SANIFLO Sanimarin 31 Electric Marine Macerating Toilet (12V)

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your SANIFLO Sanimarin 31 Electric Marine Macerating Toilet. The Sanimarin 31 is a compact, low-profile automatic toilet system designed for marine environments, featuring a stainless steel macerating blade and a control panel.

Кључне карактеристике укључују:

• Compact and efficient design suitable for limited spaces.
• Quiet operation with a soft-close seat.
• Powerful stainless steel macerating blade for waste processing.
• Dual flush modes (Eco and Normal) for water and energy efficiency.

Слика 1.1: Предња страна view of the SANIFLO Sanimarin 31 Electric Marine Macerating Toilet.

2. Безбедносне информације

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• Уверите се да је напајање искључено пре него што извршите било какву инсталацију, одржавање или решавање проблема.
• This unit operates on 12V DC. Verify your vessel's electrical system matches this requirement.
• Installation should be performed by a qualified technician if you are unfamiliar with marine plumbing and electrical systems.
• Do not dispose of foreign objects (e.g., sanitary products, paper towels, wipes, plastics) into the toilet, as this can cause blockages and damage the macerator.
• Осигурајте одговарајућу вентилацију у подручју инсталације.

3. Садржај пакета

Проверите да ли су све компоненте присутне и неоштећене приликом распакивања:

• Sanimarin 31 Electric Marine Macerating Toilet unit
• Цонтрол Панел
• ВЦ даска са меким затварањем
• Монтажни хардвер
• Упутство за употребу

4. Подешавање и инсталација

The Sanimarin 31 is designed for floor-mounted installation. Ensure adequate space and access for plumbing and electrical connections.

4.1. Димензије

Refer to the diagram below for product dimensions to ensure proper fit in your desired location.

Image 4.1: Dimensional drawing of the Sanimarin 31 toilet, showing height, width, and depth measurements.

4.2. Прикључак за водоснабдевање

• The toilet uses onboard freshwater or outside pressurized water.
• Minimum water supply pressure required is 25 PSI (1.7 bar).
• Recommended pump flow rate is 2.9 GPM.
• Connect the water inlet to a suitable freshwater supply line. A shutoff valve is recommended for maintenance.

4.3. Waste Discharge Connection

• The macerator can discharge waste up to 10 feet vertically or 100 feet horizontally.
• The discharge outlet is located at the top left rear of the toilet when viewед са фронта.
• Use appropriate marine-grade discharge hose and fittings. A 1-1/4" Fernco adapter may be required for connection to your drain system.

4.4. Електрични прикључак

• The unit requires a 12V DC power supply.
• Повежите се на наменски 25 amp струјно коло.
• Уверите се да су сви електрични прикључци безбедни и заштићени од влаге.

4.5. Монтажа

• Secure the toilet to the floor using the provided mounting hardware.
• Ensure the toilet is stable and level after installation.

5. Операција

The Sanimarin 31 is operated via a control panel with distinct flush options.

Image 5.1: The Sanimarin 31 control panel with Eco, Normal, and Empty buttons.

5.1. Функције контролне табле

• Индикатор укључивања: A light on the control panel indicates when the unit is powered.
• Индикатор пуног резервоара: An optional connection to your black water tank gauge can illuminate an indicator when the tank is full.
• ECO Flush: Initiates an economical flush using approximately 0.32 gallons of water.
• NORMAL Flush: Initiates a standard flush using approximately 0.63 gallons of water. The flush volume is adjustable up to 1 gallon.
• EMPTY Button: Activates the macerator to remove water from the bowl. This function is also used for maintenance procedures.

5.2. Flushing Procedure

1. Уверите се да је јединица укључена.
2. Изаберите било који ЕЦО or НОРМАЛНО flush button based on your requirement.
3. The macerator will activate, and water will enter the bowl to rinse and discharge waste.
4. Release the button once the flush cycle is complete and the bowl is clean.

6. Одржавање

Regular maintenance ensures optimal performance and longevity of your Sanimarin 31 toilet.

6.1. Чишћење

• Use mild, non-abrasive cleaners specifically designed for marine toilets. Avoid harsh chemicals, bleach, or abrasive pads, as these can damage the toilet's surfaces and internal components.
• Clean the bowl and exterior regularly.
• For thorough cleaning, use the ПРАЗНО button to remove water from the bowl before applying cleaner.

6.2. Припрема за зиму

If the toilet will be exposed to freezing temperatures, proper winterization is essential to prevent damage.

• Flush the toilet with fresh water several times to clear any waste.
• Искључите довод воде.
• Користите ПРАЗНО button to remove as much water as possible from the bowl and internal pump.
• Introduce non-toxic marine-grade antifreeze into the bowl and flush until antifreeze is visible in the discharge line.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your Sanimarin 31 toilet.

8. Спецификације

9. Гаранција и подршка

SANIFLO products are manufactured to high standards. For specific warranty details, please refer to the warranty card included with your product or visit the official SANIFLO webсајт. Доступност резервних делова у ЕУ је обично 2 године.

For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact SANIFLO customer support. Contact information can be found on the SANIFLO webсајту или у паковању вашег производа.

You can visit the SANIFLO Store for more information: SANIFLO Store