Fosmon 24-Hour Mechanical Dual Outlet Timer

Увод

This manual provides instructions for the safe and efficient use of your Fosmon 24-Hour Mechanical Dual Outlet Timer, Model C-10681. This device is designed to automatically turn electrical appliances on and off at programmed times, offering convenience and potential energy savings. Please read these instructions thoroughly before operation and retain them for future reference.

Image: The Fosmon 24-Hour Mechanical Dual Outlet Timer, showing its compact design and rotating dial.

Безбедносне информације

Молимо вас да се придржавате следећих мера безбедности како бисте спречили повреде или оштећење уређаја:

• Само за употребу у затвореном простору. Не излагати води или влази.
• Do not exceed electrical ratings: 125VAC, 15A, 1875W, 10A Tungsten, 3/4HP.
• Ensure the timer is securely plugged into a grounded 3-prong outlet.
• Unplug the timer from the wall outlet before cleaning.
• Do not disassemble or attempt to repair the timer. Contact customer support for assistance.
• Чувати ван домашаја деце.

Слика: Позади view of the Fosmon timer showing the 3-prong plug and ETL certification label, indicating safety compliance.

Карактеристике производа

• 24-Hour Programmable: Set up to 24 ON/OFF cycles per day.
• 30-Minute Intervals: Program in increments as small as 30 minutes.
• Двоструке утичнице: Power two devices simultaneously.
• Прекидач за ручно преклапање: Temporarily bypass programmed settings.
• Grounded 3-Prong Design: Обезбеђује безбедан рад.
• Широка компатибилност: Погодно за лamps, fans, small appliances, reptile lights, grow lights, and holiday decorations.

Image: Close-up of the timer's dial, highlighting its fully programmable nature with 30-minute increments.

Слика: Са стране view of the timer showing two grounded outlets, illustrating its dual outlet design.

Image: Diagram showing the timer connected to various appliances like a coffee maker, lamp, fan, and stereo, demonstrating universal compatibility.

Image: The timer shown with examples of CFL, Incandescent, and LED light bulbs, indicating broad compatibility with different lighting types.

Упутства за подешавање

Follow these steps to set up your Fosmon mechanical timer:

1. Prepare the Pins: The timer comes with all pins in the DOWN position. To begin programming, pull СВЕ the pins around the dial to the UP position. Each pin represents a 30-minute interval.
2. Подесите тренутно време: Rotate the entire dial clockwise until the arrow indicator on the timer points to the current time. The dial is marked with numbers 1-12 and includes sun/moon icons to distinguish AM/PM (white half for AM, black half for PM).
3. Program ON Times: Push the pins corresponding to the desired ON times ДОВН. Фор екample, if you want the device to turn on from 6:00 PM to 10:00 PM, push down the pins from the '6' mark in the black half to the '10' mark in the black half.
4. Program OFF Times: The pins that remain in the UP position represent the OFF times.
5. Повежите уређај: Plug the appliance you wish to control into one or both of the timer's outlets.
6. Укључите тајмер: Insert the timer into a standard 3-prong wall outlet.
7. Проверите позицију прекидача: Ensure the manual override switch (located on the top or side) is set to the ТИМЕР position (usually indicated by a clock icon or "ON" for timer mode, not "ALWAYS ON").

The timer will now cycle through the programmed ON and OFF times daily.

Image: The Fosmon timer in a home setting, illustrating its use for lighting control and its dual outlet capability.

Упутство за употребу

Once programmed, the timer operates automatically.

• Аутоматски рад: The timer will activate and deactivate connected devices according to your set schedule. The dial will continuously rotate, indicating the current time.
• Ручно замена: The timer features a manual override switch, typically located on the top or side.
  • To keep the connected device ОН непрекидно, slide the switch to the "ON" or "ALWAYS ON" position.
  • To keep the connected device OFF continuously, slide the switch to the "OFF" position.
  • To resume programmed operation, slide the switch back to the "TIMER" or clock icon position.

Image: A close-up of the timer, showing the manual override switch on the top edge.

Одржавање

The Fosmon mechanical timer requires minimal maintenance.

• Чишћење: Unplug the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Складиштење: Ако тајмер складиштите дуже време, уверите се да је чист и сув. Чувати на хладном и сувом месту, заштићено од директне сунчеве светлости.

Решавање проблема

Спецификације

Гаранција и подршка

Fosmon products are designed for reliability and performance. For warranty information or technical support, please contact Fosmon customer service.

You can typically find contact details on the official Fosmon website or through your purchase platform. Please have your model number (C-10681) and purchase date available when contacting support.