1. Производ је готовview
The Tornado Electric Water Heater Model TEEE-30MW is designed to provide efficient and reliable hot water for your household needs. This 30-liter capacity water heater features a durable enameled inner tank, advanced safety mechanisms, and an intuitive LED indicator for heating status. Its compact design and robust construction ensure long-lasting performance.
Слика 1: Предња страна view of the Tornado Electric Water Heater.
Кључне карактеристике:
- Капацитет: 30 литара
- Снага: 1500 Ваттс
- ЛЕД индикатор: Illuminates during the water heating process.
- Унутрашњи резервоар: Enameled and anti-rust for extended durability.
- Сигурносне карактеристике: Equipped with an overheat sensor, dry heating sensor, and a non-return safety valve.
- Грејни елемент: Copper heating element with magnesium anodes for corrosion protection.
- Материјал тела: Specially treated to resist water vapor and humidity.
- Контролна табла: Convenient front-mounted control panel.
- изолација: High-density insulating foam for energy efficiency.
- Аутоматско поновно покретање: Automatic restart function.
2. Подешавање и инсталација
Proper installation is crucial for the safe and efficient operation of your water heater. It is highly recommended that installation be performed by a qualified professional.
2.1 Монтажа бојлера
- Select a suitable wall location capable of supporting the water heater's weight when full (approximately 45 kg for the 30-liter model).
- Mark the positions for the mounting brackets on the wall. Ensure the marks are level and correctly spaced according to the unit's dimensions.
- Drill holes and securely fasten the mounting brackets to the wall using appropriate hardware (not included).
- Carefully lift and hang the water heater onto the installed brackets, ensuring it is stable and level.
Слика 2: Страна view with mounting brackets and connections.
2.2 Прикључци за воду
- Identify the cold water inlet (usually marked blue or with a blue ring) and the hot water outlet (usually marked red or with a red ring). Both connections are 1/2 G.
- Install the non-return safety valve on the cold water inlet pipe. This valve prevents water backflow and excessive pressure buildup.
- Connect the cold water supply line to the inlet and the hot water output line to the outlet. Use appropriate plumbing fittings and ensure all connections are watertight.
- Open the main water supply and check for any leaks. Allow the tank to fill completely before proceeding to electrical connection.
2.3 Електрични прикључак
- Ensure the water heater is properly grounded to prevent electrical hazards.
- Connect the water heater to a dedicated electrical circuit with appropriate voltage and current ratings (1500W).
- Verify that all electrical connections are secure and comply with local electrical codes.
3. Упутство за употребу
Once installed and filled with water, your Tornado Electric Water Heater is ready for operation.
3.1 Укључивање и искључивање
- To turn on the water heater, ensure it is plugged into a suitable power outlet and the main power switch (if applicable) is in the 'ON' position.
- The 'Power On' indicator light will illuminate, indicating the unit is receiving power.
- To turn off the water heater, switch off the main power or unplug the unit.
Figure 3: Power On and Heating indicators.
3.2 Подешавање температуре
- The water heater features a temperature dial on the front panel, ranging from 'MIN' to 'MAX'.
- Rotate the dial to your desired temperature setting. Turning towards 'MAX' will increase the water temperature.
- The 'Heating' indicator light will illuminate when the water heater is actively heating water and will turn off once the set temperature is reached.
Figure 4: Temperature adjustment dial.
4. Одржавање
Редовно одржавање осигурава дуготрајност и ефикасност вашег бојлера.
4.1 Генерално чишћење
- Periodically wipe the exterior of the water heater with a soft, damp тканина. Немојте користити абразивна средства за чишћење или раствараче.
- Ensure the area around the water heater is kept clean and free from obstructions.
4.2 Anode Rod Inspection and Replacement
- The water heater is equipped with magnesium anodes to protect the inner tank from corrosion.
- These anode rods should be inspected annually by a qualified technician and replaced if significantly depleted.
4.3 Пражњење резервоара
- If the water heater will be out of use for an extended period or in areas prone to freezing, the tank should be drained.
- Искључите напајање бојлера.
- Затворите улазни вентил хладне воде.
- Отворите славину за топлу воду у свом дому да бисте смањили притисак.
- Спојите црево на одводни вентил на дну бојлера и усмерите га до одговарајућег одвода.
- Open the drain valve and allow all water to empty from the tank.
4.4 Safety Valve Check
- Periodically check the non-return safety valve for proper operation. Refer to the safety valve manufacturer's instructions for specific testing procedures.
КСНУМКС. Решавање проблема
Пре него што контактирате корисничку подршку, погледајте следећи водич за решавање уобичајених проблема.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема топле воде | Нема напајања Термостат је постављен прениско Квар грејног елемента | Проверите прикључак за напајање и осигурач Подесите термостат на вишу поставку Обратите се сервисеру |
| Недовољно топле воде | Термостат је постављен прениско High hot water demand Накупљање седимента у резервоару | Повећајте подешавање температуре Allow more time for reheating Drain and flush the tank (professional service recommended) |
| Вода је преврућа | Термостат је постављен превисоко | Смањите подешавање температуре |
| Цурење воде | Лабаве везе Неисправан сигурносни вентил Корозија резервоара | Затегните везе Inspect and replace safety valve Обратите се сервисеру |
| Heating indicator not lighting up | Water already at set temperature Проблем са грејним елементом | This is normal if water is hot enough Обратите се сервисеру |
Сигурносне карактеристике: The water heater is equipped with an overheat sensor and a dry heating sensor. If these sensors detect abnormal conditions, the heater may automatically shut off to prevent damage. If this occurs, turn off the power, wait for the unit to cool, and then restart. If the problem persists, contact customer support.
6. Спецификације производа
Detailed technical specifications for the Tornado Electric Water Heater Model TEEE-30MW.
Слика 5: Димензије производа.
| Феатуре | Детаљ |
|---|---|
| Број модела | ТЕЕЕ-30МВ |
| Капацитет | 30 литара |
| Елецтрицал Повер | 1500 Ваттс |
| Боја | Бела |
| Материјал унутрашњег резервоара | Enameled, Anti-rust |
| Сигурносне карактеристике | Overheat Sensor, Dry Heating Sensor, Non-return Safety Valve |
| Грејни елемент | Copper with Magnesium Anodes |
| Материјал тела | Special treated material, resistant to water vapor and humidity |
| Изолација | Пена високе густине |
| Улаз хладне воде | 1/2 Г. |
| Излаз топле воде | 1/2 Г. |
| Димензије (В к Ш к Д) | 450 к 450 к 490 мм |
| Нето тежина | 15.6 кг |
| Бруто тежина | 18.2 кг |
| Земља порекла | Египат |
7. Гаранција и подршка
7.1 Информације о гаранцији
This Tornado Electric Water Heater Model TEEE-30MW comes with a 5-year full free warranty provided by the manufacturer/brand from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims.
7.2 Корисничка подршка
For any technical assistance, warranty claims, or further inquiries, please contact Tornado customer service. Refer to your product packaging or the manufacturer's official webсајт за најновије контакт информације.