Onset MX1101

Onset HOBO MX1101 Temperature/Relative Humidity Data Logger User Manual

Модел: МКС1101

1. Увод

The Onset HOBO MX1101 is a wireless data logger designed to measure and transmit temperature and relative humidity data. Utilizing Bluetooth Low Energy (BLE) technology, it allows for convenient data access and configuration via mobile devices running the HOBOmobile app. This manual provides essential information for the proper setup, operation, and maintenance of your MX1101 data logger.

2. Безбедносне информације

  • Do not expose the data logger to extreme temperatures outside its specified operating range.
  • Avoid exposing the device to water or other liquids beyond its IP50 rating, which indicates protection against dust but not water immersion.
  • Use only the specified AAA 1.5 V alkaline batteries. Incorrect battery types may damage the device.
  • Батерије одложите у складу са локалним прописима.
  • Не покушавајте сами да отворите или поправите уређај. Обратите се квалификованом сервисеру.

3. Производ је готовview

The HOBO MX1101 is a compact, self-contained data logger featuring an integrated LCD screen for real-time data display and status indicators. It communicates wirelessly with your mobile device via Bluetooth for setup, data download, and management.

Onset HOBO MX1101 Temperature/Relative Humidity Data Logger

Слика 1: Фронт view of the Onset HOBO MX1101 data logger, showing the LCD display and sensor area.

Кључне карактеристике:

  • Бежична комуникација: Bluetooth Low Energy (BLE) for connection to mobile devices.
  • Integrated LCD: Displays current temperature, relative humidity, logging status, battery level, and memory usage.
  • HOBOmobile App: Free application for iOS and Android for logger configuration, data viewing, and management.
  • Обавештења о алармима: Configurable audible or visual alarms for user-defined thresholds.
  • Burst Logging: Allows for faster logging intervals when sensor readings exceed or fall below specified limits.
  • Велики капацитет меморије: Чува до 84,650 мерења.

4. Подешавање

4.1 Инсталација батерије

  1. Locate the battery compartment on the back of the data logger.
  2. Отворите поклопац одељка.
  3. Insert two AAA 1.5 V alkaline batteries, ensuring correct polarity.
  4. Сигурно затворите поклопац одељка за батерије.

4.2 HOBOmobile App Installation

Download the free HOBOmobile app from the Apple App Store (for iOS devices) or Google Play Store (for Android devices). Тражи "HOBOmobile" by Onset.

4.3 Connecting to the Data Logger

  1. Уверите се да је Блуетоотх омогућен на вашем мобилном уређају.
  2. Open the HOBOmobile app.
  3. The app will scan for nearby HOBO MX data loggers. Select your MX1101 from the list of discovered devices.
  4. Follow the on-screen prompts in the app to establish a connection.

4.4 Конфигурисање логера

Once connected, use the HOBOmobile app to configure the data logger settings, including:

  • Интервал евидентирања: Set how frequently data is recorded (e.g., 1 minute, 5 minutes).
  • Start/Stop Options: Define when logging begins and ends.
  • Прагови аларма: Set high and low limits for temperature and humidity to trigger alarms.
  • Burst Logging Settings: Configure conditions for accelerated logging.
  • безбедност: Optionally set a password for logger access.

5. Оперативни

5.1 Starting and Stopping Logging

Logging is initiated and stopped through the HOBOmobile app. Once configured and started, the logger will record data independently until stopped or its memory is full.

5.2 Viewing Data on the LCD

The built-in LCD screen provides immediate access to current readings and logger status. Information displayed typically includes:

  • Тренутна температура
  • Тренутна релативна влажност
  • Logging Status (e.g., RUN, STOP)
  • Индикатор нивоа батерије
  • Memory Usage Indicator

Note: The LCD's visibility and response time may be affected by temperatures outside the 0 to 50°C (32 to 122°F) range.

5.3 Accessing Data via HOBOmobile App

Connect to the data logger using the HOBOmobile app to:

  • View real-time data and historical graphs.
  • Check the operational status and alarm notifications.
  • Download logged data to your mobile device.
  • Export data in various formats (e.g., CSV, Excel) for further analysis.
  • Делите податке files via email or other applications.

6. Одржавање

6.1 Замена батерије

When the battery indicator on the LCD or in the HOBOmobile app shows low power, replace the two AAA 1.5 V alkaline batteries as described in Section 4.1. Typical battery life is 1 year with a 1-minute logging interval.

6.2 Чишћење

Wipe the exterior of the data logger with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the sensor openings.

