type (liquid gas, gasoline, kerosene, diesel, or paraffin). The jets are clearly marked. Ensure the correct jet is installed in the stove.
3. Connect Pump to Fuel Bottle: Screw the ErgoPump securely onto your Primus fuel bottle (not included). Ensure a tight seal.
4. Connect Fuel Line to Stove: Attach the fuel line from the pump to the stove's fuel inlet. Hand-tighten until secure.
5. Position Stove: Place the stove on a stable, level, non-combustible surface. Extend the pot supports fully. The new pot supports can be folded in and out more compactly for storage.
6. Use Windscreen and Heat Reflector: Position the windscreen around the stove and place the heat reflector under the stove for optimal performance and fuel efficiency, especially in windy or cold conditions.
7. Pressurize Fuel Bottle: Pump the ErgoPump approximately 10-20 times (depending on fuel level and type) to build pressure in the fuel bottle.

Image: The Primus MultiFuel III Stove deployed outdoors, ready for use, with a red fuel bottle visible in the background.

Упутство за употребу

Врсте горива

The Primus MultiFuel III Stove is designed to operate with the following fuel types:

• Liquid Gas (e.g., Primus PowerGas)
• Gasoline (white gas/Coleman fuel recommended)
• керозин
• Диесел
• Парафин

Always use the correct jet for the selected fuel type to ensure proper combustion and safety.

Паљење пећи

1. Open Valve: Slowly open the fuel valve on the pump for a few seconds to allow a small amount of fuel to flow into the burner cup. Close the valve. This is the priming stage.
2. Ignite Fuel: Carefully ignite the fuel in the burner cup using a match or lighter. A small flame will appear. Allow this flame to burn out completely (preheating/priming). This typically takes 30-60 seconds. The stove is properly primed when the flame dies down and the burner head is hot.
3. Open Valve Again: Once priming is complete, slowly open the fuel valve again. The stove should ignite with a strong, blue flame. If it sputters or produces a yellow flame, close the valve, allow it to cool slightly, and repeat the priming process.
4. Подесите пламен: Use the control knob on the fuel line to adjust the flame intensity.

Shutting Down the Stove

1. Close Valve: Turn the fuel valve on the pump to the closed position.
2. Depressurize: For liquid fuels, carefully release the pressure from the fuel bottle by slowly unscrewing the pump a quarter turn until you hear the air escape. Re-tighten the pump.
3. Цоол Довн: Allow the stove to cool completely before disassembling or packing away.

Одржавање

Regular maintenance ensures the longevity and reliable performance of your Primus MultiFuel III Stove.

• Чишћење: After each use, especially with liquid fuels, clean any soot or residue from the burner head and pot supports. Use a soft cloth.
• Jet Maintenance: If the flame becomes weak or irregular, the jet may be clogged. Use the included multi-tool to clean or replace the jet. Always ensure the correct jet is installed for your fuel type.
• Одржавање пумпе: Periodically check the O-rings and leather pump washer in the ErgoPump for wear. Lubricate the leather washer with a few drops of oil if it becomes dry. Replace worn parts using a service kit if necessary.
• Fuel Line: Inspect the fuel line for any kinks, cracks, or damage. Replace if necessary.
• Складиштење: Store the stove and components clean and dry in the nylon transport bag.

Решавање проблема

Спецификације

• Бренд: Примус
• Број модела: 790510
• Димензије: КСНУМКС к КСНУМКС к КСНУМКС цм (КСНУМКС к КСНУМКС к КСНУМКС инча)
• Тежина: 440 г (0.97 лбс)
• Материјал: Алуминијум
• Врсте горива: Liquid Gas, Gasoline, Kerosene, Diesel, Paraffin
• Максимална излазна снага: 2700 Ваттс

Гаранција и подршка

For warranty information or technical support, please refer to the official Primus website or contact your local Primus dealer. Keep your proof of purchase for any warranty claims.

За додатну помоћ, можете посетити Primus official webсајту.