RAYSON TD-1500B34

Rayson TD-1500B34 Binding Machine User Manual

Model: TD-1500B34 | Brand: RAYSON

1. Увод

This manual provides detailed instructions for the safe and efficient operation of your Rayson TD-1500B34 Binding Machine. Please read this manual thoroughly before operating the machine to ensure optimal performance and longevity.

The Rayson TD-1500B34 is a robust binding machine designed for medium-sized document binding tasks. It features square holes with a 3:1 pitch, capable of punching up to 15 sheets and binding up to 130 sheets.

2. Безбедносна упутства

  • Always operate the machine on a stable, flat surface.
  • Држите руке и широку одећу даље од покретних делова током рада.
  • Do not exceed the maximum punching capacity (15 sheets of 80gsm paper or 2 sheets of 0.2mm PVC cover) to prevent damage to the machine.
  • Unplug the machine from the power outlet before cleaning or maintenance.
  • Чувати ван домашаја деце.

3. Компоненте производа

Rayson TD-1500B34 Binding Machine with labeled parts
Figure 1: Key components of the Rayson TD-1500B34 Binding Machine, including the punching plate, binding handle, binding plate, disengaging dies, wire size selector, paper margin adjustment, paper scrap drawer, and paper stopper.
  • Punching Plate: Area where paper is inserted for punching.
  • Binding Handle: Lever used to operate the punching mechanism.
  • Плоча за везивање: Area where the binding comb is placed for document insertion.
  • Disengaging Dies: Individual punch pins that can be disengaged for custom paper sizes.
  • Wire Size Selector: Dial to adjust the wire closing mechanism based on wire diameter.
  • Paper Margin Adjustment: Lever to set the distance of the punched holes from the paper edge.
  • Paper Scrap Drawer: Collects paper waste from punching.
  • Paper Stopper: Guide to ensure consistent paper alignment.

4. Подешавање

  1. Распакивање: Carefully remove the binding machine from its packaging.
  2. Инсталација ручке: Insert the punching and binding handles into their respective slots and secure them.
  3. Initial Punching: Before first use, punch several sheets of scrap paper (at least 6 times) to remove any excess oil from the punching dies. This ensures clean punches for your documents.
    4. Video 1: Initial setup and punching of the Rayson TD-1500B34, demonstrating handle installation and the process of punching scrap paper to clean the dies.

5. Упутство за употребу

5.1. Adjusting Paper Margin

The paper margin adjustment allows you to control the distance of the punched holes from the edge of your document. This is crucial for a professional finish and to ensure pages turn smoothly.

  1. Locate the paper margin adjustment knob on the side of the machine.
  2. Pull and push the colored tab to select the desired margin depth (e.g., 0.12 inch / 3mm, 0.19 inch / 5mm, 0.27 inch / 7mm).
  3. Ensure the selected margin is consistent for all pages in your document.
Video 2: Demonstration of adjusting the paper margin on the Rayson TD-1500B34, showing how to select different margin depths for varied document needs.
Diagram showing different margin settings
Figure 2: Visual representation of different margin settings (2.5mm, 3.5mm, 4.5mm) and their effect on the punched holes' distance from the paper edge.

5.2. Punching Documents

The TD-1500B34 can punch up to 15 sheets of 80gsm paper or 2 sheets of 0.2mm PVC cover at once. It supports various paper sizes including A4, Letter, A5, A6, B5, and B6.

  1. Adjust the paper stopper to the desired paper size (e.g., A4 or Letter).
  2. For custom sizes or to avoid half-punches, disengage specific dies by pulling them out. The machine has 34 holes, and individual dies can be disengaged.
  3. Insert the paper squarely into the punching slot, aligning it with the paper stopper.
  4. Press the punching handle down firmly and completely to punch the holes.
  5. Release the handle and remove the punched paper.
  6. Repeat for all pages.
Rayson TD-1500B34 showing punching capacity and paper sizes
Figure 3: The punching plate indicating maximum punching capacity (15 sheets) and compatible paper sizes (A4, Letter, A5, A6, B5, B6).
Close-up of punching mechanism and dual handle
Слика 4: Детаљно view of the punching mechanism and the dual handle design for efficient punching.
Video 3: Demonstrates the punching process for A3 size paper using the disengageable dies, highlighting the machine's versatility for larger documents.

5.3. Binding Documents

The machine can bind up to 130 sheets of 80gsm paper using 5/8-inch wire binding spines.

  1. Select the appropriate wire binding spine size based on the number of sheets to be bound. Use the wire size selector dial on the machine for guidance.
  2. Place the wire binding spine onto the binding plate, ensuring the open side of the wire faces upwards.
  3. Carefully insert the punched pages onto the open wire spine. Start with the back cover, then the main document pages, and finally the front cover.
  4. Once all pages are on the spine, remove the document from the binding plate.
  5. Insert the document (with the wire spine) into the wire closing mechanism, ensuring the spine is properly seated.
  6. Pull the binding handle to close the wire spine. Adjust the wire size selector if the closure is not perfect.
  7. Remove the bound document.
Bound document with wire binding
Figure 5: A completed document bound with a wire spine, showcasing the professional finish achievable with the machine.
Close-up of wire binding spine being closed
Слика 6: Крупни план view of the wire binding spine being closed, demonstrating the secure binding process.
Open bound notebook showing wire spine
Figure 7: An open notebook demonstrating the functionality of the wire binding, allowing pages to lay flat.

6. Одржавање

  • Чишћење: Regularly empty the paper scrap drawer located at the bottom of the machine. Use a soft, dry cloth to wipe down the exterior.
  • подмазивање: Periodically punch a few sheets of waxed paper to lubricate the punching dies and keep them sharp.
  • Складиштење: Чувајте машину у сувом окружењу без прашине када се не користи.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Incomplete or Jagged PunchesOverloading the machine; dull dies; paper not inserted squarely.Reduce the number of sheets per punch; lubricate dies with waxed paper; ensure paper is aligned correctly.
Wire Spine Not Closing ProperlyIncorrect wire size selected; wire not seated correctly in the closing mechanism; wire closing mechanism needs adjustment.Verify wire size matches document thickness; ensure wire is fully seated; adjust wire size selector dial.
Папер ЈамOverloading; misaligned paper.Do not force the handle; carefully remove jammed paper; reduce sheet count for subsequent punches.

8. Спецификације

  • Модел: ТД-1500Б34
  • Капацитет пробијања: 15 sheets (80gsm paper) / 2 sheets (0.2mm PVC cover)
  • Капацитет везивања: 130 sheets (80gsm paper) with 5/8-inch wire binding spines
  • Тип рупе: Квадратне рупе
  • Питцх: 3:1
  • Број рупа: 34
  • Подесива маргина: Yes (2.5mm, 3.5mm, 4.5mm)
  • Disengageable Dies: Да
  • Изградња: Од целог метала
  • Димензије: 18.11 к 10.24 к 13.78 инча
  • Тежина: 20 фунти
  • Боја: White+black

9. Гаранција и подршка

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official RAYSON webсајт. Сачувајте рачун као доказ о куповини за евентуалне рекламације по гаранцији.

For additional assistance, you may contact Roger's shop, the seller, through the Amazon platform.

© 2024 RAYSON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.