AIBOO YK-300000197

AIBOO Linkable Under Cabinet LED Lighting System User Manual

Модел: YK-300000197

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. Важне информације о безбедности

  • електрична безбедност: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
  • No Wall Plug: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
  • Само за унутрашњу употребу: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
  • вентилација: Ensure adequate ventilation around the LED driver to prevent overheating.
  • Компатибилност компоненти: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Садржај пакета

Проверите да ли су све ставке наведене у наставку укључене у ваш пакет:

  • LED Puck Lights (6 units)
  • RF Wireless Remote Control (1 unit)
  • LED Controller (1 unit)
  • 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
  • 5ft Extension Cords (2 units)
  • 6-Way Splitter (1 unit)
  • Mounting Stickers (12 units)
  • Монтажни вијци (12 комада)
Contents of the AIBOO Linkable Under Cabinet LED Lighting System package
Слика 3.1: Садржај пакета. This image displays all components included in the AIBOO Linkable Under Cabinet LED Lighting System: six puck lights, a remote, a controller, a 12V 1A adapter, two 5ft extension cords, a 6-way splitter, 12 stickers, and 12 screws.

4. Спецификације производа

БрандАИБОО
Број моделаИК-300000197
Лигхт Цолор6000К Даилигхт Вхите
МатеријалMetal (Puck Light Housing), Plastic (Shade)
Puck Light Dimensions6 цм x 6 цм x 0.8 цм
Извор напајањаЕлектрични са каблом (жичани)
Волtage12 Volts (DC output from driver)
Тип извора светлостиЛЕД
Осветљеност1200 лумена (укупно за 6 светала)
Посебне карактеристикеDimmable, Linkable, Remote Control
Контролни методРФ бежични даљински управљач
УПЦ712411875756
Dimensions of the AIBOO LED puck lights and associated components
Слика 4.1: Димензије производа. This image illustrates the dimensions of the puck lights (2.3 inches diameter, 0.3 inches thick), cable lengths, and controller/driver sizes for planning installation.

5. Подешавање и инсталација

Пре почетка инсталације, уверите се да је главно напајање подручја инсталације искључено помоћу прекидача.

5.1 Wiring Diagram Overview

Overall wiring diagram for the AIBOO Linkable Under Cabinet LED Lighting System
Figure 5.1: System Wiring Overview. This diagram shows the connection flow from the hardwired LED driver to the LED controller, and then to the individual puck lights.

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

  1. Искључите напајање на главном прекидачу.
  2. Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
  3. Secure all connections with appropriate wire connectors.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Серијска веза

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

Diagram showing puck lights connected in a series configuration
Figure 5.2: Series Connection. Lights are connected sequentially, one after another, from the LED controller.
  1. Connect the LED controller to the output of the hardwired LED driver.
  2. Connect the first puck light to the LED controller.
  3. Connect the subsequent puck lights to each other using their integrated cables.
  4. Use extension cords if additional length is required between lights.

5.3.2 Паралелна веза

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

Diagram showing puck lights connected in a parallel configuration using a 6-way splitter
Figure 5.3: Parallel Connection. Lights are connected to a central 6-way splitter, which then connects to the LED controller.
  1. Connect the LED controller to the output of the hardwired LED driver.
  2. Connect the 6-way splitter to the LED controller.
  3. Connect individual puck lights to the available ports on the 6-way splitter.
  4. Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

  1. Припрема површине: Уверите се да је површина за монтажу чиста, сува и глатка.
  2. Монтажа лепком: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
  3. Монтажа завртњима: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Упутство за употребу

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Функције даљинског управљача

Diagram of the AIBOO remote control with button functions
Figure 6.1: Remote Control Functions (New Version). This image details the buttons on the remote control and their corresponding actions, including ON/OFF, brightness adjustment, pairing, and timer settings.
  • УКЉУЧЕНО/ИСКЉУЧЕНО: Притисните тастер ON button to turn the lights on, and the ОФФ button to turn them off.
  • Подешавање осветљености:
    • Притисните LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
    • Користите 100%, 50%, 25% buttons for quick brightness presets.
  • Упаривање: To pair the remote with the controller, press the Пар button within 5 seconds of powering on the lights until the lights flicker.
  • Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Децоде button within 5 seconds of powering on the lights until the lights flicker.
  • Функције мерења времена: Притисните 1H, 2H, 4H, или 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.
Detailed instruction for the AIBOO remote control functions
Figure 6.2: Remote Control Detailed Instructions. This image provides a clear breakdown of each button's function on the remote, including ON/OFF, brightness adjustment, pairing, and timing settings.
Visual representation of 10 levels of adjustable brightness for AIBOO LED puck lights
Figure 6.3: Adjustable Brightness. This image demonstrates the range of 10 adjustable brightness levels, from dim to full brightness, controlled by the remote.

7. Одржавање

The AIBOO LED Lighting System requires minimal maintenance.

  • Чишћење: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • инспекција: Periodically check all connections for tightness and inspect cables for any signs of damage.
  • Замена батерије: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

КСНУМКС. Решавање проблема

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

ПроблемМогући узрокРешење
Светла се не пале.No power to the LED driver; Remote control battery is dead; Remote not paired; Loose connections.Check circuit breaker. Replace remote battery. Re-pair remote (see Section 6.1). Verify all cable connections are secure.
Lights are flickering or strobing.Too many lights connected to a single power supply; Faulty power supply.Ensure no more than 6 lights are connected to one power supply. If flickering persists, inspect the power supply for signs of damage (e.g., warped casing, discoloration). A damaged power supply may need replacement.
Даљински управљач не реагује.Remote control battery is dead; Remote is out of range; Remote is not paired with the controller.Replace the CR2 battery in the remote. Move closer to the LED controller. Re-pair the remote with the controller (see Section 6.1).
Lights do not dim or respond to brightness controls.Remote not paired correctly; Controller malfunction.Re-pair the remote (see Section 6.1). If the issue persists, contact customer support.

9. Информације о гаранцији

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webсајт. Сачувајте рачун као доказ о куповини за евентуалне рекламације по гаранцији.

10. Корисничка подршка

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

  • U.S. Live Customer Support: Понедељак - петак, 9:00 - 17:00 (EST)
  • Онлине ресурси: Посетите AIBOO Store on Amazon за додатне информације о производу и подршку.
Illustration of customer support representatives with contact icons
Слика 10.1: Корисничка подршка. This image represents the availability of customer support for assistance with product-related queries.

© 2025 AIBOO. All rights reserved.