1. Увод
This manual provides instructions for the installation, operation, and maintenance of the Westek In-Wall Programmable Digital Timer, Model ATW-T24. This device is designed to add automated programming functionality to various electrical devices such as lights, heaters, and fans. It features an LCD display for easy programming and a rechargeable battery backup to retain settings during power interruptions.
The timer supports up to 7 weekly programs and includes a random option for enhanced security.
2. Безбедносне информације
УПОЗОРЕЊЕ: To avoid fire, shock, or death; turn off power at the circuit breaker or fuse box and test that the power is off before wiring. All wiring should be performed by a qualified electrician or in accordance with local electrical codes. This device is for indoor use only. Do not exceed the specified electrical ratings.
- Always disconnect power before installation or servicing.
- Уверите се да су сви прикључци сигурни и правилно изоловани.
- Не користити у влажном или дamp локацијама.
- Чувати ван домашаја деце.
3. Садржај пакета
The package for the Westek In-Wall Programmable Digital Timer (Model ATW-T24) includes:
- One (1) Westek In-Wall Programmable Digital Timer, 120 V, 1 HP
- One (1) Lithium Ion battery (pre-installed)
Слика 1: Предња страна view of the Westek In-Wall Programmable Digital Timer. The timer features a white faceplate with a digital display and control buttons.
4. Инсталација
Installation of this in-wall timer requires electrical wiring knowledge. If you are unsure about any part of the installation process, consult a qualified electrician.
- Искључите напајање: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltagе тестер.
- Уклоните постојећи прекидач: Пажљиво уклоните зидну плочу и одврните постојећи прекидач из зидне кутије. Искључите жице са старог прекидача.
- Wire the Timer: Connect the wires to the Westek timer according to the wiring diagram provided with the product packaging. Typically, this involves connecting line (hot), load, and ground wires. Ensure all connections are tight and secure.
- Монтирајте тајмер: Gently push the wired timer into the wall box. Secure it with the provided screws.
- Инсталирајте зидну плочу: Причврстите нову или постојећу зидну плочу преко тајмера.
- Врати снагу: Поново укључите напајање на прекидачу или кутији са осигурачима.
Image 2: The Westek In-Wall Programmable Digital Timer shown with its internal components and wiring connections. This image illustrates the back of the timer where electrical connections are made.
5. Упутство за употребу
The Westek In-Wall Programmable Digital Timer allows for flexible scheduling of connected devices. The LCD display and control buttons facilitate programming.
5.1 Почетно подешавање и подешавање времена
- Upon initial power-up or after a prolonged power outage, the display may show a default time or require setting.
- Use the designated buttons (e.g., "SET," "HOUR," "MINUTE," "DAY") to adjust the current time and day of the week. Refer to the specific button labels on your device for precise controls.
- Confirm the settings to save the current time.
5.2 Programming On/Off Cycles
The timer supports up to 7 custom weekly programs.
- Press the "PROG" or "PROGRAM" button to enter programming mode.
- The display will typically show "PROG 1 ON" or similar. Use the "HOUR," "MINUTE," and "DAY" buttons to set the desired ON time and days for the first program.
- Press "PROG" again to set the "PROG 1 OFF" time and days.
- Repeat for up to 7 programs as needed.
- Exit programming mode by pressing a dedicated "RUN" or "CLOCK" button, or by allowing the timer to time out.
5.3 Random Option
To deter intruders, the timer includes a random ON/OFF feature. When activated, the timer will randomly vary the programmed ON/OFF times by a small interval (e.g., +/- 30 minutes) to simulate occupancy.
- Locate the "RANDOM" or "RND" button.
- Press it to activate or deactivate the random function. An indicator on the LCD may confirm its status.
5.4 Ручно пребацивање
Most digital timers allow for a temporary manual override of the current program without erasinг ит.
- Press the "MANUAL" or "ON/OFF" button to toggle the connected device on or off, overriding the current program until the next programmed event.
5.5 Резервна батерија
The integrated rechargeable Lithium Ion battery maintains the time and programmed settings during power outages. The battery recharges automatically when main power is restored.
6. Одржавање
The Westek In-Wall Programmable Digital Timer requires minimal maintenance.
- Чишћење: To clean the timer, wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit.
- батерија: The internal rechargeable battery is designed for long-term use and typically does not require replacement. If the timer consistently loses settings during power outagе, батерији ће можда бити потребно сервисирање од стране квалификованог техничара.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Timer does not power on. | No power to the switch box; incorrect wiring. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Уређај се не укључује/искључује како је програмирано. | Incorrect program settings; manual override active. | Review and re-enter program settings. Check if manual override is active and deactivate if necessary. |
| LCD display is difficult to read. | Poor lighting conditions; display angle. | Ensure adequate ambient lighting. Adjust viewing angle if possible. |
| Timer loses settings after power outage. | Rechargeable battery backup not functioning. | Allow time for the battery to recharge. If problem persists, contact customer support. |
| Тешкоће са програмирањем тајмера. | Unfamiliarity with programming steps. | Carefully follow the operating instructions in Section 5. Practice programming without a connected load if possible. |
8. Спецификације
- Бренд: Вестек
- Број модела: АТВ-Т24
- Број дела: TMDW30CC
- Волtage: 120 В
- Коњска снага (ХП): 1 ХП
- Материјал: Пластика
- Боја: Бела
- Тежина артикла: 5.9 унци
- Димензије производа: 1.25 к 1.75 к 3 инча
- батерије: 1 литијум-јонска батерија (укључена)
- Стил промене: Пребаци
- УПЦ: 700814916251, 889932723870, 070686506066, 696746170994
- Прво доступно: 26. јул 2005
9. Гаранција и подршка
Опис гаранције: The manufacturer states "Not applicable" for warranty information. Please refer to your retailer's return policy for details on returns or exchanges.
For technical assistance or further inquiries, please contact Westek customer support through their official webсајт или продавницу где је производ купљен.
