Увод
Thank you for choosing the Orbit 6-Station Easy Dial Sprinkler Timer. This manual provides detailed instructions for the proper installation, programming, and maintenance of your new irrigation controller. Designed for ease of use, this timer helps you manage your watering schedules efficiently, ensuring your landscape receives optimal hydration while conserving water.
Please read this manual thoroughly before operating the timer to ensure correct setup and to maximize its features.
Слика 1: Фронт view of the Orbit 6-Station Easy Dial Sprinkler Timer, showing the large LCD screen and programming dial.
Важне информације о безбедности
- Always disconnect power before performing any wiring or maintenance.
- Do not install the timer in direct sunlight or in areas exposed to extreme temperatures.
- Уверите се да су сви електрични прикључци безбедни и заштићени од влаге.
- This device is intended for outdoor use with irrigation systems only.
- Чувати ван домашаја деце.
Садржај пакета
Проверите да ли су све ставке присутне у вашем пакету:
- Orbit 6-Station Easy Dial Sprinkler Timer Unit
- Опрема за монтажу (шрафови и зидни типлови)
- Кориснички приручник (овај документ)
Подешавање и инсталација
1. Mounting the Timer
- Choose a suitable location near an electrical outlet and away from direct sunlight or extreme weather.
- Use the provided mounting hardware to secure the timer to a wall or sturdy surface. Ensure it is level.
2. Wiring the Valves
Each irrigation valve has two wires. One wire from each valve connects to the common wire, and the other connects to a specific station terminal on the timer.
- Connect the common wire from your valves to the terminal labeled "COMMON" or "C" on the timer.
- Connect the remaining wire from each valve to its corresponding station terminal (e.g., Valve 1 to Station 1, Valve 2 to Station 2, etc.). The Orbit 6-Station timer supports up to six individual zones.
3. Повезивање напајања
Plug the timer's power adapter into a standard electrical outlet. The LCD screen should illuminate, indicating power is supplied.
Упутство за употребу
The Easy Dial interface allows for intuitive programming. Rotate the dial to select different programming modes.
1. Setting Current Time and Date
- Окрените точкић на СЕТ ЦЛОЦК.
- Користите +/- дугмад за подешавање сата, а затим притисните НЕКСТ to move to minutes, and then to AM/PM.
- Притисните НЕКСТ to set the current year, month, and day using the +/- дугмад.
2. Programming Watering Schedules (Programs A and B)
The timer offers two independent programs, A and B, allowing for different watering schedules for various zones or plant types.
- Окрените точкић на ПРОГРАМ А or ПРОГРАМ Б.
- Постави време почетка: Притисните НЕКСТ to cycle through up to four start times per program. Use +/- to adjust. Set unused start times to OFF.
- Set Run Times: Притисните НЕКСТ. For each station (1-6), use +/- to set the watering duration from 1 minute to 240 minutes. Press НЕКСТ to move to the next station.
- Set Watering Days: Притисните НЕКСТ. Користите +/- to select specific days of the week, or choose an interval (e.g., every 2nd day).
3. Smart Budgeting / Seasonal Adjust
This feature allows you to adjust all station run times in a program by a percentage, useful for seasonal changes without reprogramming each station individually.
- Окрените точкић на БУЏЕТ.
- Користите +/- buttons to adjust the watering percentage from 10% to 200%. 100% is the programmed run time.
4. Ручно заливање
To water manually outside of programmed schedules:
- Окрените точкић на МАНУАЛ.
- Користите +/- to select the station you wish to water and set its duration.
- Притисните СТАРТ to begin manual watering. The timer will automatically return to the АУТО position after manual watering is complete.
5. Кашњење због кише
Temporarily suspend watering for a set period due to rain or other reasons.
- Окрените точкић на РАИН ДЕЛАИ.
- Користите +/- to select the number of days (24, 48, or 72 hours) you wish to delay watering.
- The timer will resume its programmed schedule automatically after the delay period.
Одржавање
1. Чишћење
Wipe the timer's exterior with a damp крпа. Не користите абразивна средства за чишћење нити потапајте уређај у воду.
2. Battery Backup (if applicable)
Some models may include a battery compartment for program backup during power outages. If your model has this feature, replace batteries annually or when the low battery indicator appears. Refer to the battery compartment for specific battery type (e.g., 2 x AA batteries).
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Екран тајмера је празан. | Нема снаге или снагеtage. | Check power connection. Ensure outlet is functional. If applicable, check battery backup. |
| Sprinklers do not turn on. | Timer not in AUTO mode, valves off, wiring issue, or low water pressure. | Ensure dial is set to AUTO. Check that water supply valves are open. Inspect wiring connections. Verify water pressure. |
| Timer waters at incorrect times. | Incorrect time/date setting or programming error. | Verify current time and date. Review program start times, run times, and watering days. |
| One station does not water. | Faulty valve, wiring issue for that station, or station not programmed. | Check wiring for the specific station. Manually test the valve. Ensure the station has a run time programmed. |
Спецификације
- Модел: 57596
- Бренд: Орбита
- Број станица: 6
- Материјал: Пластика
- Тежина: Приближно 1.3 лбс (0.59 кг)
- Улазна снага: Standard AC (refer to power adapter for specific voltage)
- УПЦ: 816602024845
Информације о гаранцији
Orbit products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit webсајт. Сачувајте рачун као доказ о куповини.
Корисничка подршка
If you have any questions or require assistance with your Orbit 6-Station Easy Dial Sprinkler Timer, please contact Orbit customer support. Contact information can typically be found on the product packaging or the official Orbit webсајту.
