PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Увод

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Безбедносна упутства

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• Ласерска безбедност: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Безбедност батерије: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Радно окружење: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Одржавање: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• PeakTech P 2800A Laser Distance Meter
• Белт Поуцх
• 2 x 1.5 V AAA алкалне батерије
• User Manual (German and English)
• Потврда калибрације

4. Девице Оверview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Слика 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

Слика 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Слика 3: Цлосе-уп view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Слика 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• ЈЕДИНИЦА: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Reference Point Button: Changes the measurement reference point (front, rear, flip-out stop).
• Дугме за меморију: Accesses stored measurements.
• Дугме за позадинско осветљење: Toggles display backlight.
• ЛЦД екран: Multi-line display showing current measurements, previous results, and function icons.

5. Подешавање

5.1 Инсталација батерије

1. Пронађите поклопац одељка за батерију на задњој страни уређаја.
2. Померите или откопчајте поклопац да бисте отворили одељак.
3. Insert two 1.5V AAA alkaline batteries, ensuring correct polarity (+/-).
4. Добро затворите поклопац одељка за батерије.

The device will automatically power on or can be powered on by pressing the МЕАС дугме.

6. Упутство за употребу

6.1 Укључивање/искључивање

• Укључено: Притисните тастер МЕАС дугме.
• Искључивање: Притисните и држите ОФФ/ЦЛЕАР button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Промена мерних јединица

Притисните тастер УНИТ button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Референтна тачка button to switch between these options. The current reference point is indicated on the display.

6.4 Мерење једне удаљености

1. Усмерите ласер ка мети.
2. Притисните тастер МЕАС дугме једном да бисте активирали ласер.
3. Притисните тастер МЕАС button again to take the measurement. The result will be displayed.

6.5 Континуирано мерење (мин/макс)

1. Притисните и држите МЕАС button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Притисните МЕАС поново да бисте зауставили континуирано мерење.

6.6 Мерење површине

1. Притисните тастер Површина/запремина button once to enter area measurement mode. An icon for area will appear on the display.
2. Измерите прву страну (нпр. дужину) притиском МЕАС.
3. Измерите другу страну (нпр. ширину) притиском МЕАС.
4. The calculated area will be displayed.

6.7 Мерење запремине

1. Притисните тастер Површина/запремина button twice to enter volume measurement mode. An icon for volume will appear.
2. Измерите дужину притиском МЕАС.
3. Измерите ширину притиском МЕАС.
4. Измерите висину притиском МЕАС.
5. The calculated volume will be displayed.

6.8 Питагорина мерења (индиректно мерење)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Притисните тастер питагорејски button to select the desired indirect measurement mode.
2. Пратите упутства на екрану да бисте измерили потребна мерења (нпр. хипотенузу, базу).
3. The device will calculate and display the unknown height or distance.

6.9 Сабирање и одузимање

Након мерења, можете додати или одузети наредна мерења:

1. Измерите мерење.
2. Притисните тастер + дугме за додавање или - дугме за одузимање.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Поновите по потреби.

6.10 Меморијска функција

The device can store up to 99 measurement values.

• продавница: Measurements are automatically stored.
• Подсетимо: Притисните тастер Меморија дугме за view stored values. Use the + и - buttons to scroll through the memory.
• Обриши меморију: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Одржавање

• Чишћење: Користите меку, дamp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Складиштење: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Замена батерије: Замените батерије када се на екрану појави индикатор празне батерије.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech webсајту или се обратите њиховом одељењу за корисничку подршку.