AXA Riff LED Bicycle Taillight User Manual

1. Увод

Thank you for choosing the AXA Riff LED Bicycle Taillight. This manual provides essential information for the safe and efficient use of your new taillight. The AXA Riff is designed with advanced light guide technology to enhance visibility and safety during cycling.

Молимо вас да пажљиво прочитате ово упутство пре инсталације и употребе и сачувате га за будуће потребе.

2. Садржај пакета

Пакет треба да садржи следеће ставке:

• 1 x AXA Riff LED Bicycle Taillight

Ако било који предмет недостаје или је оштећен, обратите се продавцу.

3. Безбедносне информације

Always prioritize safety when cycling. This taillight is designed to increase your visibility to others, but it does not replace safe cycling practices.

• Ensure the taillight is securely mounted before each ride.
• Regularly check the battery level to ensure continuous operation.
• Не гледајте директно у ЛЕД светло када је упаљено, јер то може проузроковати привремено оштећење вида.
• Чувати ван домашаја деце.
• Батерије одложите у складу са локалним прописима.

4. Подешавање и инсталација

The AXA Riff LED Taillight is designed for saddle mounting. Follow these steps for proper installation:

1. Unpack the Taillight: Carefully remove the taillight from its packaging.
2. Инсталација батерије: The product includes batteries. For future replacement, locate the battery compartment, typically on the rear or side of the unit. Insert the required batteries, ensuring correct polarity (+/-).
3. Mounting to Saddle: Attach the taillight to the rear of your bicycle's saddle or seat post using the provided mounting bracket. Ensure the bracket is tightened securely to prevent movement during rides.
4. Позиционирање: Adjust the angle of the taillight so it is clearly visible to traffic approaching from the rear. It should be positioned horizontally and facing directly backward.

Figure 1: The AXA Riff LED Bicycle Taillight, typically mounted on a bicycle's seat post or saddle.

5. Упутство за употребу

The AXA Riff LED Taillight features simple operation:

1. Укључивање/искључивање: Locate the power switch on the taillight. Slide the switch to the "ON" position to activate the light. Slide it to the "OFF" position to turn it off.
2. Светлосни режими: The taillight has 2 settings. These typically include a steady mode and a flashing mode. Cycle through the modes by pressing the power button or a dedicated mode button (if present, otherwise assume the main switch controls modes).
3. Трајање батерије: The taillight provides approximately 100 hours of battery life, depending on the selected mode and battery type.

Always ensure the light is functioning correctly before starting your ride, especially in low-light conditions.

6. Одржавање

To ensure the longevity and optimal performance of your AXA Riff LED Taillight, follow these maintenance guidelines:

• Чишћење: Wipe the light housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic material.
• Замена батерије: When the light dims or stops functioning, replace the batteries. Open the battery compartment, remove old batteries, and insert new ones, observing correct polarity.
• Отпорност на воду: The taillight is water-resistant (IPX6 rated), meaning it can withstand strong jets of water. However, it is not designed for submersion. Ensure the battery compartment cover is securely closed to maintain water resistance.
• Складиштење: If storing the taillight for an extended period, remove the batteries to prevent leakage and potential damage.
• инспекција: Periodically check the mounting bracket for tightness and ensure the light is free from cracks or damage.

КСНУМКС. Решавање проблема

8. Спецификације

9. Гаранција и подршка

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official AXA webсајт. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.

For further assistance, you may contact AXA customer service through their official channels.