Seiko Clocks QHL068K

Seiko QHL068K LCD Dual Alarm Calendar Clock User Manual

Model: QHL068K

1. Увод

Хвала вам на куповиниasing the Seiko QHL068K LCD Dual Alarm Calendar Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new clock. Please read this manual thoroughly before use and retain it for future reference.

Садржај пакета:

  • Seiko QHL068K LCD Dual Alarm Calendar Clock
  • Кориснички приручник (овај документ)

2. Безбедносне информације

  • Не излажите сат екстремним температурама, директној сунчевој светлости или високој влажности.
  • Избегавајте испуштање сата или његово излагање јаким ударцима.
  • Не покушавајте сами да растављате или поправљате сат. Сва сервисирања препустите квалификованом особљу.
  • Истрошене батерије одложите у складу са локалним прописима.
  • Држите батерије ван домашаја деце.

3. Производ је готовview

Familiarize yourself with the components of your Seiko QHL068K clock.

Seiko QHL068K LCD Dual Alarm Calendar Clock front view

Слика 1: Фронт view of the Seiko QHL068K LCD Dual Alarm Calendar Clock, showing the digital display and control buttons.

Карактеристике екрана:

  • Приказ времена: Hours, minutes, and seconds.
  • Приказ датума: Month, day, and year.
  • Day of Week Display: Означава текући дан.
  • Индикатори аларма: Separate icons for Alarm 1 and Alarm 2.
  • Приказ температуре: Приказује температуру околине.

Control Buttons (Typical Layout - refer to your clock for exact positions):

  • MODE/SET Button: Used to switch between display modes and enter setting mode.
  • ADJUST/UP Button: Used to increase values during setting or adjust settings.
  • Дугме ДОЛЕ: Used to decrease values during setting or adjust settings.
  • ALARM ON/OFF Button: Activates or deactivates alarms.
  • SNOOZE/LIGHT Button: Activates snooze function when alarm sounds, or illuminates the display.
  • Ресет: (Often a recessed button) Resets the clock to factory defaults.

4. Подешавање

4.1 Инсталација батерије

  1. Пронађите поклопац одељка за батерије на задњој страни сата.
  2. Померите или откопчајте поклопац да бисте га отворили.
  3. Insert 2 AA batteries (not included) according to the polarity indicators (+ and -) inside the compartment.
  4. Вратите поклопац одељка за батерије безбедно.

Напомена: Ensure batteries are inserted correctly. Incorrect insertion can damage the clock. Use new, high-quality batteries for optimal performance.

4.2 Почетно укључивање

Upon successful battery installation, the LCD display will illuminate, and the clock will typically show a default time (e.g., 12:00 AM) or a flashing time. You will then need to set the current time and date.

5. Упутство за употребу

5.1 Подешавање времена

  1. Притисните и држите МОДЕ/СЕТ дугме док цифре сати не почну да трепћу.
  2. Користите ADJUST/UP or ДОВН buttons to set the correct hour. Pay attention to AM/PM indicators if present.
  3. Притисните тастер МОДЕ/СЕТ button again to move to the minute digits.
  4. Користите ADJUST/UP or ДОВН дугмад да бисте подесили тачне минуте.
  5. Притисните тастер МОДЕ/СЕТ button to confirm and exit time setting mode.

5.2 Setting the Date and Calendar

  1. Са нормалног приказа времена, притисните дугме МОДЕ/СЕТ button repeatedly until the date (e.g., Month/Day/Year) is displayed.
  2. Притисните и држите МОДЕ/СЕТ button until the year digits begin to flash.
  3. Користите ADJUST/UP or ДОВН дугмад за постављање тачне године.
  4. Притисните тастер МОДЕ/СЕТ button to move to the month digits.
  5. Користите ADJUST/UP or ДОВН дугмад за подешавање тачног месеца.
  6. Притисните тастер МОДЕ/СЕТ button to move to the day digits.
  7. Користите ADJUST/UP or ДОВН buttons to set the correct day.
  8. Притисните тастер МОДЕ/СЕТ button to confirm and exit date setting mode. The day of the week will automatically adjust.

5.3 Setting Alarm 1 and Alarm 2

Your clock features two independent alarms.

  1. Са нормалног приказа времена, притисните дугме МОДЕ/СЕТ button repeatedly until "AL1" or "AL2" is displayed, indicating the alarm time.
  2. To set Alarm 1, ensure "AL1" is displayed. Press and hold the МОДЕ/СЕТ дугме док цифре сата аларма не затрепере.
  3. Користите ADJUST/UP or ДОВН дугмад да бисте подесили жељени сат аларма.
  4. Притисните тастер МОДЕ/СЕТ button to move to the alarm minute digits.
  5. Користите ADJUST/UP or ДОВН дугмад за подешавање жељених минута аларма.
  6. Притисните тастер МОДЕ/СЕТ дугме да бисте потврдили време аларма.
  7. To activate Alarm 1, press the АЛАРМ УКЉУЧЕН / ИСКЉУЧЕН button until the Alarm 1 indicator (e.g., a bell icon) appears on the display. Repeat for Alarm 2.
  8. Да бисте деактивирали аларм, притисните дугме АЛАРМ УКЉУЧЕН / ИСКЉУЧЕН button until its indicator disappears.

5.4 Коришћење функције одлагања

Када се огласи аларм, притисните дугме СНООЗЕ / СВЕТЛО button. The alarm will temporarily stop and sound again after approximately 5-10 minutes (duration may vary by model). To turn off the alarm completely, press any other button except СНООЗЕ / СВЕТЛО, or let it ring until it automatically stops.

5.5 Using the Light Function

Притисните тастер СНООЗЕ / СВЕТЛО button to illuminate the display for a few seconds, allowing you to view the time in low-light conditions.

5.6 Приказ температуре

The clock continuously displays the ambient temperature. Some models may allow switching between Celsius (°C) and Fahrenheit (°F). If available, this option is usually accessed by a dedicated button or by pressing the ДОВН button during normal time display.

6. Одржавање

6.1 Чишћење

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casinг или приказ.

6.2 Замена батерије

When the display dims or the clock functions become erratic, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. Always replace all batteries at the same time with new ones of the same type.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Clock not turning on / Display blankБатерије су празне или су неправилно уметнуте.Проверите поларитет батерија. Замените новим АА батеријама.
Аларм се не оглашаваАларм није активиран или је погрешно подешен.Ensure alarm time is set correctly and the alarm indicator is visible on the display.
Нетачно време/датумTime/date was not set correctly or reset due to battery change.Follow instructions in Section 5.1 and 5.2 to reset time and date.
Екран је пригушенНиска снага батерије.Замените батерије новим.

8. Спецификације

ФеатуреДетаљ
Број моделаQHL068K
БрандSeiko Clocks
Дисплаи ТипеДигитални ЛЦД
Извор напајања2 к АА батерије (нису укључене)
Посебне карактеристикеDual Alarm, Snooze, Light, Calendar Display, Temperature Display
МатеријалПластика
Димензије (Ш к В)3.15" Ш x 4.72" В (приближно 8 цм x 12 цм)
Тежина0.57 фунте (приближно 258 г)

9. Гаранција и подршка

For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Seiko Clocks webсајт. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.

Seiko Clocks Official Webсајт: www.seikoclocks.com

© 2024 Seiko Corporation. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.