Huanyu AEL-1000N Electric Single Column Test Stand Instruction Manual

1. Увод

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of the Huanyu AEL-1000N Electric Single Column Test Stand. The AEL-1000N is designed as a force load test platform, specifically compatible with HF and NK series force measurement gauges. It features a double vertical rod structure, ensuring stability and a wide range of applications.

2. Безбедносне информације

Увек се придржавајте следећих безбедносних упутстава како бисте спречили повреде и оштећење опреме:

• Ensure the test stand is placed on a stable, level surface.
• Проверите волtage (220V/110V) matches the equipment requirements before connecting.
• Do not exceed the maximum load capacity of 1000N.
• Држите руке и широку одећу даље од покретних делова током рада.
• Regularly inspect the equipment for any signs of wear or damage. Do not operate if damaged.
• Само квалификовано особље треба да обавља одржавање или поправке.
• Disconnect power before performing any adjustments or maintenance.

3. Производ је готовview

3.1. Карактеристике

• Electric Load: Provides precise and controlled force application.
• Бесконачна регулација брзине: Allows for fine adjustment of test speed.
• Gear Drive: Ensures compact structure and stable, reliable drive.
• Режими управљања: Supports both manual (point) and automatic control switching functions.
• Компатибилност: Designed to be used with HF and NK series force measurement gauges.
• Разноврсна примена: Suitable for force load, insertion and withdrawal, and destruction tests across various industries.

3.2. Компоненте

The AEL-1000N test stand consists of the main electric single column unit, a test platform, and controls for speed and operation mode. Specific force gauges (HF/NK series) are sold separately and integrate with this stand.

Слика 1: Huanyu AEL-1000N Electric Single Column Test Stand. This image shows the main unit of the test stand, highlighting its robust single-column design and base.

4. Спецификације

5. Подешавање

1. Распакивање: Пажљиво извадите све компоненте из амбалаже. Сачувајте амбалажу за будући транспорт или складиштење.
2. Пласман: Position the test stand on a sturdy, level workbench or floor capable of supporting its weight and the maximum test load. Ensure adequate clearance around the unit for safe operation and access.
3. Прикључак за напајање: Потврдите волtage selector (if present) is set to your local power supply (220V or 110V). Connect the power cord to the test stand and then to a grounded electrical outlet.
4. Mounting Force Gauge: Securely attach your compatible HF or NK series force measurement gauge to the designated mounting points on the test stand. Refer to the force gauge's manual for specific mounting instructions.
5. Инсталација додатне опреме: Install any necessary test fixtures or grips according to your specific testing requirements. Ensure they are firmly attached.

6. Упутство за употребу

1. Укључено: Turn on the main power switch of the test stand.
2. Force Gauge Preparation: Power on your force measurement gauge and perform any necessary calibration or zeroing procedures as per its manual.
3. Изаберите режим: Choose between manual (point) or automatic control mode using the selector switch.
   • Manual (Point) Mode: Allows for precise, incremental movement of the test head.
   • Аутоматски режим: Enables continuous movement at a set speed.
4. Set Test Speed: Adjust the stepless speed regulation knob to achieve the desired test speed within the range of 15-240 mm/min or 60-500 mm/min.
5. Mount Specimen: Carefully mount the test specimen into the installed fixtures. Ensure it is securely held and aligned correctly.
6. Извршите тест:
   • In manual mode, use the directional controls to apply force gradually.
   • In automatic mode, initiate the test, and the stand will move at the set speed.
   Monitor the force gauge readings throughout the test.
7. Заустави тест: Once the test is complete or the desired force/displacement is reached, stop the movement using the controls.
8. Remove Specimen: Carefully remove the tested specimen from the fixtures.
9. Искључивање: Turn off the force gauge, then the main power switch of the test stand.

7. Одржавање

Regular maintenance ensures the longevity and accuracy of your AEL-1000N test stand.

• Чишћење: Keep the test stand clean and free from dust, debris, and corrosive substances. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• подмазивање: Periodically inspect the vertical rods and moving parts for smooth operation. Apply a light, appropriate lubricant if necessary, following manufacturer recommendations for industrial equipment.
• инспекција: Regularly check all cables, connections, and mounting hardware for tightness and signs of wear or damage. Replace any worn or damaged parts immediately.
• Складиштење: When not in use for extended periods, store the test stand in a clean, dry environment, protected from extreme temperatures and humidity.

КСНУМКС. Решавање проблема

For issues not listed above or if solutions do not resolve the problem, please contact Huanyu customer support.

9. Гаранција и подршка

Huanyu products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Huanyu website. For technical support, spare parts, or service inquiries, please contact Huanyu customer service through the details provided on our webсајт или вашу документацију о куповини.

Контакт информације: Please refer to your product packaging or the official Huanyu webсајт за најновије контакт информације.