INSIZE 2871-101 Electronic Thickness Gage

1. Производ је готовview

The INSIZE 2871-101 Electronic Thickness Gage is a precision measuring instrument designed for accurately determining the thickness of various materials. It features a digital display for clear readings and user-friendly controls for efficient operation.

Кључне карактеристике:

• Ceramic spindle tip and anvil for durability and precision.
• Intuitive buttons for On/Off, Zero, and Inch/Millimeter unit conversion.
• Powered by a CR2032 battery with automatic power-off function to conserve energy.
• Data output capability for advanced applications.

2. Подешавање

Before using your INSIZE Electronic Thickness Gage, please follow these setup instructions:

2.1. Инсталација батерије

The gage requires one CR2032 button cell battery. Ensure proper polarity when inserting.

1. Locate the battery compartment cover, typically on the back or side of the display unit.
2. Use a small coin or screwdriver to gently open the battery compartment.
3. Уметните батерију CR2032 са позитивном (+) страном окренутом нагоре.
4. Добро затворите поклопац одељка за батерије.

Figure 1: The INSIZE 2871-101 Electronic Thickness Gage shown in its protective case, with the CR2032 battery ready for installation. This image illustrates the product's packaging and initial setup components.

2.2. Почетно укључивање и нулирање

After battery installation, power on the device and perform an initial zeroing.

1. Притисните тастер ОН/ОФФ button to turn on the gage. The display should light up.
2. Ensure the spindle tip and anvil are clean and free of debris.
3. Gently close the spindle tip onto the anvil until they make contact.
4. Притисните тастер ЗЕРО button. The display should now read 0.0000 or 0.000. If it does not, repeat the process.

3. Упутство за употребу

Follow these steps to take accurate measurements with your thickness gage:

3.1. Мерење

1. Ensure the gage is powered on and zeroed as described in Section 2.2.
2. Gently lift the spindle lever to open the measuring jaws.
3. Carefully insert the material to be measured between the ceramic spindle tip and the anvil.
4. Release the spindle lever slowly, allowing the tip to rest firmly on the material without applying excessive force.
5. Read the thickness value displayed on the digital screen.

Figure 2: The INSIZE 2871-101 Electronic Thickness Gage in operation, highlighting its digital display and ergonomic design for precise measurements.

3.2. Промена мерних јединица

The gage can display measurements in both inches and millimeters.

• Притисните тастер ИН/ММ button to toggle between inch (in) and millimeter (mm) units. The current unit will be indicated on the display.

3.3. Искључите напајање

To turn off the gage, press and hold the ОН/ОФФ button until the display turns off. The gage also features an automatic power-off function after a period of inactivity to save battery life.

4. Одржавање

Proper maintenance ensures the longevity and accuracy of your thickness gage.

4.1. Чишћење

• Wipe the gage body with a soft, dry cloth.
• For the ceramic spindle tip and anvil, use a clean, lint-free cloth. Avoid using abrasive cleaners or solvents, as they may damage the surfaces.
• Ensure no dust or debris accumulates on the measuring surfaces.

4.2. Замена батерије

When the display becomes dim or the gage does not power on, it's time to replace the battery. Refer to Section 2.1 for battery installation instructions.

4.3. Складиштење

• Store the gage in its original protective case when not in use.
• Keep the gage in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
• Avoid storing in areas with excessive dust or corrosive chemicals.

Figure 3: The INSIZE 2871-101 Electronic Thickness Gage safely enclosed in its protective case, demonstrating proper storage for long-term preservation and protection.

КСНУМКС. Решавање проблема

If you encounter issues with your INSIZE Electronic Thickness Gage, refer to the following common problems and solutions:

6. Спецификације

Detailed technical specifications for the INSIZE 2871-101 Electronic Thickness Gage:

7. Гаранција и подршка

For warranty information and technical support, please refer to the official INSIZE webсајт или контактирајте овлашћеног продавца. Сачувајте рачун као доказ о куповини.

Произвођач: ВЕЛИЧИНА

For further assistance, visit the official INSIZE webсајту или се обратите њиховом одељењу за корисничку подршку.