Progress Lighting Helm Collection One-Light 11" LED Flush Mount Instruction Manual

Увод

The Progress Lighting Helm Collection One-Light 11" LED Flush Mount fixture is a contemporary lighting solution designed for both ceiling and wall mounting. Featuring an acrylic diffuser with architectural details, this fixture provides efficient and stylish illumination. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture.

Важне информације о безбедности

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Увек искључите напајање на главном прекидачу пре инсталације или одржавања.
• Do not install this fixture in wet locations. It is designed for indoor use only.
• Уверите се да су сви прикључци сигурни и правилно изоловани.
• This fixture is designed for 120 Volts AC.
• Не покушавајте да модификујете уређај. Било какве модификације могу поништити гаранцију и створити безбедносни ризик.
• ЛЕД извор светлости је интегрисан и корисник га не може заменити.

Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• Helm Collection LED Flush Mount Fixture (1)
• Комплет хардвера за монтажу (1)
• Installation Sheet (1)

Подешавање и инсталација

Follow these steps carefully to install your new fixture. It is recommended to have two people for installation.

Корак 1: Припремите се за инсталацију

1. Turn off power at the circuit breaker or fuse box to avoid electrical shock.
2. Remove the old fixture (if applicable) and disconnect all wiring.
3. Unpack the new fixture and its components. Keep all parts organized.

Корак 2: Монтирајте уређај

Слика: Фронт view of the 11-inch LED flush mount fixture in a brushed nickel finish, showcasing its square design and acrylic diffuser.

Image: Diagram showing the dimensions of the fixture, indicating an 11-inch width and 3-3/4 inch height.

4. Attach the mounting bracket to the junction box using the provided screws. Ensure it is securely fastened.
5. Connect the fixture's wires to the corresponding house wires:
   • Connect the black wire (Live) from the fixture to the black wire from the junction box.
   • Connect the white wire (Neutral) from the fixture to the white wire from the junction box.
   • Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire from the junction box.
   Користите жичане навртке да бисте осигурали све спојеве и омотајте их електричном траком за додатну сигурност.
6. Пажљиво увуците све жице у разводну кутију.
7. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling or wall.

Корак 3: Завршите инсталацију

8. Вратите напајање на главном прекидачу.
9. Тестирајте уређај да бисте били сигурни да ради исправно.

Упутство за употребу

This LED flush mount fixture is designed for simple operation.

• Укључивање/искључивање: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
• Затамњење: This fixture is compatible with most standard dimmer switches. For optimal performance and to avoid flickering, use an LED-compatible dimmer switch. Consult your dimmer switch manufacturer's instructions for proper installation and operation.

Одржавање

To ensure the longevity and appearance of your fixture, follow these maintenance guidelines:

• Чишћење: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic diffuser.
• ЛЕД извор светлости: The LED light source in this fixture is integrated and designed for long-term use. It is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced.
• инспекција: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.

Решавање проблема

Ако имате проблема са уређајем, погледајте следеће уобичајене проблеме и решења:

If the problem persists after trying these solutions, contact Progress Lighting customer support or a qualified electrician.

Спецификације

Гаранција и подршка

This Progress Lighting fixture comes with a 5-годишња ограничена гаранција. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your product, please contact Progress Lighting customer service.

Такође можете посетити званичника Продавница осветљења Progress на Амазону за више информација и понуду производа.