1. Готовоview
The yueton 1-8S Lipo Battery Tester Monitor is a compact device designed to test the working state of lithium batteries and provide a low voltage alarm. It is compatible with 1-8S Lipo, LiFe, LiMn, and Li-ion battery types. The device features a clear LED indicator for voltage display and an adjustable alarm function to prevent over-discharge.
2. Безбедносне информације
- Always connect the battery tester to the balance lead of your battery with correct polarity. Incorrect connection can damage the device and the battery.
- Do not short-circuit the pins of the battery tester.
- Држите уређај сувим и даље од влаге.
- Не покушавајте да раставите или модификујете уређај.
- Use the tester within its specified voltage ranges (0.1V-4.5V per cell, 0.5V-36V total).
- The alarm is intentionally loud to be heard in noisy environments. Exercise caution when connecting in quiet areas.
3. Садржај пакета
- 1 x yueton Lipo Battery Tester Monitor
4. Карактеристике производа
- Supports 1-8S Lipo/Li-ion/LiMn/Li-Fe batteries.
- Волtage detection precision: 0.01V.
- Јединица волtage display range: 0.1V-4.5V.
- Тотал волtage display range: 0.5V-36V.
- 1S test mode voltagОпсег: 4.0В-30В.
- Лов волtage alarm mode for 2-8S batteries.
- Adjustable alarm set value range: OFF-2.7V-3.8V.
- Integrated LED indicator for clear voltagе дисплеј.
- Loud buzzer alarm for audible low voltagе упозорења.
5. Подешавање
To set up the yueton Lipo Battery Tester Monitor, simply connect the balance lead of your 1-8S lithium battery to the corresponding pins on the tester. Ensure the polarity is correct. The device will automatically detect the cell count and display the total voltage, then cycle through individual cell voltagес.
Слика 1: Предња страна view of the yueton Lipo Battery Tester Monitor. This image shows the device's LED display, the connection pins for the battery balance lead, and text indicating its features and alarm settings.
6. Упутство за употребу
Once connected, the tester will immediately power on and display the total voltage of the battery. It will then cycle through the voltage of each individual cell. The LED display provides real-time voltagе читања.
Слика 2: Задња страна view of the yueton Lipo Battery Tester Monitor. This image provides a view of the device's internal components, including the two circular buzzers responsible for the audible alarm.
7. Setting the Alarm Voltage
Ниска волtage alarm can be set to a desired threshold. The default pre-set value is 3.3V per cell.
- Locate the small push button on the top side of the device.
- Press the button to cycle through the available alarm voltage settings (OFF, 2.7V, 2.8V, ..., 3.8V).
- Release the button when the desired voltage is displayed. The setting will be automatically saved.
Када је волtage of any cell drops below the set alarm value, the device will emit a loud buzzer sound and a red LED light will illuminate, indicating a low voltagе стање.
8. Одржавање
- Одржавајте уређај чистим и без прашине и остатака.
- Чувати у сувом окружењу када се не користи.
- Избегавајте испуштање или излагање уређаја јаким ударима.
КСНУМКС. Решавање проблема
- Уређај се не укључује: Ensure the battery is charged and the balance lead is connected correctly with the right polarity. Check for any visible damage to the pins or wires.
- Alarm is too loud: The device is designed with a loud alarm for clear audibility in various environments. This is a normal operational characteristic.
- Нетачна очитавања: Verify that the battery is functioning correctly. If readings remain inconsistent, the device may require replacement.
10. Спецификације
| Спецификација | Валуе |
|---|---|
| Бранд | yueton |
| Број модела | 5060768824800 |
| Извор напајања | Баттери Поверед |
| Стиле | Дигитал |
| Боја | Red+Black |
| Тежина артикла | 9.07 г (0.32 унци) |
| Мин. Оператинг Волtage | 2.7 Волтс |
| Меасуремент Типе | Волтметар |
| Волtage Detection Precision | 0.01В |
| Јединица Волtagе Опсег приказа | 0.1В-4.5В |
| Тотал Волtagе Опсег приказа | 0.5В-36В |
| 1S Test Mode Voltagе Распон | 4.0В-30В |
| Лов Волtage Alarm Mode | For 2-8S batteries |
| Alarm Set Value Range | OFF-2.7V-3.8V |
| Димензије | 1.57" x 0.94" (4 цм x 2.4 цм) |
Figure 3: Dimensions of the yueton Lipo Battery Tester Monitor. This image illustrates the physical size of the device, showing its length as 4cm (1.57 inches) and width as 2.4cm (0.94 inches).
11. Гаранција и подршка
Specific warranty information for this product is not provided in the available data. For support or warranty inquiries, please contact the retailer or manufacturer directly.
