Keeley Bubble Tron Dynamic Flanger Phaser Instruction Manual

1. Производ је готовview

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter is a versatile effects pedal designed to produce unique modulation sounds. Inspired by classic dynamic flangers and phasers, this pedal offers three distinct modes of operation: Dynamic Flange, Dynamic Phase, and Random Filter. It allows for expressive control over your guitar's signal, reacting to your pick attack and playing dynamics to create a range of sonic textures.

Figure 1: Keeley Bubble Tron Dynamic Flanger Phaser Pedal.

The pedal features a simple yet powerful control layout, allowing users to dial in subtle or extreme effects. Its dynamic response makes it an intuitive tool for guitarists seeking to add expressive modulation to their sound.

2. Подешавање

To set up your Keeley Bubble Tron pedal, follow these steps:

1. Прикључак за напајање: Connect a standard 9V DC power supply (center negative, 65mA+ current draw) to the 9V jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. Улазна веза: Connect your guitar or other instrument to the "INPUT" jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. Излазна веза: Connect the "OUTPUT" jack on the left side of the pedal to your ampлифтер или следећу педалу у вашем сигналном ланцу користећи стандардни инструментални кабл од 1/4 инча.
4. Почетна подешавања: Before engaging the pedal, set all knobs to their 12 o'clock position and ensure the mode switch is in the middle (Phase) position for a neutral starting point.

3. Упутство за употребу

The Keeley Bubble Tron offers a variety of controls to shape your sound. Familiarize yourself with each knob and switch:

Контроле:

• RATE (FDBK):
  • In Filter & Phase modes: Controls the rate of the LFO.
  • In Flange mode: Controls feedback. Turning left provides maximum negative feedback; turning right provides maximum positive feedback.
• СЕНС (осетљивост):
  • In Filter mode: Controls envelope sensitivity, acting like a synth filter.
  • In Phase & Flange modes: Controls input sensitivity, determining the point at which dynamic control is triggered. Start with this knob at full left and adjust for desired responsiveness.
• DEPTH (Shape):
  • In Filter mode: Selects LFO shape (from full left: ramp горе, рamp down, random, or triangle).
  • In Phase & Flange modes: Sets the depth of the effect for mild or lush sounds.
• НИВО: Контролише укупни излазни ниво ефекта.
• НОЖНИ ПРЕКИДАЧ: Toggles the effect on and off.

Mode Select Switch:

• УП: Activates Filter mode.
• СРЕДИНА: Activates Phase mode.
• ДОЉЕ: Activates Flange mode.

Figure 2: Bank A (Default Mode) Control Layout. This mode is active when the internal switch is set to Bank A.

Internal Mini Toggles (Bank Selection):

The Bubble Tron features internal mini toggles to expand its sonic capabilities. To access these, you will need to remove the back plate of the pedal.

• ANALOG FILTER (Vintage/Modern):
  • Винtagе режим: Rolls off some high frequencies for a warmer tone.
  • Модерни режим: Provides full-range clarity (default setting).
• BANK TOGGLE (Bank 1/Bank 2):
  • Bank 1 (Default): Offers Sample & Hold Filter, Dynamic Phaser, and Dynamic Flanger modes.
  • Банка 2: Offers Envelope Filter, Standard 8-Stage Phaser, and Standard Classic Flanger modes.

Figure 3: Bank B Control Layout. Access this mode by switching the internal Bank Toggle from Bank A to Bank B.

Figure 4: Internal Mini Toggles for Analog Filter and Bank Selection.

Figure 5: External Toggle Switch modes for Bank 1 and Bank 2.

4. Одржавање

To ensure the longevity and optimal performance of your Keeley Bubble Tron, observe the following maintenance guidelines:

• Чишћење: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, as these can damage the finish.
• Складиштење: Чувајте педалу на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура. Када се не користи дуже време, искључите напајање.
• Напајање: Always use a regulated 9V DC power supply with a center-negative polarity and sufficient current (65mA+). Incorrect power supplies can cause damage and void the warranty.
• Везе: Ensure all cables are securely connected. Avoid excessive force when plugging or unplugging cables.

КСНУМКС. Решавање проблема

If you encounter issues with your Keeley Bubble Tron, try these troubleshooting steps:

• Нема звука:
  • Проверите све кабловске везе (улаз, излаз, напајање).
  • Verify the power supply is correctly connected and providing the specified 9V DC.
  • Осигурајте свој инструмент и ampЛифиер ради исправно.
  • Bypass the pedal to confirm the issue is with the pedal itself.
• Нежељена бука/брујање:
  • Use a high-quality, isolated power supply.
  • Проверите да ли има неисправних каблова.
  • Обезбедите правилно уземљење вашег ampлифиер и друга опрема.
• Effect Not Engaging/Responding:
  • Check the footswitch functionality.
  • Adjust the SENS (Sensitivity) knob, especially in dynamic modes, to ensure it's set appropriately for your playing style and instrument output.
  • Verify the MODE SELECT switch is in the desired position.

6. Спецификације

7. Гаранција и подршка

For warranty information and technical support, please refer to the official Keeley Electronics webсајт или директно контактирајте њихову корисничку службу. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.

Службено Webсајт: Keeley Electronics Store