1. Производ је готовview
This manual provides instructions for the RC4WD Z-E0076 1/10 Baja Designs Stealth LED Light Bar. This product is designed to provide illumination for scale models. It features a durable billet aluminum construction, a molded housing, and 18 individual LED bulbs for efficient lighting.
Image: The RC4WD Z-E0076 1/10 Baja Designs Stealth LED Light Bar, showcasinг његовим компактним дизајном и ЛЕД низом.
2. Садржај пакета
Проверите да ли су све ставке наведене у наставку присутне у пакету:
- 1x RC4WD 1/10 Baja Designs S8 LED Light Bar (120mm)
- 1x Baja Designs Decal Sheet
3. Подешавање
The RC4WD Z-E0076 LED Light Bar requires no assembly. Follow these steps for installation:
- Монтажа: Securely attach the light bar to your scale model using appropriate hardware (not included). Ensure the mounting location provides a clear path for light and does not obstruct other components.
- Прикључак за напајање: Connect the light bar's power cable to a compatible 7.4 Volt power source on your model. Ensure correct polarity to prevent damage.
- Управљање кабловима: Route the power cable away from moving parts and secure it to prevent snagging or damage during operation.
Важно: This light bar is designed for 7.4 Volts. Connecting it to a higher voltage power source may cause irreversible damage.
4. Упутство за употребу
Once properly installed and connected to a 7.4 Volt power source, the light bar will illuminate when power is supplied. Operation is typically controlled via your model's existing power system or a dedicated switch, if installed.
- Укључено: Activate the power supply to your model. The LED light bar should illuminate.
- Искључивање: Deactivate the power supply to your model. The LED light bar will turn off.
5. Одржавање
Regular maintenance ensures optimal performance and longevity of your LED light bar.
- Чишћење: Gently wipe the light bar's lens and housing with a soft, dry cloth to remove dust and debris. For stubborn dirt, use a slightly damp cloth and ensure the unit is completely dry before reconnecting power.
- инспекција: Periodically inspect the wiring for any signs of wear, fraying, or damage. Check mounting points to ensure the light bar remains securely attached.
- Складиштење: When not in use for extended periods, store the light bar in a clean, dry environment away from direct sunlight and extreme temperatures.
КСНУМКС. Решавање проблема
If you encounter issues with your LED light bar, refer to the following troubleshooting guide:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Light bar does not illuminate | Нема напајања Нетачан поларитет ожичења Damaged wiring or LEDs | Ensure power source is active Verify correct positive (+) and negative (-) connections Inspect wiring for breaks; if LEDs are damaged, replacement may be necessary |
| Светло је слабо или трепери | Недовољна волtage Лабава веза Partial LED failure | Confirm power source provides 7.4 Volts Проверите заптивеност свих прикључака If individual LEDs are failing, contact support for options |
7. Спецификације
| Бранд | РЦ4ВД |
| Број модела | З-Е0076 |
| Тип извора светлости | ЛЕД |
| Волtage | 7.4 Волтс |
| Ауто Парт Поситион | Центар |
| Димензије артикла (Д к Ш к В) | 6.13 к 1 к 3 инча |
| УПЦ | 812115027694 |
| Унит Цоунт | 1 Цоунт |
| Обавезна монтажа | бр |
| Произвођач | HRP Distribution |
8. Гаранција и подршка
This product is sold without a manufacturer's warranty. Please refer to the retailer's return policy for any issues upon receipt.
For additional product information or support, please visit the official RC4WD store: RC4WD Store