1. Производ је готовview
The XPOWER P-430AT Centrifugal Air Mover is an energy-efficient, high-velocity fan designed for various drying, cooling, and ventilation applications. Its robust construction and versatile features make it suitable for water damage restoration, janitorial tasks, plumbing, and general home use.
Key features include a powerful 1/3 HP motor, three adjustable speeds, four drying positions, built-in power outlets for daisy-chaining, and an adjustable timer.
Figure 1: XPOWER P-430AT Centrifugal Air Mover (Green Model)
Figure 2: Key Features of the P-430AT Air Mover
2. Подешавање
- Распакивање: Carefully remove the air mover from its packaging. Inspect the unit for any signs of damage.
- Пласман: Position the air mover on a stable, flat surface. Ensure the intake and exhaust vents are clear of obstructions. The unit can be placed in various positions (0°, 20°, 45°, 90°) to direct airflow as needed.
- Прикључак за напајање: Plug the 20 ft. industrial power cord into a standard 115V AC grounded outlet. The unit features a wrap-around cord design for tidy storage.
- Daisy Chain (Optional): For extended coverage, up to three additional XPOWER air movers can be daisy-chained using the two built-in power outlets. Ensure the total amperage does not exceed the circuit's capacity.
- Слагање (опционо): For convenient storage or to direct airflow from a higher position, multiple P-430AT units can be stacked up to four units high.
Figure 3: Stackable Design for Storage and Multi-Level Use
3. Упутство за употребу
The P-430AT features intuitive controls for easy operation.
Слика 4: Контролна табла
- Контрола брзине: Use the 3-speed switch to select the desired airflow intensity (1, 2, or 3).
- Функција тајмера: The adjustable timer can be set for continuous operation ('ON') or for durations up to 180 minutes (3 hours). Turn the dial to the desired time, and the unit will automatically shut off once the time expires.
- Положаји сушења: The air mover can be operated in four different angled positions (0°, 20°, 45°, and 90°) using the built-in kickstand to optimize airflow direction for various drying needs.
Figure 5: Adjustable Drying Angles
4. Одржавање
Regular maintenance ensures optimal performance and longevity of your air mover.
- Чишћење: Periodically clean the intake and exhaust grilles to prevent dust and debris buildup, which can restrict airflow. Use a soft, damp cloth for the exterior.
- Складиштење: When not in use, store the air mover in a clean, dry place. Utilize the wrap-around cord design for neat storage of the power cord. The unit's stackable design allows for efficient storage.
- инспекција: Regularly inspect the power cord for any damage. If the cord is damaged, discontinue use and contact customer service for repair.
КСНУМКС. Решавање проблема
If you encounter issues with your XPOWER P-430AT, refer to the following common troubleshooting steps:
- Уређај се не укључује:
- Уверите се да је кабл за напајање безбедно прикључен у функционалну електричну утичницу.
- Check the circuit breaker on the unit. If tripped, press the reset button.
- Verify the timer is not set to 'OFF' or has not expired.
- Низак проток ваздуха:
- Check for obstructions in the intake or exhaust grilles. Clean if necessary.
- Уверите се да је подешавање брзине одговарајуће за задатак.
- Необична бука:
- Turn off the unit and inspect for any loose debris inside the fan housing.
- Уверите се да је јединица постављена на стабилну, равну површину.
If problems persist after attempting these steps, contact XPOWER customer service.
6. Спецификације
Detailed technical specifications for the XPOWER P-430AT Centrifugal Air Mover:
Слика 6: Димензије производа
| Феатуре | Детаљ |
|---|---|
| Бранд | КСПОВЕР |
| Назив модела | П-430АТ |
| Мотор | КСНУМКС / КСНУМКС КС |
| Капацитет протока ваздуха | До 2000 CFM (кубних стопа у минути) |
| Ampераге Драв | 3.8 Amps (at highest setting) |
| Број брзина | 3 |
| Позиције сушења | 4 (0°, 20°, 45°, 90°) |
| Тајмер | Adjustable, up to 180 minutes (3 hours) or continuous 'ON' |
| Built-in Power Outlets | 2 (for daisy-chaining up to 3 additional units) |
| Термичка заштита | Двострука термичка заштита |
| Материјал кућишта | Injection-molded Polypropylene (PP) |
| Димензије производа (Д x Ш x В) | 13.9 cm x 14.8 cm x 14.6 cm |
| Тежина артикла | 16.3 лбс |
| Дужина кабла за напајање | 20 фт. |
| Сертификат о безбедности | ЕТЛ/ЦЕТЛ |
7. Гаранција и подршка
The XPOWER P-430AT Centrifugal Air Mover is backed by a 1-годишња ограничена гаранција произвођачаОва гаранција покрива недостатке у материјалу и изради при нормалној употреби.
For warranty claims, technical assistance, or any questions regarding your product, please contact XPOWER customer service. Keep your purchase receipt as proof of purchase.
XPOWER Manufacture Inc.
California-based customer service team provides comprehensive support.