1. Производ је готовview
The Testo 175 T3 temperature logger is designed for precise temperature recording across two channels using external thermocouple probes (Type T or Type K). It is suitable for applications requiring simultaneous temperature monitoring, such as heating system checks or industrial process control. The device features a clear display for current, min/max values, limit violations, and battery life, ensuring high data security with a large memory capacity and long battery life.
Слика 1: Предња страна view of the Testo 175 T3 Temperature Logger, showing its display and control button.
Figure 2: The Testo 175 T3 in use within a meat display case, demonstrating its application in food temperature monitoring.
Figure 3: The Testo 175 T3 mounted inside a refrigerated transport vehicle, illustrating its use for monitoring temperatures during transit.
2. Садржај кутије
Након распакивања, проверите да ли су све компоненте присутне:
- Testo 175 T3 temperature logger (2-channel, with external sensor connections for thermocouple type T and type K)
- зидни носач
- Закључај
- Baterije (3 x AAA)
- Протокол калибрације
Напомена: External thermocouple probes and a USB cable for programming/reading are sold separately and are required for full functionality.
3. Подешавање
- Инсталација батерије: The Testo 175 T3 uses 3 AAA batteries. These are included. Ensure correct polarity when inserting. The logger is designed to retain saved measurement data even if batteries are empty or replaced.
- Монтажа: Use the provided wall bracket to securely mount the logger in the desired measurement location.
- Веза сонде: Connect the external thermocouple probes (Type T or Type K, purchased separately) to the two designated connections on the logger. The logger requires at least one external probe to be connected for operation.
- Почетно укључивање: Once batteries are installed and probes connected, the device will power on. The display will show current readings.
4. Упутство за употребу
4.1. Прикажи информације
The clear display provides the following information:
- Current measuring values for both channels.
- Minimum (Min) and Maximum (Max) recorded values.
- Set limit values.
- Indications of limit value violations.
- Remaining battery life.
4.2. Прикупљање података
The Testo 175 T3 automatically logs data at a user-defined measuring rate, ranging from 10 seconds to 24 hours. It has a memory capacity of up to 1 million readings.
4.3. Programming and Data Analysis
To program the data logger and analyze measurement data, a USB cable (optional) and software are required. Three software versions are available:
- ComSoft Basic: Free download for fast programming and easy data analysis.
- ComSoft Professional: Optional purchase for more detailed analysis possibilities.
- ComSoft CFR 21 Part 11: Optional purchase, suitable for pharmaceutical sector requirements (CFR 21 Part 11).
Figure 4: The Testo 175 T3 connected to a laptop for programming and data analysis using ComSoft software.
5. Одржавање
- Чишћење: The device has an IP65 protection class, offering protection against dust ingress and water spray/jets. For cleaning, wipe the exterior with a damp тканина. Немојте користити абразивна средства за чишћење или раствараче.
- Замена батерије: When the battery indicator shows low power, replace the 3 AAA batteries. Ensure the device is powered off before replacement. Data security is maintained during battery changes.
- калибрација: Regular calibration is recommended to ensure continued accuracy. Refer to the calibration protocol included with your device for details.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Уређај се не укључује. | Мртве или неправилно инсталиране батерије. | Замените батерије (3 x AAA) и водите рачуна о исправном поларитету. |
| No temperature readings displayed. | No external probe connected or probe faulty. | Connect at least one external thermocouple probe. Check probe connection and integrity. |
| Cannot connect to PC for data transfer. | USB cable not connected, driver issue, or software not running. | Ensure USB cable is securely connected. Install necessary drivers. Launch ComSoft software. |
| Нетачна очитавања. | Probe damage or calibration required. | Inspect probes for damage. Consider professional calibration. |
7. Техничке спецификације
| Параметар | Валуе |
|---|---|
| Temperature - TC Type K (NiCr-Ni) | |
| Мерни опсег | -50 до +1000 °Ц |
| Прецизност | ±0.5 °C (-50 to +70 °C), ±0.7 % of mv (+70.1 to +1000 °C) |
| Резолуција | 0.1 °Ц |
| Temperature - TC Type T (Cu-CuNi) | |
| Мерни опсег | -50 до +400 °Ц |
| Прецизност | ±0.5 °C (-50 to +70 °C), ±0.7 % of mv (70.1 to +1000 °C) |
| Резолуција | 0.1 °Ц |
| Општи технички подаци | |
| Температура складиштења | -20 до +55 °Ц |
| Димензије | 89 к 53 к 27 мм |
| Радна температура | -20 до +55 °Ц |
| Класа заштите | ИП65 |
| Канали | 2 спољна |
| Мерење брзине | 10 s - 24 h |
| Тип батерије | 3 x AIMn type AAA or Energizer |
| Трајање батерије | 3 years at 15 min. meas. rate |
| Меморија | 1,000,000 мерене вредности |
| Тежина артикла | 130 г |
| Материјал | Поликарбонат (ПЦ) |
| Тип приказа | ЛЦД |
| Повезивање | USB (with optional cable) |
8. Информације о гаранцији
The Testo 175 T3 Temperature Logger comes with a 2 година гаранције. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the documentation provided with your product or contact Testo customer support.
9. Подршка и контакт
For technical support, software downloads (ComSoft Basic), or inquiries regarding optional accessories (probes, USB cable, ComSoft Professional/CFR 21 Part 11), please visit the official Testo website or contact your local Testo distributor. Contact information can typically be found on the Testo official webсајту.