Tech 21 SansAmp Bass Fly Rig V2 Pedal Instruction Manual

1. Увод

The Tech 21 SansAmp Bass Fly Rig V2 is a versatile multi-effects pedal designed for bassists. It integrates essential bass tones and effects into a compact, all-analog unit, suitable for live performances, studio recording, and practice. This manual provides detailed instructions for setting up, operating, and maintaining your Bass Fly Rig V2.

2. Кључне карактеристике

• All-Analog SansAmp струјно коло: Provides authentic tube amp emulation with built-in speaker and cabinet simulation, ideal for direct connection to a PA system or recording interface.
• Selectable SansAmp Character Modes: Choose between Bass Driver DI and VT Bass DI voicings for diverse bass amp тоновима.
• Промена канала: Seamlessly toggle between two independent Drive and Level settings for a range of clean to saturated tones.
• Интегрисани ефекти: Includes Octave, Fuzz, Chorus, and Compression effects for comprehensive tonal shaping.
• Chromatic Tuner: Built-in tuner with signal mute for silent and accurate tuning.
• Излаз за слушалице: The 1/4-inch output can be switched to headphone mode for private practice.
• High-Impedance Input: Features a 1/4-inch 4.7megOhm input, optimized for piezos and passive instruments.
• Пад за унос: A dedicated pad for active basses to prevent input clipping.
• КСЛР излаз: Balanced XLR output with ground connect for direct connection to mixing consoles.
• 1/4-inch Low Impedance Output: Standard instrument output for connecting to amplifiers or other pedals.

3. Производ је готовview

The image below illustrates the layout of the Tech 21 SansAmp Bass Fly Rig V2, highlighting its various controls and connections.

Figure 1: Tech 21 SansAmp Bass Fly Rig V2 Pedal Layout

This image displays the top panel of the Bass Fly Rig V2, showing the arrangement of its controls. On the far left, the XLR OUT is visible. The pedal features four main sections: CHORUS/TUNER, OCTAFILTER, SANSAMP, and COMP. Each section has dedicated knobs and footswitches. The CHORUS section has CHORUS, MIX, and Q knobs. The OCTAFILTER section has a RANGE knob. The SANSAMP section includes LEVEL, HIGH, MID, LOW, CHARAC, DRIVE, and BOOST knobs, along with a TUNER display and a BITE button. The COMP section has LEVEL, TONE, and COMP knobs. There are also small buttons for XLR, Headphone, Octave Fuzz, PRE/POST, and IN PAD. The main footswitches are labeled CHORUS/TUNER, OCTAFILTER, SANSAMP ON, BOOST, and COMP ON.

3.1. Контроле и индикатори

• CHORUS/TUNER Section:
  • CHORUS Knob: Adjusts the intensity of the chorus effect.
  • Дугме МИКС: Controls the blend of the wet (effected) and dry (unaffected) signals for the chorus.
  • Q Knob: Shapes the frequency response of the chorus effect.
  • CHORUS/TUNER Footswitch: Toggles the chorus effect on/off. Hold to activate the chromatic tuner.
• OCTAFILTER Section:
  • Дугме за подешавање опсега: Adjusts the frequency range of the Octafilter.
  • OCTAFILTER Footswitch: Engages or disengages the Octafilter effect.
  • OCTAVE FUZZ Button: Activates the octave fuzz effect.
• САНСAMP Одељак:
  • Дугме ЛЕВЕЛ: Controls the overall output level of the SansAmp одељак.
  • HIGH Knob: Adjusts the high-frequency equalization.
  • MID дугме: Adjusts the mid-frequency equalization.
  • LOW Knob: Adjusts the low-frequency equalization.
  • CHARAC Knob: Selects between Bass Driver DI and VT Bass DI character modes.
  • Дугме за погон: Controls the amount of gain and overdrive.
  • Дугме БООСТ: Sets the level of the independent boost function.
  • TUNER Display: LED display for the chromatic tuner.
  • BITE Button: Engages a high-end boost for added presence.
  • САНСAMP Ножни прекидач УКЉУЧЕНО: Activates or bypasses the SansAmp одељак.
  • PRE/POST Button: Determines if the boost is applied before or after the SansAmp одељак.
• COMP Section:
  • Дугме ЛЕВЕЛ: Controls the output level of the compressor.
  • ТОНЕ дугме: Adjusts the tonal character of the compressed signal.
  • ЦОМП дугме: Sets the amount of compression.
  • COMP ON Footswitch: Toggles the compressor effect on/off.
  • IN PAD Button: Engages an input pad for active basses to prevent signal overload.
• Улази/Излази:
  • КСЛР ИЗЛАЗ: Балансирани XLR излаз за директно повезивање са миксерском конзолом или аудио интерфејсом.
  • XLR Button: Activates the XLR output.
  • Headphone Button: Switches the 1/4-inch output to headphone mode.
  • 1/4-inch Input: Инструмент улаз.
  • 1/4-inch Output: Standard instrument output.

