Fluance RT80 Classic High Fidelity Vinyl Turntable

Увод

Welcome to the user manual for your new Fluance RT80 Classic High Fidelity Vinyl Turntable. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your turntable to ensure optimal performance and longevity. Please read this manual thoroughly before using your turntable.

Шта је укључено

Your Fluance RT80 turntable package includes the following components:

• RT80 Turntable Plinth
• Дуст Цовер
• 2к шарке поклопца за прашину
• Headshell with Audio Technica AT91 Cartridge
• Противтежа
• Алуминиум Платтер
• Руббер Белт
• 45 Адаптер
• Felt Slip Mat
• 3ft RCA Cable With Ground Wire
• 5ft 100V - 240V (50/60Hz) AC Power Adapter
• Водич за брзи почетак

Image: All components included in the Fluance RT80 turntable package, laid out for easy identification.

Важне информације о безбедности

Please read and follow all safety instructions carefully to prevent damage to the unit and ensure your safety.

• Не излажите јединицу киши или влази.
• Не постављајте предмете напуњене течношћу, као што су вазе, на јединицу.
• Не блокирајте вентилационе отворе.
• Не постављајте у близини извора топлоте као што су радијатори, грејни регистри, пећи или други уређаји (укључујући ampлифиерс) који производе топлоту.
• Заштитите кабл за напајање од гажења или прикљештења.
• Користите само додатке/прибор које је навео произвођач.
• Искључите овај апарат из струје током олуја са грмљавином или када га не користите дуже време.
• Све сервисирање препустите квалификованом сервисном особљу.

Водич за подешавање

Follow these steps to properly set up your Fluance RT80 turntable.

1. Распакивање и постављање

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.

Image: The Fluance RT80 turntable in its assembled state, ready for use.

2. Постављање плоче и каиша

1. Place the aluminum platter onto the center spindle.
2. Locate the rubber drive belt. Carefully stretch the belt around the inner rim of the platter and hook it onto the motor pulley. Ensure the belt is not twisted.
3. Поставите филцану подлогу на врх тањира.

3. Counterweight and Tonearm Balance

The Audio Technica AT91 cartridge is pre-installed on the headshell. You will need to balance the tonearm.

1. Gently slide the counterweight onto the rear of the tonearm with the numbers facing forward.
2. Remove the stylus protector from the cartridge.
3. While holding the tonearm lift, carefully release the tonearm clamp.
4. Подесите противтег окретањем док ручица не буде савршено уравнотежена и не почне да лебди хоризонтално.
5. Once balanced, hold the counterweight steady and rotate the numbered ring to '0' (zero).
6. Rotate the entire counterweight counter-clockwise to the recommended tracking force of 2.0 grams (2 on the scale).

Слика: Детаљна view of the Audio Technica AT91 cartridge, highlighting its position on the tonearm.

4. Anti-Skate Adjustment

Set the anti-skate dial to the same value as your tracking force, which is 2.0 for the AT91 cartridge.

5. Уградња поклопца за прашину

Insert the two dust cover hinges into the slots at the rear of the turntable plinth, then attach the dust cover to the hinges.

Image: The Fluance RT80 turntable with its protective dust cover in the open position.

6. Везе

Connect the RCA cables from the turntable to your amplifier or powered speakers. Ensure the ground wire is connected to the ground terminal on your ampспасилац ако је доступан.

Connect the power adapter to the DC 12V input on the turntable and then plug it into a wall outlet.

Image: The rear connection panel of the turntable, illustrating the RCA outputs, ground terminal, and power input.

Image: The back of the turntable, displaying the various connection ports and switches.

7. Преamp Свитцх

The RT80 has a built-in Texas Instruments preamp. Use the switch on the rear panel to select between PHONO (BYPASS) if connecting to an amplifier with a dedicated phono input, or LINE if connecting to a standard auxiliary input on an ampлифиер или активни звучници.

Упутство за употребу

Репродукција плоче

1. Place a record on the felt slip mat.
2. Select the appropriate speed (33 1/3 RPM or 45 RPM) using the speed selector knob. Use the 45 adapter for 7-inch singles if needed.
3. Подигните ручицу грамофона помоћу полуге за подешавање звука.
4. Поставите ручицу грамофона преко жељеног почетног жлеба плоче.
5. Gently lower the cueing lever to allow the stylus to descend onto the record.
6. At the end of the record, the auto-stop feature will engage, and the platter will stop spinning.
7. Lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the tonearm clamp.

Функција аутоматског заустављања

The RT80 features an auto-stop function that automatically stops the platter rotation when the tonearm reaches the end of a record. This helps prevent unnecessary wear on the stylus and record. The auto-stop function can be toggled ON/OFF via a switch on the rear panel.

Рецорд Царе

• Always handle records by their edges to avoid transferring oils from your skin.
• Плоче чувајте вертикално у њиховим омотима како бисте спречили савијање.
• Clean records regularly with a carbon fiber brush or a record cleaning solution to remove dust and static.

Одржавање

Чишћење грамофона

• Wipe the dust cover and plinth with a soft, dry, lint-free cloth.
• Не користите јаке хемикалије или абразивна средства за чишћење.
• For the platter and tonearm, use a slightly damp крпом ако је потребно, а затим одмах осушите.

Стилус Царе

• Clean the stylus regularly using a soft brush designed for stylus cleaning, brushing from back to front.
• A dirty stylus can damage your records and degrade sound quality.
• Replace the stylus after approximately 300-500 hours of playback, or if you notice a decrease in sound quality or increased distortion.

Замена појаса

The rubber drive belt may stretch or degrade over time. If you notice inconsistent speed or a decrease in playback quality, the belt may need to be replaced. Contact Fluance support for replacement belts.

Решавање проблема

Спецификације

Гаранција и подршка

Your Fluance RT80 turntable comes with a 2 година гаранције произвођача, ensuring peace of mind regarding your purchase. Fluance also offers Доживотна корисничка подршка.

For technical assistance, warranty claims, or general inquiries, please visit the official Fluance website or contact their customer support directly. You can also refer to the Упутство за употребу (ПДФ) or Упутство за инсталацију (PDF) provided by Fluance for additional information.