Unknown PC101
PC101 Water Quality Tester Instruction Manual
Модел: ПЦ101
Увод
The PC101 Water Quality Tester is designed for quick and accurate measurement of pH and Chlorine (CL2) levels in swimming pools, aquariums, and spas. This device provides instant readings, eliminating the need for complex color matching charts. It is an essential tool for maintaining optimal water quality.
Image: The PC101 Water Quality Tester, showing the main handheld unit, the separate probe with two electrodes, and the coiled cable connecting them.
Сетуп
- Инсталација батерије: The PC101 requires one (1) AA 1.5V Alkaline battery (not included). Open the battery compartment, insert the battery with correct polarity, and close the compartment securely.
- Веза сонде: Ensure the probe is securely connected to the main unit.
- Initial Adjustment (Chlorine): Before testing chlorine levels, the meter must be adjusted to the "adjustment point." Refer to the operating instructions for detailed steps on this calibration.
Упутство за употребу
General Usage Notes:
- Do not immerse the probe in any liquid other than pool or spa water.
- Always ensure the probe is clean before and after use.
Testing Chlorine (CL2) Level:
- Припрема: Ensure the unit is powered on and the probe is clean.
- Подешавање: Before each chlorine test, adjust the meter to the "adjustment point" as indicated on the device. This typically involves placing the probe in a known solution or following a specific procedure outlined on the device itself (often a dial or switch).
- Урањање: Carefully immerse the probe into the water you wish to test (pool, spa, aquarium).
- Читање: Wait for the reading to stabilize on the large screen. The safe measure range for Chlorine Level is 1.2 to 1.7 ppm.
Testing pH Level:
- Припрема: Ensure the unit is powered on and the probe is clean.
- Урањање: Carefully immerse the probe into the water you wish to test.
- Читање: Wait for the reading to stabilize on the large screen. The safe measure range for pH Level is 7.2 to 7.8.
Слика: Крупни план view of the PC101 tester's display, showing the analog scales for pH and Chlorine levels with color-coded indicators for ideal ranges.
Одржавање
- Чишћење сонде: After each use, gently rinse the probe with clean water and wipe it dry with a soft cloth. Do not use abrasive materials or harsh chemicals.
- Складиштење: Store the PC101 tester in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the probe is protected from damage.
- Замена батерије: If the display becomes dim or readings are inconsistent, replace the AA 1.5V battery.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема дисплеја или је дисплеј замагљен | Празан или празна батерија | Replace the 1.5V AA battery. |
| Inaccurate Chlorine readings | Meter not adjusted to "adjustment point" before testing | Ensure the meter is adjusted correctly before each chlorine test. |
| Недоследна читања | Dirty probe electrodes; Battery low | Clean the probe electrodes thoroughly; Replace battery. |
| Оштећење сонде | Physical damage or immersion in non-pool/spa liquids | Avoid immersing the probe in liquids other than pool/spa water. Handle with care. Replacement probe may be required. |
Спецификације
- Модел: ПЦ101
- Chlorine Level Safety Range: 1.2 до 1.7 ппм
- pH Level Safety Range: 7.2 до 7.8
- Напајање: 1 x AA 1.5V Alkaline Battery (not included)
- Димензије главне јединице: Приближно 190 к 120 мм
- Probe with Handle Length: 150 мм
- Probe (electrode part only) Length: 48 mm (excluding black band)
- Дужина кабла: 130 мм
- Карактеристике екрана: Бежични
Гаранција и подршка
No specific warranty or support information is provided with this product. For any issues, please refer to the troubleshooting section or contact your retailer.