6.3 Разматрања животне средине

The MX1101 has an IP50 environmental rating, meaning it is protected against dust ingress but not against water. Operate and store the device within its specified temperature and humidity ranges to ensure optimal performance and longevity.

КСНУМКС. Решавање проблема

  • Cannot connect to logger: Ensure Bluetooth is enabled on your mobile device and the logger is within the 100-foot wireless range. Check logger battery level.
  • Logger not recording data: Verify that logging has been started via the HOBOmobile app. Check memory usage; if full, download data and clear memory.
  • Нетачна очитавања: Ensure the logger is placed in a location representative of the environment being monitored and not exposed to direct sunlight or drafts. Allow sufficient time for the logger to acclimate to new conditions.
  • LCD blank or slow: This is normal if the ambient temperature is outside the 0 to 50°C (32 to 122°F) range. The logger continues to function, but the display may be affected.
  • Kratko trajanje baterije: Frequent connections, very short logging intervals, or continuous use of alarms can reduce battery life. Ensure fresh batteries are used.

For further assistance, refer to the HOBOmobile app's help section or the Onset webсајту.

8. Спецификације

Dimensions of Onset HOBO MX1101 Data Logger

Слика 2: Dimensions of the Onset HOBO MX1101 data logger, showing a width of 3.34 inches and height of 1.44 inches.

ПараметарВалуе
Температурни опсег-20 до 70°Ц (-4 до 158°Ф)
Прецизност температуре±0.21°C from 0 to 50°C (±0.38°F from 32 to 122°F)
Опсег релативне влажности1% до 90% (без кондензације)
Тачност релативне влажности±2% from 20% to 80% typical (max ±4.5% including hysteresis at 25°C); ±6% typical below 20% and above 80%
Меморија128 KB (84,650 measurements maximum)
Трајање батерије1 year typical (with 1-minute logging interval)
Тип батеријеTwo AAA 1.5 V alkaline batteries (user replaceable)
LCD Visibility0 до 50°Ц (32 до 122°Ф)
ДимензијеКСНУМКС к КСНУМКС к КСНУМКС цм (КСНУМКС к КСНУМКС к КСНУМКС инча)
Тежина56 грама (1.98 унци)
Енвиронментал РатингИП50
ЦертификатиCE-Approved
Земља пореклаСједињене Државе

9. Гаранција и подршка

The Onset HOBO MX1101 data logger comes with a manufacturer's warranty of 12 months from the date of purchase. For warranty claims, technical support, or service inquiries, please contact Onset customer support directly or visit their official webсајт за детаљне контакт информације и ресурсе.

Повезани документи - МКС1101

Преview Упутство за употребу HOBO MX1101 регистратора података о температури/релативној влажности
Свеобухватно корисничко упутство за HOBO MX1101 логер података о температури/релативној влажности, које детаљно описује његове карактеристике, спецификације, подешавање, рад и решавање проблема. Сазнајте како да конфигуришете, примените и читате податке са овог логера са омогућеним Bluetooth Smart-ом за праћење животне средине у затвореном простору.
Преview Кратки водич за употребу потопног логера HOBO MX801
Кратки водич за употребу потопног логера HOBO MX801, са детаљним описом његовихview, повезивање сензора, калибрација, конфигурација, распоређивање, преузимање података и обрада.
Преview HOBO MX2300 Series Data Logger: Comprehensive User Manual and Specifications
Explore the HOBO MX2300 Series Data Loggers from Onset, designed for reliable temperature and relative humidity monitoring. This manual details setup, operation, specifications, and data management using the HOBOconnect app via Bluetooth Low Energy.
Преview HOBOware кориснички водич - софтвер за евидентирање почетних података
Свеобухватни водич за кориснике HOBOware софтвера компаније Onset, који детаљно описује како покренути, очитати, приказати и анализирати податке са HOBO логера података и бежичних HOBOнодова. Покрива HOBOware Pro и Lite функције, подешавање, алате за анализу података и управљање уређајима за праћење животне средине.
Преview HOBO Pendant Temperature Data Logger UA-001-xx User Manual
Comprehensive user manual for the Onset HOBO Pendant Temperature Data Logger (models UA-001-08 and UA-001-64), detailing specifications, connection, setup, operation, alarm configuration, and battery replacement.
Преview Асистент за почетну проводљивост: Израчунавање специфичне проводљивости морске воде
Технички водич који детаљно описује прорачуне које је извршио Onset Conductivity Assistant (верзија 2.1) за одређивање специфичне проводљивости и салинитета у морској води, укључујући ревидиране методе нелинеарне компензације температуре и табеле података.