Universal Office Chair Assembly Manual

1. Важне информације о безбедности

Пажљиво прочитајте сва упутства пре склапања и употребе. Сачувајте ово упутство за будуће потребе.

• Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Немојте превише затезати завртње током монтаже, јер то може оштетити компоненте.
• Држите децу и кућне љубимце даље од места монтаже. Мали делови могу представљати опасност од гушења.
• Only use the chair for its intended purpose.
• Немојте стајати на столици.

2. Садржај пакета

Verify that all components listed below are included in your package.

3. Упутство за монтажу

Follow these steps carefully to assemble your office chair.

1. Причврстите точкове на звездичасту базу: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Уметните гасни лифт: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Причврстите плочу механизма на седиште: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Причврстите наслоне за руке на седиште: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Повежите склоп седишта са гасом за подизање: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Упутство за употребу

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Подешавање висине: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Tilt Lock/Unlock: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Напон нагиба: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Одржавање

Regular maintenance will prolong the life of your office chair.

• Чишћење: Обришите површине меком, дamp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Провера причвршћивача: Периодично проверавајте све завртње и вијке да бисте били сигурни да су затегнути. По потреби их поново затегните.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• подмазивање: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

КСНУМКС. Решавање проблема

Погледајте овај одељак за решења уобичајених проблема.

7. Спецификације

Key technical details of your office chair.