Roca A5A3796C00

Роца НАИА МЕЗ ЛАВ АЛТО ЛИСО Висока Бasin Упутство за употребу миксера

Model: A5A3796C00

Увод

This manual provides essential information for the installation, operation, and maintenance of your Roca NAIA MEZ LAV ALTO LISO high basin mixer tap. Please read these instructions carefully before installation and retain them for future reference.

Роца НАИА МЕЗ ЛАВ АЛТО ЛИСО Висока Бasin Миксер тапните

Image 1: The Roca NAIA MEZ LAV ALTO LISO high basin mixer tap, featuring a sleek chrome finish and a single lever for water control.

Безбедносне информације

Always ensure the main water supply is turned off before beginning any installation or maintenance work. If you are unsure about any part of the installation process, consult a qualified plumber.

  • Не користите абразивна средства за чишћење или жичане сунђере на хромираној површини.
  • Уверите се да су сви спојеви водонепропусни како бисте спречили цурење.
  • Заштитите производ од ниских температура.

Подешавање и инсталација

The Roca NAIA MEZ LAV ALTO LISO tap is designed for single-hole deck mounting. Installation should be performed by a competent individual or a qualified professional.

Укључене компоненте:

  • Mixer tap unit
  • Flexible connection hoses (G 3/8" thread)
  • Mounting hardware (M8 bolt)
  • Click-clack drain

Потребни алати (нису укључени):

  • Подесиви кључ
  • Шрафцигер
  • Заптивна трака (PTFE трака)

Кораци инсталације:

  1. Припремите Бasin: Ensure the mounting hole on your basin is clean and free of debris. The tap requires a single hole for installation.
  2. Attach Flexible Hoses: Screw the flexible connection hoses into the base of the tap unit. Hand-tighten first, then use a wrench for a final snug turn, ensuring not to overtighten.
  3. Монтирајте славину: Insert the tap unit into the basin рупа. Испод бasin, secure the tap using the provided mounting hardware (washer and nut) onto the M8 bolt. Tighten securely to prevent movement.
  4. Повежите водовод: Connect the flexible hoses to your hot and cold water supply lines. The hose with the red marking typically connects to hot water, and the blue marking to cold water. Use sealant tape on the threads and tighten connections with a wrench.
  5. Install Click-Clack Drain: Follow the instructions provided with the click-clack drain for proper installation into the basin's drain hole. Ensure a watertight seal.
  6. Тест за цурење: Slowly turn on the main water supply. Check all connections for leaks. Operate the tap to ensure proper water flow and temperature mixing.
Roca NAIA MEZ LAV ALTO LISO Tap Dimensions and Installation Diagram

Image 2: Technical diagram showing the dimensions of the Roca NAIA MEZ LAV ALTO LISO tap and its installation components, including the M8 bolt and G 3/8" flexible hoses.

Упутство за употребу

The Roca NAIA MEZ LAV ALTO LISO tap features a single lever for controlling both water flow and temperature.

  • Проток воде: Lift the lever upwards to increase water flow. Push it downwards to decrease and turn off the water.
  • Контрола температуре: Move the lever to the right for cold water and to the left for hot water. The tap is designed to open in cold water when the lever is in the front position, promoting energy saving.

Note: This tap is designed to save water and energy, with a flow rate of 5 liters per minute at 3 bar pressure.

Нега и одржавање

Regular cleaning and proper maintenance will ensure the longevity and appearance of your Roca tap.

Чишћење површине:

  • Clean the chrome surface with a soft cloth and mild soap or a non-abrasive liquid cleaner specifically designed for chrome finishes.
  • Rinse thoroughly with clean water and dry immediately with a soft cloth to prevent water spots.
  • Немојте користити abrasive cleaners, scouring pads, acids, or solvents, as these can damage the chrome finish.

Чишћење аератора:

Periodically unscrew the aerator at the tip of the spout and clean any accumulated debris or limescale. Rinse it under running water and reattach it securely.

Решавање проблема

Проблем Могући узрок Решење
Низак проток воде
  • Зачепљен аератор
  • Partially closed stopcock
  • Debris in supply lines
  • Clean or replace aerator.
  • Ensure stopcocks are fully open.
  • Flush supply lines (consult a plumber if necessary).
Цурење из излива
  • Истрошен кертриџ
  • Отпадци у кертриџу
  • Replace the ceramic cartridge (consult a plumber).
  • Clean the cartridge (turn off water supply first).
Цурење из базе
  • Loose mounting nut
  • Improperly sealed connections
  • Tighten mounting nut.
  • Check and re-seal hose connections.
Без топле/хладне воде
  • Supply valve closed
  • Blocked supply line
  • Ensure hot/cold water supply valves are open.
  • Check for blockages in the specific supply line.

Техничке спецификације

  • Модел: NAIA MEZ LAV ALTO LISO
  • Број модела: A5A3796C00
  • Бренд: Роца
  • Завршна обрада: Цхроме
  • Материјал: Brass, Stainless Steel, Zinc
  • Начин инсталације: Single-hole, Deck-mounted
  • Број ручки: 1
  • Материјал ручке: Месинг
  • Handle Placement: Центар
  • Брзина протока: 5 L/min (at 3 bar)
  • Посебне карактеристике: Water and energy saving, Cold water opening in front position, Lightweight
  • Димензије производа: 9.4 к 26 к 46.6 цм (дужина к ширина к висина)
  • Тежина артикла: 2.62 килограма
  • Укључене компоненте: Click-clack drain, Flexible connection hoses

Информације о гаранцији

Specific warranty details for Roca products may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for detailed warranty terms and conditions. Generally, Roca products are covered against manufacturing defects.

Корисничка подршка

For further assistance, technical support, or to inquire about spare parts, please contact Roca customer service or visit the official Roca website. When contacting support, please have your product model number (A5A3796C00) and purchase details available.

Official Roca Webсајт: ввв.роца.цом

© 2023 Roca. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.