Pro-Ject Essential III Sgt. Pepper
Pro-Ject Essential III Beatles Turntable User Manual
Model: Essential III Sgt. Pepper
Увод
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.
Садржај пакета
Пре него што почнете, проверите да ли се у вашем пакету налазе све ставке наведене у наставку:
- Ortofon OM10 Phono Cartridge
- 15 V DC Universal Power Supply
- Hinged Acrylic Dust Cover
- Connect It E Audio Cable
- 7" 45 RPM Adaptor

Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.
Сетуп
Пратите ове кораке да бисте подесили грамофон за оптималне перформансе:
- Распакивање: Пажљиво извадите све компоненте из амбалаже. Сачувајте амбалажу за будући транспорт или складиштење.
- Пласман: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
- Постављање плоче: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
- Инсталација појаса: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
- Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
- Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
- Anti-skating Adjustment: Attach the anti-skating weight to the designated groove on the tonearm support.
- Поклопац за прашину: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
- Везе: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preampлифиер или amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.

Image: Detail of the motor pulley and belt drive system.

Image: The tonearm and pre-mounted Ortofon OM10 cartridge.
Упутство за употребу
To play a record:
- Укључено: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
- Изаберите брзину: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
- Запис места: Carefully place your vinyl record onto the platter.
- Подигните ручицу: Користите ручицу за подизање тонаруке да подигнете тонар.
- Позициона писаљка: Пажљиво померите ручицу грамофона преко жељеног почетног жлеба плоче.
- Доња ручица: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
- Крај репродукције: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.

Image: Power switch location on the turntable plinth.
Одржавање
Regular maintenance ensures the longevity and optimal performance of your turntable:
- Поклопац за прашину: Always use the dust cover when the turntable is not in use to protect it from dust and debris.
- Cleaning the Plinth: Wipe the plinth with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Чишћење оловке: Use a dedicated stylus brush or cleaning fluid to gently clean the stylus before or after each play. Brush from back to front.
- Записи о чишћењу: Keep your records clean using a record brush or a record cleaning machine to prevent dust from accumulating on the stylus.
- Преглед појасева: Periodically inspect the drive belt for wear or stretching. Replace if necessary.
Решавање проблема
Ако наиђете на проблеме са грамофоном, погледајте следеће уобичајене проблеме и решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| No power / Turntable not spinning | Power cable disconnected; Power outlet faulty; Power switch off. | Check power connections; Try a different outlet; Ensure power switch is 'On'. |
| Нема звука или је звук веома тих | Изабран је погрешан унос amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preampлифиер. | Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one. |
| Distorted sound / Skipping | Stylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged. | Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record. |
| Зујање | Уземљење није повезано; Сметње од друге електронике. | Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics. |
| Speed inconsistency | Drive belt worn or improperly seated; Motor issue. | Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support. |
Спецификације
| Феатуре | Детаљ |
|---|---|
| Назив модела | Essential III Sgt. Pepper |
| Бранд | Про-Јецт |
| Димензије (Д к Ш к В) | 12.99 к 16.54 к 4.41 инча |
| Тежина артикла | 11 фунти (приближно 5 кг) |
| Технологија повезивања | РЦА |
| Материјал | Инжењерско дрво, пластика |
| Дриве Систем | Појасни погон са синхроним мотором и силиконским ременом |
| Платтер | Acrylic (Acryl it E upgrade) |
| Тонеарм | 8.6" Aluminium Tonearm |
| Цартридге | Pre-mounted Ortofon OM10 |
| Потрошња енергије у режиму рада | 4.5 вати |
Гаранција и подршка
За информације о гаранцији и техничку подршку, обратите се званичном Pro-Ject Audio Systems-у. webсајт или контактирајте овлашћеног продавца. Сачувајте доказ о куповини за потребе гаранције.
Произвођач: Про-Јецт аудио системи
Прво доступно: 31. маја 2017. године
Политика враћања: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).
За даљу помоћ, посетите Pro-Ject Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.