4. Подешавање

1. Прикључак за напајање: Connect the included 9V DC power adapter to the power input jack on the Bass Fly Rig V2. Plug the adapter into a suitable power outlet. Ensure the power supply is stable and provides the correct voltagе и amperage (9V DC, 100mA minimum).
2. Прикључак инструмента: Connect your bass guitar to the 1/4-inch input jack on the pedal using a standard instrument cable. If you are using an active bass with high output, press the IN PAD button to engage the input pad and prevent signal clipping.
3. Излазна веза:
   • To an Ampдизалица: Connect the 1/4-inch output jack of the Bass Fly Rig V2 to the input of your bass ampлифиер помоћу кабла за инструменте.
   • To a PA System or Audio Interface (DI): Connect the XLR OUT to a mixing console or audio interface using an XLR cable. Ensure the КСЛР button is engaged. This provides a balanced, direct signal with SansAmp емулација.
   • Употреба слушалица: To use headphones for silent practice, connect your headphones to the 1/4-inch output jack and press the Слушалице button. This will reconfigure the output for headphone use.
4. Почетна подешавања: Before powering on, set all effect knobs to their minimum positions and the SansAmp LEVEL knob to a low setting to avoid sudden loud sounds.

5. Операција

5.1. Опште операције

Када се повежете, укључите свој amplifier or audio system. The Bass Fly Rig V2 is always active when powered, but individual sections can be engaged or disengaged using their respective footswitches.

5.2. SansAmp Секција

The SansAmp section is the core of the pedal, providing analog tube amp emulation. Press the САНСAMP ON footswitch to activate it. Use the НИВО, ХИГХ, МИД, и ЛОВ knobs to shape your tone. The ДРИВЕ knob controls the amount of gain and distortion. The CHARAC knob allows you to switch between different amp voicings (e.g., Bass Driver DI and VT Bass DI), offering a wide range of classic and modern bass tones. The БИТЕ button adds a high-end presence boost.

5.3. Функција појачања

The Bass Fly Rig V2 features an independent boost function. Use the БООСТ knob in the SansAmp section to set the desired boost level. Press the БООСТ footswitch to engage it. The ПРЕ/ПОСТ button determines whether the boost is applied before or after the SansAmp section, affecting how it interacts with the SansAmp's gain structure.

5.4. Chorus Section

Engage the chorus effect by pressing the CHORUS/TUNER footswitch. Adjust the ЦХОРУС knob for effect depth, МИКС for wet/dry blend, and Q for tonal shaping of the chorus.

5.5. Octafilter Section

Activate the Octafilter by pressing the OCTAFILTER footswitch. The АСОРТИМАН knob controls the frequency range of the filter. For an added effect, press the ОЦТАВЕ ФУЗЗ button to combine the Octafilter with a fuzz effect.

5.6. Compressor Section

Engage the compressor by pressing the ЦОМП ОН footswitch. Use the ЦОМП knob to set the compression amount, НИВО to adjust the output volume, and ТОНЕ to fine-tune the compressed signal's character.

5.7. Chromatic Tuner

To activate the chromatic tuner, hold down the CHORUS/TUNER footswitch for a few seconds. The signal will be muted, and the ТЈУНЕР display will show your note. Tune your instrument until the display indicates the note is in tune. Press the footswitch again to exit tuner mode and unmute the signal.

6. Одржавање

• Чишћење: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
• Складиштење: When not in use, store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect the power supply.
• Напајање: Handle the power adapter with care. Avoid bending or crimping the cable, especially near the connectors, as this can lead to damage. Always use the original or a compatible power supply (9V DC, 100mA minimum, center negative).
• Footswitches and Knobs: While durable, avoid excessive force when operating footswitches and turning knobs to prevent mechanical damage.

КСНУМКС. Решавање проблема

8. Спецификације

9. Гаранција и подршка

Tech 21 products are manufactured to high standards and typically come with a limited warranty covering defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Tech 21 webсајту.

Should you encounter any issues or require technical assistance, please contact Tech 21 customer support. They are known for providing excellent service and can help with troubleshooting or repair inquiries.

Tech 21 Official Webсајт: ввв.тецх21ниц.цом