PeakTech 5086 Digital LED Lux Meter User Manual

1. Увод и крајview

The PeakTech 5086 is a precise 3 3/4 digit (max. 3999) LCD digital LED Lux Meter designed for measuring the light intensity of various light sources, including LED, fluorescent, and traditional incandescent lamps with different light colors. It measures in Lux (lx), Footcandle (FC), or Candela (cd).

Unlike simpler lux meters that are typically calibrated for incandescent bulbs at 2856 K and provide inaccurate results for different color temperatures, the PeakTech 5086 allows for the adjustment of various light source factors. This enables accurate measurements for neon lampс, жаруља лamps, red, blue, yellow LEDs, or daylight. The device features 10 freely adjustable correction factors for different light sources, 99 memory locations for measurement values, and useful measurement functions such as minimum, maximum, and average value tracking, as well as data hold. This makes it suitable for professional applications in occupational safety or lighting system evaluation.

Кључне карактеристике:

• Measures light intensity in Lux (lx), Footcandle (FC), or Candela (cd).
• 10 freely adjustable light source factors for various lamp врсте.
• Suitable for colored light sources, LEDs, and other bulb types.
• Measurement refresh rate: approximately 2.5 times per second.
• External sensor with cosine angle correction.
• Data Hold, Minimum/Maximum/Average (AVG) measurement functions.
• Automatic range selection and zero adjustment.
• 99 memory locations for storing measurement values.

2. Безбедносне информације

Молимо вас да прочитате и разумете сва безбедносна упутства пре руковања уређајем. Непоштовање ових упутстава може довести до повреда или оштећења уређаја.

• Не излажите уређај екстремним температурама, влажности или директној сунчевој светлости.
• Избегавајте јаке вибрације или ударце.
• Не покушавајте да отворите или модификујете уређај. Сва сервисирања препустите квалификованом особљу.
• Уверите се да су батерије уметнуте са исправним поларитетом. Извадите батерије ако уређај неће бити коришћен дуже време.
• Keep the sensor clean and free from obstructions to ensure accurate readings.

3. Садржај пакета

Проверите да ли се у вашем пакету налазе све ставке наведене у наставку:

• PeakTech 5086 Digital LED Lux Meter with external sensor
• Торба за ношење
• Батерије (унапред инсталиране или укључене засебно)
• Упутство за употребу

4. Изглед уређаја

The PeakTech 5086 consists of a main unit with an LCD display and control buttons, and an external light sensor connected via a coiled cable. The sensor is equipped with a protective cap.

Слика 4.1: PeakTech 5086 Digital LED Lux Meter showing the main display unit and the external light sensor with its protective cap removed.

Контроле и екран:

• ЛЦД екран: Shows measurement values, units (Lux, FC, Cd), battery status, and active functions (e.g., HOLD, MIN, MAX, AVG, Light Source factor).
• Дугме за укључивање (⏻): Укључује или искључује уређај.
• LX/FC/CD Button: Toggles between Lux, Footcandle, and Candela measurement units.
• MEM/READ Button: Accesses memory functions to store or recall readings.
• HOLD/L.S. Button: Activates Data Hold function or enters Light Source factor adjustment mode.
• Дугме НУЛА: Performs zero adjustment for the sensor.
• горе (▲) / Доле (▼) Дугмад: Used for navigation and adjusting values in settings modes.

5. Подешавање

5.1 Инсталација батерије

The PeakTech 5086 typically comes with batteries pre-installed. If not, or if batteries need replacement:

1. Locate the battery compartment cover on the back of the main unit.
2. Open the cover by sliding or unscrewing it (refer to the diagram in the full manual if unsure).
3. Insert the required batteries (usually AAA or 9V, check the compartment for markings) ensuring correct polarity (+/-).
4. Добро затворите поклопац одељка за батерије.

5.2 Повезивање сензора

The external sensor is permanently attached via a coiled cable. Ensure the cable is not damaged or excessively stretched. The sensor head should be clean and the protective cap removed before taking measurements.

