Упутство за употребу електронског калибра INSIZE 1108-200

Увод

This manual provides comprehensive instructions for the safe and effective use of your INSIZE 1108-200 Electronic Caliper. This precision measuring instrument is designed for accurate dimensional measurements up to 8 inches (200mm). It features a digital display for easy reading and is constructed from durable stainless steel.

Производ је завршенview

The INSIZE 1108-200 Electronic Caliper is a versatile tool for various measurement tasks. Key components and features include:

• Дигитални екран: Provides clear and precise measurement readings.
• Measuring Jaws: Used for external and internal measurements.
• Дубинска шипка: Extends from the end of the beam for depth measurements.
• Thumb Roller: Allows for fine adjustment of the measuring jaws.
• Завртњи за закључавање: Secures the jaws in position for holding a measurement.
• Контролна дугмад:
  • УКЉУЧЕНО/ИСКЉУЧЕНО: Укључује или искључује јединицу.
  • НУЛА: Sets the display to zero at any point.
  • INCH/MM: Toggles between imperial (inches) and metric (millimeters) units.
• Аутоматско искључивање: The unit will automatically power off after a period of inactivity. Moving the digital unit will turn it back on.
• Data Output Port: For connecting an optional data output cable (7302-SPC5A, 7305-SPC2A).

Слика 1: Завршеноview of the INSIZE 1108-200 Electronic Caliper, showing its main components including the digital display, measuring jaws, and control buttons.

Сетуп

Before first use, or after replacing the battery, follow these steps:

1. Инсталација батерије:
   • Пронађите поклопац одељка за батерије на дигиталном уређају.
   • Померите или откопчајте поклопац да бисте га отворили.
   • Уметните једну CR2032 батерију са позитивном (+) страном окренутом нагоре.
   • Добро затворите поклопац одељка за батерије.
2. Укључено: Притисните тастер ОН/ОФФ button or slide the digital unit along the beam to power on the caliper.
3. Initial Zeroing:
   • Потпуно затворите мерне чељусти.
   • Притисните тастер ЗЕРО button. The display should read "0.000" or "0.00".
   • If the display does not zero, ensure the jaws are clean and fully closed, then repeat the process.

Упутство за употребу

Follow these instructions for accurate measurements:

1. Избор јединица

Притисните тастер INCH/MM button to switch between imperial (inches) and metric (millimeters) units. The selected unit will be indicated on the digital display.

2. Мерења

Always ensure the caliper jaws are clean before taking a measurement.

• External Measurement:
  • Open the large measuring jaws and place the object between them.
  • Close the jaws firmly but gently onto the object using the thumb roller.
  • Read the measurement on the digital display.
• Internal Measurement:
  • Insert the small measuring jaws into the opening of the object.
  • Open the jaws until they firmly contact the inner surfaces.
  • Read the measurement on the digital display.
• Мерење дубине:
  • Place the end of the caliper beam on the top surface of the object.
  • Extend the depth rod into the hole or recess until it touches the bottom.
  • Read the measurement on the digital display.
• Step Measurement:
  • Place the end of the fixed jaw on the higher surface of the step.
  • Extend the movable jaw until its end touches the lower surface of the step.
  • Read the measurement on the digital display.

Figure 2: A user demonstrating an external measurement using the INSIZE 1108-200 Electronic Caliper on a cylindrical metal component. The digital display shows the measured value.

3. Zeroing at Any Point (Relative Measurement)

Тхе ЗЕРО button can be used to set the display to zero at any point along the measuring range. This is useful for differential measurements or setting a reference point.

1. Position the jaws at the desired reference point.
2. Притисните тастер ЗЕРО button. The display will show "0.000" or "0.00".
3. Subsequent measurements will be relative to this new zero point.

Одржавање

Proper maintenance ensures the longevity and accuracy of your caliper.

• Чишћење:
  • Обришите чељуст чистом, сувом, меком крпом након сваке употребе.
  • Do not use solvents or harsh chemicals, as they may damage the finish or electronic components.
  • Ensure no dust or debris accumulates on the measuring surfaces or the beam.
• Складиштење:
  • Store the caliper in its supplied protective case when not in use.
  • Keep it in a dry environment, away from direct sunlight, extreme temperatures, and humidity.
  • Avoid storing the caliper with the jaws fully closed or fully open to prevent stress on the mechanism. Leave a small gap.
• Замена батерије:
  • When the display becomes dim or erratic, replace the CR2032 battery.
  • Пратите кораке за инсталацију батерије наведене у одељку „Подешавање“.
  • Одложите старе батерије у складу са локалним прописима.

Решавање проблема

If you encounter issues with your INSIZE 1108-200 Electronic Caliper, refer to the table below:

Спецификације

Detailed technical specifications for the INSIZE 1108-200 Electronic Caliper:

• Број модела: 1108-200
• Опсег мерења: 0-8 инча (0-200 мм)
• Резолуција: 0.0005 инча (0.01 мм)
• Тачност мерења: ±0.0012 инча
• Материјал: нерђајући челик
• Извор напајања: КСНУМКС к ЦРКСНУМКС батерија
• Карактеристике: Automatic power off, data output, inch/mm conversion, zero setting at any position.
• Димензије производа: Approximately 12.28" L x 4.8" W x 1.3" H
• Тежина: Отприлике 15.87 унци

Гаранција и подршка

The INSIZE 1108-200 Electronic Caliper is supplied with a Manufacturer Inspection Certificate traceable to NIST, ensuring its quality and accuracy.

For warranty information, technical support, or service inquiries, please contact INSIZE customer service or refer to the documentation provided with your purchase. Keep your purchase receipt for warranty claims.

For additional resources and product information, you may visit the official INSIZE webсајт или контактирајте свог локалног дистрибутера.