SELVE iveo Multi Send 10-Channel Radio Hand Transmitter User Manual

1. Увод

The SELVE iveo Multi Send is a versatile 10-channel radio hand transmitter designed for convenient control of SELVE radio motors. It features an integrated timer, Astro function, holiday function, intermediate position control, and automatic summer/winter time adjustment. Its large, clear display and intuitive programming make it easy to operate and configure your automated shading systems.

2. Безбедносне информације

• Пажљиво прочитајте ово упутство пре инсталације и рада.
• Држите уређај даље од влаге и екстремних температура.
• Operate the device only in dry indoor environments.
• Не покушавајте сами да отворите или поправите уређај. За сервис се обратите квалификованом особљу.
• Important: This device is designed to function exclusively with SELVE SE Pro-RC and SEL Plus R(C) radio motors. It is not compatible with other radio motor systems.

3. Садржај пакета

• 1 x SELVE iveo Multi Send 10-Channel Radio Hand Transmitter
• 2 к ААА батерије
• 1 к зидни носач
• 1 x EVEROXX® Phase Tester (VDE/GS certified)

Image: The SELVE iveo Multi Send 10-Channel Radio Hand Transmitter, showing its display and control buttons.

Image: The included EVEROXX® Phase Tester, a VDE/GS certified electrical testing tool.

4. Производ је готовview

The iveo Multi Send features a clear LCD display and a user-friendly button layout for easy navigation and control.

• Приказ: Shows current time, channel, and operating mode (AUTO/MANUAL).
• Дугме МЕНУ: Accesses programming and settings menus.
• Дугме АУТО: Toggles between automatic (timer-controlled) and manual operation.
• Дугме ОК: Потврђује изборе и подешавања.
• Direction Buttons (Up/Down/Left/Right): Used for navigation, manual motor control, and channel selection.

5. Подешавање

5.1 Инсталација батерије

1. Open the battery compartment cover on the back of the hand transmitter.
2. Уметните две ААА батерије, водећи рачуна о исправном поларитету (+/-).
3. Добро затворите поклопац одељка за батерије.

5.2 Монтажа на зид

1. Select a suitable location for the wall mount, ensuring it is within reach and provides good signal transmission.
2. Secure the wall mount to the wall using appropriate screws (not included).
3. Slide the hand transmitter onto the wall mount until it clicks into place.

5.3 Initial Pairing with Motors

To control your SELVE radio motors, the hand transmitter must be paired with them. Multiple motors can be assigned to a single channel.

1. Ensure your SELVE radio motor is in pairing mode (refer to your motor's specific manual for instructions).
2. On the iveo Multi Send, select the desired channel for the motor.
3. Follow the on-screen prompts or specific button sequences (usually involving the MENU and OK buttons) to initiate the pairing process.
4. Once paired, you can set the upper and lower end positions for the motor using the hand transmitter.

6. Упутство за употребу

6.1 Избор канала

Користите Лево и Тачно arrow buttons to navigate between the 10 available channels. The selected channel number will be displayed on the screen.

6.2 Ручна контрола

• Притисните тастер Up arrow to move the motor upwards.
• Притисните тастер Доле arrow to move the motor downwards.
• Притисните тастер OK button to stop the motor at any desired position.

6.3 Programming End Positions

After pairing, you can precisely set the upper and lower limits for your motors. This process typically involves moving the motor to the desired position and then confirming it via the MENU or OK button. Refer to the on-screen instructions for detailed steps.

6.4 Функције тајмера

The iveo Multi Send offers various automated timer functions:

• Astro Function: Automatically closes your roller shutters at sunset. The opening time can be set manually.
• Individual Program: Allows you to program specific opening and closing times for each channel according to your daily schedule.
• Празнична функција: Randomizes the set automatic operating times by up to 30 minutes to simulate occupancy, enhancing security when you are away.
• Intermediate Position / Ventilation/Tilt: Allows programming and recalling a specific intermediate position or a ventilation/tilt position for your shading system.

6.5 Automatic / Manual Mode Switching

Притисните тастер АУТО button to toggle between automatic (timer-controlled) and manual operation. When in automatic mode, the display will show 'AUTO'. Manual control is always possible regardless of the selected mode.

6.6 Automatic Summer/Winter Time Adjustment

The device automatically adjusts for daylight saving time changes (summer/winter time), ensuring your programmed schedules remain accurate without manual intervention.

7. Одржавање

7.1 Чишћење

Clean the surface of the hand transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the casinг или приказ.

7.2 Замена батерије

When the display becomes dim or the device no longer responds reliably, it is time to replace the batteries. Follow the battery installation steps (Section 5.1) to replace the two AAA batteries.

КСНУМКС. Решавање проблема

9. Техничке спецификације

10. Компатибилност

This SELVE iveo Multi Send hand transmitter is specifically designed and guaranteed to work only with SELVE SE Pro-RC и SEL Plus R(C) radio motors. It is not compatible with radio motors from other manufacturers or other SELVE motor series that do not support this radio protocol.

11. Информације о одлагању

Do not dispose of the device or batteries with household waste. Electronic devices and batteries must be collected separately and disposed of at designated recycling points in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.