Johnson Controls M9104-AGA-2S Electric Non-Spring-Return Actuator User Manual

Производ је завршенview

The Johnson Controls M9104-AGA-2S Series Electric Non-Spring-Return Actuator is designed for precise control in various HVAC applications. This direct-mount actuator operates on AC 24 V power and provides floating control. It is suitable for installation on VAV boxes, Variable Volume and Temperature (VVT) two-position zone applications, or small- to medium-sized dampерс

Кључне карактеристике укључују:

• Direct Shaft Mounting with Single-Screw Coupler: Simplifies installation and ensures secure gripping.
• 100,000 Cycle Rating: Ensures long-term reliability and service life.
• Synchronous Drive: Provides consistent rotation time regardless of load.
• 35 dB Nominal Audible Noise Rating: Suitable for environments requiring low noise levels.
• Short Travel Time: Offers quick response for two-position zone applications.

Визуелни прикази производа

Слика 1: Предња страна view of a Johnson Controls Electric Non-Spring-Return Actuator. The image displays the blue casing, model number M9102-AGA-2S (representative of the series), torque rating (2Nm), IP42 rating, CE mark, ULus listing, and the wiring diagram for AC 24V power with Black, Red, and Orange terminals.

Подешавање и инсталација

The M9104-AGA-2S actuator is designed for direct mounting. Ensure the power supply is disconnected before beginning installation.

1. Shaft Preparation: The actuator can be mounted on a round shaft up to 1/2 inch (13 mm) in diameter or a 3/8 inch (10 mm) square shaft. Ensure the shaft is clean and free of burrs.
2. Монтажа: Position the actuator on the damper or VAV box shaft. Utilize the single-screw coupler for secure attachment, ensuring three-point shaft gripping.
3. Ожичење: Connect the actuator to an AC 24 V power source. Refer to the wiring diagram on the actuator label for correct terminal connections (Black, Red, Orange). The -2S models are equipped with plenum cables.
4. Функционална провера: After installation and wiring, apply power and verify proper operation, ensuring the actuator moves freely through its full range of motion.

Упутство за употребу

The M9104 Series Actuator provides floating control. It operates by receiving control signals to drive the damper or valve to the desired position.

• Напајање: The actuator requires an AC 24 V power supply at 50/60 Hz.
• Тип контроле: This model supports floating control (AGA).
• Обртни момент: The M9104 Series provides a running torque of 35 lb·in (4 N·m).
• Nominal Travel Time (90°): 60 seconds at 60 Hz (72 seconds at 50 Hz).
• Ручно замена: If equipped, refer to the specific product markings for any manual override procedures.

Одржавање

The Johnson Controls M9104-AGA-2S actuator is designed for long-term, maintenance-free operation. However, periodic inspection is recommended to ensure optimal performance.

• Визуелни преглед: Annually inspect the actuator for any signs of physical damage, loose connections, or excessive dust accumulation.
• Сигурност монтаже: Verify that the actuator remains securely mounted to the shaft and that all fasteners are tight.
• Интегритет ожичења: Check wiring for fraying, corrosion, or loose terminals.
• Чишћење: Ако је потребно, нежно очистите спољашњост актуатора сувом, меком крпом. Не користите абразивна средства за чишћење или раствараче.

Решавање проблема

Овај одељак пружа опште смернице за уобичајене проблеме. За сложене проблеме, контактирајте техничку подршку.

Спецификације

• Број модела: M9104-AGA-2S
• Тип контроле: Floating (AGA)
• Напајање: АЦ 24В 50/60Хз
• Обртни момент: 35 lb·in (4 N·m)
• Nominal Travel Time (90°): 60 seconds (60 Hz), 72 seconds (50 Hz)
• Audible Noise Rating: 35 дБ номинално
• Cycle Rating: 100,000 циклуса
• Компатибилност осовине: Round up to 1/2 in. (13 mm) diameter, or 3/8 in. (10 mm) square shaft
• Димензије производа: 8.2 к 4.8 к 4.5 инча
• Тежина: 3 фунти
• Произвођач: Johnson Controls Inc
• Прво доступно: 5. септембра 2013. године

Информације о гаранцији

Johnson Controls products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official warranty statement provided with your product or visit the Johnson Controls official website. Typically, products are covered against defects in materials and workmanship for a specified period from the date of purchase.

Корисничка подршка

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact Johnson Controls customer support.

• Webсајт: ввв.јохнсонцонтролс.цом
• Контакт информације: Погледајте одељак „Контактирајте нас“ на званичној webсајт за регионалне бројеве телефона и подршку путем е-поште.