1. Увод
This manual provides instructions for the installation, operation, and maintenance of the Isoled ISO One SYS LED Universal 4-Channel Wireless Sequence Controller. This device is designed to manage LED lighting systems with 4 channels, offering wireless control capabilities for various LED types including Single Color, RGB, and RGB+W/Dynamic White.
2. Безбедносна упутства
- Увек искључите напајање пре инсталације или одржавања како бисте спречили струјни удар.
- Инсталацију треба да изврши квалификовани електричар у складу са локалним електричним прописима.
- Уверите се да је улазна волtage (12-36V DC) matches the power supply specifications.
- Do not exceed the maximum load capacity of 4 x 5A per channel. Overloading can damage the device and connected LEDs.
- Avoid exposing the controller to moisture, water, or extreme temperatures. Operate within specified environmental conditions.
- Do not attempt to open or modify the controller. This will void the warranty and may cause damage or injury.
3. Карактеристике производа
- Universal 4-channel wireless sequence controller for LED systems.
- Supports Single Color, RGB, and RGB+W/Dynamic White LED configurations.
- Operating frequency: 434 MHz / 868 MHz for reliable wireless communication.
- Широк улазни волtagОпсег: 12-36В ДЦ.
- High output capacity: Maximum load of 4 x 5A per channel.
- Memory function: Programming settings are retained even after power disconnection.
- Multi-controller compatibility: Can be controlled by up to 5 different SYS/Sequence controllers per zone.
4. Садржај пакета
Please check the package contents upon receipt. It should include:
- 1x ISO One SYS LED Universal 4-Channel Wireless Sequence Controller (Model 112477)
- 1x Упутство за употребу (Овај документ)
Note: Power supply, LED strips, and wireless remote/wall panel are sold separately.
5. Подешавање
5.1. Dijagram ožičenja
Connect the power supply (12-36V DC) to the controller's input terminals (V+ and V-). Connect the LED strips to the corresponding output channels (CH1, CH2, CH3, CH4) and the common positive terminal (V+). Ensure correct polarity for all connections.
Image Description: A diagram illustrating the connection points on the ISO One SYS LED controller. It shows input terminals for 12-36V DC power (V+ and V-) and four output channels (CH1, CH2, CH3, CH4) with a shared V+ terminal for connecting LED strips. The diagram emphasizes correct polarity for all connections.
5.2. Pairing with a Wireless Controller
To pair the SYS LED controller with a compatible wireless remote or wall panel (sold separately), follow these steps:
- Ensure the SYS LED controller is powered on and connected to LED lights.
- On your wireless remote or wall panel, initiate the pairing mode. This usually involves pressing a specific button (e.g., 'Match' or 'Learn') or a combination of buttons. Refer to your remote's specific instructions.
- Within 5 seconds of initiating pairing mode on the remote, briefly press the small 'Match' button located on the SYS LED controller.
- The connected LED lights will flash several times to confirm successful pairing.
Note: Up to 5 different SYS/Sequence controllers can be paired to one zone on a single remote.
6. Упутство за употребу
Once successfully paired, the SYS LED controller can be operated using the linked wireless remote or wall panel. The specific functions will depend on the capabilities of your chosen remote.
- Укључивање/искључивање: Use the designated power button on your remote to turn the connected LEDs on or off.
- Подешавање осветљености: Use the brightness up/down buttons or a dimmer wheel to adjust the light intensity.
- Color Selection (for RGB/RGB+W): Select desired colors using a color wheel, preset color buttons, or color temperature controls (for Dynamic White).
- Избор режима: Cycle through various dynamic lighting modes, such as fading, jumping, or sequencing patterns.
- Подешавање брзине: Adjust the speed of dynamic modes to your preference.
Refer to your specific wireless remote or wall panel manual for detailed operation instructions and advanced features.
7. Одржавање
The ISO One SYS LED controller is designed for long-term reliability and requires minimal maintenance.
- Чишћење: Gently wipe the device with a dry, soft cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing.
- инспекција: Периодично проверавајте све спојеве ожичења како бисте били сигурни да су безбедни и без корозије.
- Окружење: Ensure the controller is kept in a dry environment, away from direct sunlight, high humidity, and extreme temperatures to prolong its lifespan.
КСНУМКС. Решавање проблема
If you encounter issues with your ISO One SYS LED controller, please refer to the table below for common problems and solutions.
| Проблем | Могући узрок | Решење |
|---|---|---|
| ЛЕД диоде не светле | Нема напајања за контролер | Check power supply connection and ensure it is active. |
| Нетачно ожичење | Verify LED strip and power supply polarity. Ensure all wires are securely connected. | |
| Контролер није упарен | Пратите упутства за упаривање у одељку 5.2. | |
| LEDs flicker or behave erratically | Лабава веза | Secure all wiring connections, especially at the controller and LED strip. |
| Преоптерећење | Ensure total load does not exceed 4x5A per channel. Reduce connected LED length if necessary. | |
| Wireless remote not responding | Батерија даљинског управљача је празна или је празна | Замените батерију даљинског управљача. |
| Даљински је ван домета | Move closer to the controller. Ensure no major obstructions are blocking the signal. |
If problems persist after attempting these solutions, please contact customer support for further assistance.
9. Спецификације
Technical specifications for the ISO One SYS LED Universal 4-Channel Wireless Sequence Controller:
| Феатуре | Детаљ |
|---|---|
| Број модела | 112477 |
| Бранд | Isoled |
| Улазни волtage | КСНУМКС-КСНУМКСВ ДЦ |
| Излазни канали | 4 |
| Максимална излазна струја | 4 x 5A per channel |
| Max Output Power (at 12V) | 24В по каналу |
| Max Output Power (at 24V) | 48В по каналу |
| Вирелесс Фрекуенци | 434 МХз / 868 МХз |
| Материјал | Пластика |
| Функција меморије | Yes (retains settings after power loss) |
Напомена: Спецификације су подложне променама без претходне најаве.
10. Гаранција и подршка
This Isoled product comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Isoled webсајту.
For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact your authorized retailer or Isoled customer service. Please have your model number (112477) and purchase information ready when contacting support.