1. Увод
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hörmann HET/S 2 BiSecur 868 MHz Receiver. Please read these instructions carefully before beginning any procedures and keep them for future reference.
2. Безбедносна упутства
- Installation and electrical connections must be performed by qualified personnel only.
- Disconnect power before performing any installation, maintenance, or repair work.
- Осигурајте радну волtage matches the receiver's specifications (230 - 240 Vac / Vdc).
- Protect the device from moisture and extreme temperatures. The protection class is IP44.
- Do not modify the receiver or its components. Unauthorized modifications can lead to malfunction and void the warranty.
3. Садржај пакета
Проверите да ли су све компоненте присутне и да нису оштећене:
- Hörmann HET/S 2 BiSecur 868 MHz Receiver
- Power adapter (if included with specific kit)
- Монтажни хардвер (шрафови, анкери)
- Ово упутство за употребу
4. Подешавање
4.1 Mounting the Receiver
Select a suitable location for mounting the receiver, ensuring it is protected from direct weather exposure and within range of the BiSecur transmitters. The device has an IP44 protection rating, suitable for outdoor use with limited exposure to water splashes.
- Mark the drilling points on the wall or mounting surface using the receiver's mounting tabs as a template.
- Drill holes and insert appropriate anchors if necessary.
- Secure the receiver firmly using screws.
4.2 Електричне везе
УПОЗОРЕЊЕ: Ensure power is disconnected before making any electrical connections.
The HET/S 2 receiver features two potential-free relays for controlling external devices. Connect the power supply and relay outputs as follows:
- Напајање: Connect the 230 - 240 Vac / Vdc power supply to the designated terminals. Observe correct polarity if using DC power.
- Релејни излази: Connect the devices to be controlled (e.g., gate operator, lighting) to the two potential-free relay contacts. Each relay can handle a switching capacity of 30Vdc / 2.5A (resistive load) or 250Vac / 500W (resistive load).
Image: The Hörmann HET/S 2 BiSecur receiver (grey box) connected to its power adapter, illustrating the main components for setup.
5. Оперативни
5.1 Pairing with BiSecur Transmitters
The HET/S 2 receiver operates on the BiSecur 868.3 MHz frequency and must be paired with compatible Hörmann BiSecur transmitters.
- Activate the learning mode on the receiver (refer to the specific instructions for your receiver model, usually a button press).
- Within the learning window, press the desired button on your BiSecur hand transmitter.
- The receiver will confirm successful pairing (e.g., via an LED indicator).
- Repeat for the second channel if desired, using a different button on the transmitter or another transmitter.
5.2 Функционалност
Each of the two relays can be configured for different functions:
- Активирај/Деактивирај: Toggles the connected device on or off with each press.
- Пулс: Provides a momentary contact closure, typically used for gate or garage door operators.
Refer to the receiver's internal settings or dip switches (if applicable) for specific configuration options.
6. Одржавање
The Hörmann HET/S 2 BiSecur receiver is designed for low maintenance. Regular checks can ensure optimal performance.
- Чишћење: Periodically wipe the exterior of the receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- инспекција: Annually inspect the wiring for any signs of wear, damage, or loose connections. Ensure the mounting is secure.
- Тест функционалности: Regularly test the receiver's operation with your transmitters to ensure reliable communication.
КСНУМКС. Решавање проблема
If you experience issues with your receiver, consult the following table:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Receiver does not respond to transmitter. | Нема струје за пријемник. Transmitter not paired. Батерија предајника је празна. Интерференција. | Проверите напајање. Perform pairing procedure (Section 5.1). Замените батерију предајника. Reduce distance or remove obstacles. |
| Connected device does not activate. | Неисправно ожичење. Неисправност уређаја. Receiver relay fault. | Verify all wiring connections. Test the connected device independently. Contact support if receiver is suspected faulty. |
| Кратак домет. | Obstacles (metal, concrete). Сметње од других уређаја. Receiver or transmitter antenna obstructed. | Relocate receiver or transmitter. Identify and remove interfering devices. Ensure antennas are clear. |
8. Спецификације
- Модел: Hörmann HET/S 2 BiSecur Receiver
- Број модела: 436728
- учесталост: 868.3 MHz BiSecur
- Функција: Activate / Deactivate or Pulse
- Релеји: 2 релеја без потенцијала
- Оператинг Волtage: 230 - 240 Vac / Vdc
- Капацитет пребацивања: 30Vdc / 2.5A (resistive load), 250Vac / 500W (resistive load)
- Класа заштите: ИП44
- Број канала: 2
- Димензије: 110 × 45 × 40 мм
9. Гаранција
Hörmann products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the documentation provided with your product or contact your local Hörmann dealer.
10. Подршка
For technical assistance, troubleshooting beyond this manual, or spare parts, please contact your authorized Hörmann dealer or visit the official Hörmann webсајт. Када контактирате подршку, припремите број модела производа (436728) и информације о куповини.