BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light User Manual

Увод

This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light. Please read this manual thoroughly before use and retain it for future reference.

Безбедносне информације

Уверите се да је напајање искључено пре инсталације или одржавања.
This LED strip is designed for 12V DC power only. Connecting to a higher voltagе ће оштетити производ.
This product is IP30 rated, meaning it is non-waterproof. Avoid exposure to water or high humidity.
Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit board or LEDs.
Ensure proper ventilation around the LED strip to prevent overheating.
Чувати ван домашаја деце.
Only use the recommended power adapter (DC12V3A) or a compatible power supply.

Садржај пакета

Проверите да ли су све компоненте присутне и у добром стању:

1 x BTF-LIGHTING 16.4ft (5m) Warm White SMD5630 LED Strip Light
1 x Remote Control (if included with your specific package)
Note: Power adapter is typically sold separately.

Спецификације

Бранд	БТФ-ЛИГХТИНГ
Број модела	56305MWW60W30
ЛЕД тип	СМД5630
ЛЕД количина	300 LEDs (60 LEDs/meter)
Дужина траке	КСНУМКС фт (КСНУМКС метара)
FPCB Board Width	10мм
Лигхт Цолор	Топла бела
Температура боје	2700К-3000К
Lumen per LED	23-25 lm/LED
Воркинг Волtage	ДЦ 12В
Препоручени адаптер за напајање	DC 12V 3A (36W) or higher
Ватtage	30 Ваттс
Водоотпорни ниво	IP30 (Non-Waterproof)
Радна температура	-20°Ц до 50°Ц
Животни век	>50,000 сати
Цертификати	ЦЕ & РоХС

Упутства за подешавање

Припремите површину: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
Слика: Крупни план view of the LED strip, highlighting individual SMD5630 LEDs and designated cut points marked with a scissor icon. The strip also shows the adhesive backing being peeled.
Мерење и сечење (опционо): If a shorter length is required, cut the LED strip only at the designated cut marks (usually indicated by a scissor icon and copper pads). Cutting elsewhere will damage the circuit and prevent the section from lighting up.
Прикључите напајање:
- Identify the 2-pin connectors on the LED strip.
- Connect the LED strip's 2-pin connector to a compatible DC 12V power adapter (not included). Ensure polarity is correct (positive to positive, negative to negative).
- If a remote control is included, connect the LED strip to the remote controller, and then connect the controller to the power adapter.
Image: Two separate sections of the LED strip, each terminating with a 2-pin connector (red and black wires), ready for connection to a power source or controller.
Test Before Adhering: Before removing the adhesive backing, plug in the power adapter to test if the LED strip lights up correctly. This allows for troubleshooting before permanent installation.
Причврстите траку: Once tested, peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired clean, dry surface. Apply firm, even pressure along the entire length to ensure good adhesion.

Упутство за употребу

Once the LED strip is properly installed and connected to a 12V DC power supply:

Укључивање/искључивање: Plug the power adapter into a wall outlet to turn the strip light on. Unplug it to turn it off.
Using the Remote Control (if applicable): If your package included a remote control, refer to its specific instructions for functions such as brightness adjustment or on/off control.

Examples of warm white LED strip lighting in various indoor settings

Слика: Визуелни ексamples of LED strip lighting used in different indoor environments, demonstrating the warm white illumination. This image also shows Cool White and Nature White, but this product is Warm White.

Одржавање

Чишћење: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
инспекција: Periodically check the strip for any signs of damage, loose connections, or adhesive degradation.
Складиштење: If storing the LED strip, ensure it is kept in a dry, cool place, away from direct sunlight and extreme temperatures.

Решавање проблема

Проблем	Могући узрок	Решење
ЛЕД трака не светли.	Нема напајања за адаптер. Incorrect power connection (polarity reversed). Неисправан адаптер за напајање. Оштећена ЛЕД трака. Remote control battery dead or not paired (if applicable).	Check wall outlet and power adapter connection. Ensure positive (+) and negative (-) connections are correct. Test with a known working 12V DC power adapter. Inspect the strip for visible damage, especially at cut points. Replace remote battery or re-pair according to remote instructions.
Part of the LED strip is not lighting up.	Damage to a section of the strip. Incorrect cutting.	Inspect the unlit section for physical damage or a broken circuit. Ensure cuts were made only at designated marks. Damaged sections cannot be repaired.
LEDs are dim or flickering.	Недовољно напајање. Лабава веза.	Уверите се да адаптер за напајање обезбеђује довољну снагуtage (minimum 30W for this strip). Check all connections for secure fit.

Гаранција и подршка

BTF-LIGHTING products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING webсајту.

Please have your model number (56305MWW60W30) and purchase details ready when contacting support.

BTF-LIGHTING 56305MWW60W30