ДневникTag UTRIX-16 PDF Temperature Data Logger User Manual

1. Увод

ДневникTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Безбедносне информације

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Do not attempt to open or modify the device, as this will void the warranty and may cause damage.
• Батерије одложите у складу са локалним прописима.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• ДневникTag UTRIX-16 PDF Temperature Data Logger
• Кориснички приручник (овај документ)

4. Девице Оверview

The UTRIX-16 features a compact design with clear indicators and control buttons.

Слика 1: Фронт view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• Дугме СТОП: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Интегрисани УСБ конектор: Located at the bottom, used for connecting to a computer for configuration and data download.

Слика 2: ДневникTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Подешавање

5.1 Почетна конфигурација

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webсајту.

1. Download and install the LogTag Софтвер за анализатор из ДневникTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


Слика 3: ДневникTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. ДневникTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Информације о батерији

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Операција

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. Притисните и држите СТАРТ/Означи button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. Притисните и држите СТОП button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• Кратко притисните СТАРТ/Означи button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. The device will appear as a removable drive.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Софтвер за анализатор.

8. Одржавање

8.1 Чишћење

Обришите уређај меком крпомamp тканина. Немојте користити абразивна средства за чишћење или раствараче.

8.2 Замена батерије

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

КСНУМКС. Решавање проблема

10. Спецификације

11. Гаранција и подршка

ДневникTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webсајт или контактирајте локалног дистрибутера. Сачувајте рачун као доказ о куповини.

Official LogTag Webсајт: ввв.логtag-рецордерс.цом