Kidde i12010SCO Hardwired Combination Smoke and Carbon Monoxide Alarm

1. Увод

The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm designed to provide protection from two hazards in a single unit. It features a 10-year sealed lithium battery backup, eliminating the need for battery replacement throughout the alarm's lifespan. This alarm utilizes intelligent sensor technology to offer a fast response to various fire types, including smoldering and fast-flaming fires, while also detecting carbon monoxide (CO) and reducing nuisance alarms.

Кључне карактеристике:

• Двострука заштита: Детектова и дим и угљен-моноксид.
• 10-Year Sealed Battery Backup: No battery replacement required for the life of the alarm.
• Voice Warning System: Verbally announces "Fire" or "Warning, Carbon Monoxide" to clearly identify the hazard.
• Ionization Sensing Technology: Optimized for detecting fast-flaming fires.
• Функција тишине: Temporarily silences nuisance alarms for approximately 9 minutes.
• Повезивање: Can connect with up to 24 compatible Kidde devices (18 initiating).

Figure 1: Kidde i12010SCO highlighting its 10-year battery and voice alarm capabilities.

2. Важне информације о безбедности

WARNING: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION AND OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, INJURY, OR DEATH.

• Овај аларм је намењен само за употребу у стамбеним условима.
• Regularly test the alarm weekly by pressing the test/reset button.
• Не фарбајте аларм. Боја може зачепити сензорске коморе и спречити правилан рад аларма.
• Do not install in areas with extreme temperatures or humidity.
• Уверите се да је напајање ИСКЉУЧЕНО на прекидачу пре инсталације или одржавања.

3. Садржај пакета

Проверите да ли су следеће ставке укључене у ваш пакет:

• Kidde i12010SCO Combination Smoke and Carbon Monoxide Alarm
• Носач
• Електрична инсталација
• Водич за инсталацију и кориснички приручник

Слика 2: Предња страна view of the Kidde i12010SCO alarm with its wiring harness.

4. Инсталација

This alarm is designed to be hardwired into a 120V AC circuit. It is recommended that a qualified electrician install this unit.

Кораци инсталације:

1. Искључите напајање: Before beginning installation, ensure the power to the circuit where the alarm will be installed is turned off at the main fuse or circuit breaker panel.
2. Remove Old Alarm (if applicable): If replacing an existing alarm, carefully remove it from its mounting bracket and disconnect the wiring harness.
3. Инсталирајте носач за монтажу: Secure the new mounting bracket to the electrical box using the provided screws. Ensure the bracket is firmly attached.
4. Повежите кабловски сноп: Connect the new wiring harness to the household wiring. Match the wire colors: black to black (hot), white to white (neutral), and red to red (interconnect, if applicable). Use wire nuts to secure connections. If not interconnecting, cap the red wire.
5. Attach Alarm to Harness: Plug the alarm unit into the wiring harness.
6. Mount Alarm: Поравнајте аларм са носачем за монтажу и окрећите га у смеру казаљке на сату док се сигурно не закључа на своје место.
7. Activate Battery Backup: Once the alarm is mounted, remove the battery activation tag (if present) to activate the sealed 10-year lithium battery backup.
8. Врати снагу: Turn the power back on at the main fuse or circuit breaker panel.
9. Тест аларм: Press and hold the Test/Reset button for a few seconds until the alarm sounds and the voice announcement is heard.

Figure 3: Proper installation of the alarm on a ceiling.

Figure 4: The wiring harness for connecting the alarm to household electrical wiring.

5. Операција

Voice Warning System:

The alarm provides clear voice announcements to distinguish between smoke and carbon monoxide hazards:

• Smoke Detected: The alarm will sound and announce "Fire! Fire!"
• Carbon Monoxide Detected: The alarm will sound and announce "Warning, Carbon Monoxide!"

Figure 5: Visual representation of the voice warning system for smoke and carbon monoxide.

Дугме за тестирање/ресетовање:

• тестирање: Press and hold the Test/Reset button to test the alarm's circuitry and voice announcement. The alarm will cycle through its warning sounds and voice messages.
• Ресетовање: If the alarm is sounding due to a detected hazard, pressing the Test/Reset button will silence the alarm for a short period. If the hazard persists, the alarm will reactivate.

Функција тишине:

The Hush feature temporarily silences the alarm for approximately 9 minutes in case of a nuisance alarm (e.g., cooking smoke). To activate, press the Test/Reset button during an alarm. The alarm will enter Hush mode only if it is in an alarm state. After 9 minutes, the alarm will automatically reset and resume normal operation.

Figure 6: Location of the Test/Hush button on the alarm unit.

интерконекција:

This alarm can be interconnected with up to 24 compatible Kidde devices, with a maximum of 18 initiating devices. When one interconnected alarm senses a hazard, all interconnected alarms will sound, providing early warning throughout your home.

Figure 7: The Smart Interconnect feature allows multiple alarms to communicate.

6. Одржавање

батерија:

The Kidde i12010SCO features a sealed 10-year lithium battery that does not require replacement. The alarm is designed to operate for 10 years from the date of activation. After 10 years, the unit should be replaced.

Cleaning Your Alarm:

It is recommended to clean your alarm every six months to prevent dust and debris from interfering with its operation.

• Use a soft brush or a vacuum cleaner with a soft brush attachment to remove dust from the alarm's vents.
• Do not use water, cleaners, or solvents, as these can damage the unit.

КСНУМКС. Решавање проблема

8. Спецификације

Figure 8: Dimensions of the Kidde i12010SCO alarm.

9. Гаранција и подршка

Информације о гаранцији:

Kidde offers a limited warranty for this product. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase for warranty claims.

Корисничка подршка:

For technical assistance, troubleshooting, or warranty inquiries, please contact Kidde Customer Support. Contact information can typically be found on the product packaging or on the official Kidde website. It is recommended to have your product model number (i12010SCO) and date of purchase available when contacting support.

Онлине ресурси: For additional information, FAQs, and product registration, visit the official Kidde webсајт: ввв.кидде.цом