6. Упутство за употребу

6.1 Укључивање/искључивање

• Притисните дугме за напајање (⏻) to turn the device on. The display will illuminate and show a reading.
• Притисните и држите дугме за напајање (⏻) for a few seconds to turn the device off.

6.2 Unit Selection (Lux/FC/Cd)

• Притисните тастер ЛКС/ФЦ/ЦД button to cycle through the available measurement units: Lux (lx), Footcandle (FC), and Candela (cd). The selected unit will be displayed on the LCD.

6.3 Подешавање нуле

• Before taking measurements, especially in low light conditions, it is recommended to perform a zero adjustment.
• Place the protective cap over the sensor to block all light.
• Притисните тастер ЗЕРО button. The display should show "0" or a very small value.
• Remove the protective cap before measuring.

6.4 Setting Light Source Factors (L.S.)

The PeakTech 5086 allows for compensation of different light sources. There are 10 adjustable factors (L.S. 0 to L.S. 9).

1. Притисните и држите HOLD/L.S. button until "L.S." appears on the display, indicating you are in Light Source factor adjustment mode.
2. Користите горе (▲) и доле (▼) buttons to select one of the 10 factor memory locations (L.S. 0 to L.S. 9).
3. Притисните HOLD/L.S. again to enter the adjustment for the selected factor.
4. Користите горе (▲) и доле (▼) buttons to adjust the factor value. Consult the full manual or light source specifications for appropriate values.
5. Притисните HOLD/L.S. to confirm the setting and exit the adjustment mode.

6.5 Функција задржавања података

• Током мерења, притисните HOLD/L.S. button (short press) to freeze the current reading on the display. "HOLD" will appear.
• Притисните HOLD/L.S. again to release the hold and resume live measurements.

6.6 Minimum, Maximum, and Average (AVG) Measurement

This function allows you to track the lowest, highest, and average light intensity over a measurement period.

1. Притисните тастер МЕМ/РЕАД button (short press) repeatedly to cycle through MIN, MAX, and AVG modes. The corresponding indicator will appear on the display.
2. In MIN mode, the display shows the lowest reading recorded since entering the mode.
3. In MAX mode, the display shows the highest reading recorded.
4. In AVG mode, the display shows the average reading.
5. To exit MIN/MAX/AVG mode, press the МЕМ/РЕАД button until no indicator is shown, or turn the device off and on again.

6.7 Memory Functions (Store/Recall)

The device can store up to 99 measurement values.

Storing a Measurement:

1. With a live reading on the display, press and hold the МЕМ/РЕАД button until "MEM" flashes and a memory location number appears.
2. Користите горе (▲) и доле (▼) buttons to select an empty memory location (or overwrite an existing one).
3. Притисните МЕМ/РЕАД again to store the value. The display will briefly confirm storage.

Recalling Stored Measurements:

1. Притисните тастер МЕМ/РЕАД button (short press) repeatedly until "READ" appears on the display.
2. Користите горе (▲) и доле (▼) buttons to scroll through the stored memory locations.
3. To exit recall mode, press МЕМ/РЕАД until "READ" disappears, or turn the device off and on.

7. Одржавање

7.1 Чишћење

• Wipe the device and sensor with a soft, dry cloth.
• Немојте користити абразивна средства за чишћење или раствараче.
• Keep the sensor's light-receiving surface clean and free of dust or fingerprints for accurate readings.

7.2 Замена батерије

When the low battery indicator appears on the display, replace the batteries as described in Section 5.1. Always use fresh batteries of the specified type.

7.3 Складиштење

• When not in use, store the device in its carrying bag with the sensor cap in place.
• Чувати на хладном и сувом месту, далеко од директне сунчеве светлости и екстремних температура.
• Remove batteries if storing for an extended period to prevent leakage.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

PeakTech products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official PeakTech webсајту.

Information regarding spare parts availability and software updates is not explicitly provided in the product details. For technical support or service inquiries, please contact your local PeakTech distributor or customer service department.