EKO Mirage Sensor Bin 30L Stainless Steel (Model: EK9278MT-30L) Instruction Manual

1. Увод

Thank you for choosing the EKO Mirage Sensor Bin. This 30-liter stainless steel waste bin features an advanced sensor mechanism for hands-free operation, promoting hygiene and convenience in your home or office. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

EKO Mirage Sensor Bin in a modern kitchen setting

Image: The EKO Mirage Sensor Bin, 30L, positioned in a contemporary kitchen environment, showcasinг његов елегантан дизајн од нерђајућег челика.

2. Безбедносне информације

Молимо вас да се придржавате следећих мера безбедности како бисте спречили повреде или оштећење производа:

Do not immerse the lid or sensor mechanism in water or any other liquid. This can damage electronic components.
Use only the specified battery type (AA batteries). Ensure correct polarity when installing batteries.
Keep the sensor area clear of obstructions to ensure proper operation.
Do not force the lid open or closed manually when the sensor is active, as this may damage the motor.
Овај производ је намењен само за унутрашњу употребу.
Keep out of reach of children to prevent accidental injury or misuse.

3. Подешавање

3.1. Садржај пакета

Проверите да ли су све компоненте присутне у пакету:

EKO Mirage Sensor Bin Body (Stainless Steel)
Sensor Lid Assembly
Inner Bucket (30L)
Упутство за употребу

3.2. Инсталација батерије

The sensor lid requires batteries for operation. Locate the battery compartment on the underside of the lid.

Gently flip the lid over to access the battery compartment.
Отворите поклопац одељка за батерије.
Уметните 6 АА батерије (нису укључене) према индикаторима поларитета (+/-).
Добро затворите поклопац одељка за батерије.
Locate the power switch (ON/OFF) on the underside of the lid and switch it to the "ON" position.

Close-up of the EKO Mirage Sensor Bin lid showing the sensor area, power switch, and battery compartment

Слика: Детаљна view of the sensor bin lid, highlighting the infrared sensor, the power switch, and the open battery compartment with AA batteries inserted.

3.3. Inner Bucket and Liner Installation

Install the inner bucket and a trash liner:

Place the inner bucket into the main body of the bin. Ensure it sits flush at the bottom.
Drape a standard 30-liter trash bag over the rim of the inner bucket.
Tuck the edges of the trash bag into the designated slots or under the rim of the inner bucket to secure it.
Place the sensor lid assembly onto the main body of the bin, ensuring it is properly aligned and seated.

Close-up of the EKO Mirage Sensor Bin showing the inner bucket being placed into the main body

Image: The black inner bucket of the EKO Mirage Sensor Bin, partially inserted into the stainless steel outer body, demonstrating the liner installation step.

4. Упутство за употребу

4.1. Sensor Operation (Automatic Mode)

The sensor bin is designed for hands-free operation:

Ensure the power switch on the underside of the lid is in the "ON" position.
Approach the sensor area (located on the front of the lid) with your hand or an object within 10-15 cm (4-6 inches).
The lid will automatically open.
After 5 seconds of inactivity, the lid will automatically close.
If your hand or object remains within the sensor range, the lid will stay open.

4.2. Manual Open/Close

For extended opening or manual control:

To keep the lid open for a longer period, press the "OPEN" button on the lid. The lid will remain open until you press the "CLOSE" button.
To close the lid manually, press the "CLOSE" button.
To return to sensor mode, ensure no buttons are pressed and the power switch is "ON".

EKO Mirage Sensor Bin with its lid fully open, ready for use

Image: The EKO Mirage Sensor Bin with its lid in the fully open position, demonstrating its operational state for waste disposal.

5. Одржавање и њега

Regular cleaning and proper care will extend the life of your sensor bin:

Спољно чишћење: Обришите спољашњост од нерђајућег челика меком крпомamp cloth and a mild detergent. Dry immediately with a soft, dry cloth to prevent water spots. Do not use abrasive cleaners or scouring pads.
Чишћење поклопца: Очистите поклопац са огласомamp тканина. Do not submerge the lid in water. Ensure the sensor area is clean and free of dust or debris.
Inner Bucket Cleaning: The inner bucket can be removed and washed with soap and water. Rinse thoroughly and dry completely before placing it back into the bin.
Замена батерије: Replace all batteries when the lid's operation becomes slow or inconsistent. Always replace with new batteries of the same type.

КСНУМКС. Решавање проблема

If you encounter issues with your EKO Mirage Sensor Bin, refer to the following table:

Проблем	Могући узрок	Решење
Поклопац се не отвара аутоматски.	Прекидач за напајање је ОФФ. Батерије су истрошене или неправилно постављене. Сензор је зачепљен или прљав.	Пребаците напајање на ОН. Замените батерије новим, водећи рачуна о исправном поларитету. Очистите подручје сензора меком, сувом крпом.
Lid opens slowly or inconsistently.	Ниска снага батерије. Motor mechanism obstruction.	Замените све батерије. Check for any physical obstructions around the lid's hinge or opening path.
Поклопац се не затвара.	Object continuously in sensor range. Lid mechanism jammed.	Remove any objects from the sensor's detection area. Check for debris or damage around the lid's closing path.

7. Спецификације

Модел: EK9278MT-30L
Капацитет: 30 литара
Материјал: Stainless Steel (Body), ABS Plastic (Lid, Inner Bucket)
Снага: 6 к АА батерије (нису укључене)
Opening Mechanism: Infrared Sensor, Manual Open/Close Buttons
Тип завршетка: Мат
Тежина артикла: Отприлике 7.6 кг
Боја: Сребро

8. Гаранција и подршка

EKO products are manufactured to high-quality standards. For warranty information or technical support, please contact EKO customer service through their official webсајт или продавницу где је производ купљен.

Сачувајте доказ о куповини за гаранцијске захтеве.

EKO Official Webсајт: www.ekohome.com

EKO EK9278MT-30L