Aideepen TDA7492P 2x50W Dual Channel Ampлифиер Боард Усер Мануал

1. Производ је готовview

The Aideepen TDA7492P 2x50W Dual Channel Amplifier Board is designed to provide high-quality stereo audio amplification for various speaker systems. Featuring Bluetooth wireless connectivity, this board is suitable for home or vehicle audio streaming applications.

Кључне карактеристике:

• 50W+50W HIFI Board: Delivers 2x50W of power for multi-speaker setups with 8 ohms impedance.
• Upgraded Version (AD-001): Incorporates the TDA7492P chip with enhanced capacitor resistance for improved stereo sound and better heat dissipation. Features gold-plated mounting holes for durability and aesthetics.
• Блуетоотх повезивање: Compatible with most smartphones for wireless music streaming. Note: Not compatible with computers.
• Integrated Control Buttons: Includes responsive buttons for power, previous track, next track, play/pause, volume up, and volume down. A Bluetooth indicator flashes red and blue alternately when ready for pairing.
• Compact Design, Powerful Sound: Despite its small size, this amplifier can achieve 110-120 dB output with high-efficiency drivers.

Слика 1.1: Врх view of the Aideepen TDA7492P Dual Channel Ampлифиер Боард.

2. Садржај пакета

Ensure all items are present and in good condition upon opening the package.

• 1x TDA7492P Audio Receiver Ampдаска за подизање

Слика 2.1: amplifier board as received in its packaging.

3. Безбедносне информације

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Напајање: Use a DC power supply between 8V and 24V. Ensure the power supply's output current is sufficient (at least 2A recommended for optimal performance). The power connector is 5.5mm outside diameter, 2.1mm inside diameter, with positive on the inside and negative on the outside.
• Ожичење: Always distinguish between positive and negative terminals when connecting speakers. Incorrect wiring can damage the amplifier board or speakers.
• Окружење: Do not expose the device to moisture, extreme temperatures, or direct sunlight. Operate in a well-ventilated area.
• Руковање: Avoid touching the circuit board components while the device is powered on.

4. Упутства за подешавање

Follow these steps to set up your Aideepen TDA7492P ampдаска за подизање.

1. Prepare Speakers: Ensure your speakers are rated for 8 ohms impedance. Strip a small amount of insulation from the ends of your speaker wires.
2. Повежите звучнике: Loosen the screws on the green terminal blocks (speaker outputs) on the amplifier board. Carefully insert the speaker wires, ensuring the positive (+) and negative (-) wires are connected to the corresponding terminals for each channel (L+ L- for left, R+ R- for right). Tighten the screws to secure the wires.
3. Прикључите напајање: Plug a compatible DC power adapter (8-24V, at least 2A, 5.5x2.1mm barrel connector, center positive) into the power input jack on the board.
4. Укључено: After connecting the power, the Bluetooth indicator LED on the board will begin to flash, indicating it is ready for pairing.

Слика 4.1: Детаљно view of speaker and power connection points on the ampдаска за подизање.

Figure 4.2: Labeled diagram of the amplifier board showing Bluetooth antenna, indicator, buttons, and power interface.

5. Упутство за употребу

Једном amplifier board is set up, you can begin streaming audio wirelessly.

1. Блуетоотх упаривање:
   • Осигурајте amplifier board is powered on and the Bluetooth indicator is flashing (red and blue alternately).
   • На паметном телефону или другом уређају који подржава Bluetooth, идите на подешавања Bluetooth-а.
   • Тражи available devices. The amplifier board will typically appear as "SANWU Audio" or a similar identifier.
   • Изаберите amplifier board to pair. Once connected, the Bluetooth indicator LED will typically show a solid blue light or a slower flash.
2. Аудио репродукција:
   • Open your preferred music player application on your connected device.
   • Start playing audio. Sound will be routed through the amplifier board to your connected speakers.
3. Using On-Board Controls: Тхе amplifier board features several buttons for direct control:
   • ПЛАИ/ПАУСЕ: Toggles playback.
   • ПРЕВ: Прескаче на претходну нумеру.
   • СЛЕДЕЋЕ: Прелази на следећу нумеру.
   • ВОЛ+: Повећава јачину звука.
   • ВОЛ-: Смањује јачину звука.

Слика 5.1: amplifier board connected to speakers and streaming music from a smartphone via Bluetooth.

6. Одржавање

Правилно одржавање осигурава дуготрајност и оптималне перформансе вашег ampдаска за подизање.

• Чишћење: Use a soft, dry cloth to gently wipe the surface of the board. Avoid using liquid cleaners or solvents, as these can damage components.
• Складиштење: When not in use for extended periods, store the board in a cool, dry place away from direct sunlight and dust.
• Руковање: Always handle the board by its edges to avoid touching sensitive electronic components.

КСНУМКС. Решавање проблема

Ако наиђете на проблеме са својим amplifier board, refer to the following common problems and solutions:

8. Спецификације

Detailed technical specifications for the Aideepen TDA7492P Ampлифиер Боард.

9. Гаранција и подршка

The Aideepen TDA7492P Dual Channel Amplifier Board comes with a 6-month extended warranty.

For technical assistance, troubleshooting, or warranty claims, please contact Aideepen customer service. Our team is available 24/7 to provide friendly support.

Контакт информације:

• Webсајт: www.aideepen.com (Молимо вас да проверите званичну webсајт за најновије контакт податке.)
• Емаил: Погледајте паковање производа или званична упутства webсајт за подршку путем е-поште.