1. Увод
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BEMKO A31-BL01A-MID BL Electricity Meter. Please read this manual thoroughly before installation and retain it for future reference.
2. Безбедносне информације
УПОЗОРЕЊЕ: Installation and maintenance of this device must be performed by qualified personnel only. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Увек искључите напајање пре инсталирања или сервисирања бројила.
- Ensure all wiring connections are secure and correct according to local electrical codes.
- Не користите мерач ако изгледа оштећено.
- The device is rated IP20, meaning it is protected against solid objects over 12.5mm but has no protection against liquids. Install in a dry environment.
3. Производ је готовview
The BEMKO A31-BL01A-MID is a single-phase electricity meter designed for DIN rail mounting. It accurately measures electrical energy consumption.
Слика 3.1: Предња страна view of the BEMKO A31-BL01A-MID BL Electricity Meter, showing the digital display and pulse indicator.
Кључне карактеристике:
- Single-phase (1 P) energy measurement.
- Accuracy Class B.
- DIN rail mounting for easy installation.
- Ратед волtage: 230 V 50 Hz AC.
- Nominal current: 100 A.
- Степен заштите ИП20.
4. Подешавање и инсталација
Before proceeding, ensure all power to the installation area is disconnected at the main circuit breaker.
4.1 Монтажа
The meter is designed for DIN rail mounting. Securely attach the meter to a standard 35mm DIN rail within an appropriate enclosure.
Слика 4.1: Перспектива view illustrating the DIN rail mounting mechanism of the electricity meter.
4.2 Ожичење
Refer to the wiring diagram typically found on the meter's casing or in the manufacturer's detailed technical documentation. Ensure correct connection of live (L) and neutral (N) wires for both input and output. The meter supports a nominal current of 100A.
Слика 4.2: Страна view showing the terminal block for electrical connections (L and N terminals).
- Connect the incoming live wire to the designated input terminal (L-in).
- Connect the incoming neutral wire to the designated input terminal (N-in).
- Connect the outgoing live wire to the designated output terminal (L-out).
- Connect the outgoing neutral wire to the designated output terminal (N-out).
- Tighten all terminal screws securely to prevent loose connections and overheating.
After all connections are made and verified, restore power to the circuit.
5. Упутство за употребу
Once installed and powered, the meter will automatically begin measuring energy consumption.
5.1 Очитавање дисплеја
The digital display shows the total accumulated energy consumption in kilowatt-hours (kWh). The display is continuous and does not require any button presses for basic reading.
Figure 5.1: Close-up of the meter's digital display, showing the kWh reading and pulse indicator.
5.2 Пулсни излаз
The meter features a pulse output, indicated by an LED or similar mechanism, typically labeled "2000 imp/kWh". This means the meter generates 2000 pulses for every kilowatt-hour of energy consumed. This output can be used for remote monitoring or integration with other systems.
6. Одржавање
The BEMKO A31-BL01A-MID electricity meter is designed for long-term, maintenance-free operation under normal conditions.
- Чишћење: If necessary, gently wipe the meter's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- инспекција: Periodically inspect the meter and its connections for any signs of damage, loose wiring, or discoloration. Address any issues promptly by disconnecting power and consulting a qualified electrician.
- Окружење: Ensure the operating environment remains within the specified temperature and humidity ranges and free from excessive dust or moisture.
КСНУМКС. Решавање проблема
If you encounter issues with your electricity meter, consider the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Екран мерача је празан | No power supply to the meter. | Check the main circuit breaker and wiring connections. Ensure power is restored. |
| Meter not accumulating kWh | Incorrect wiring or no load connected. | Verify wiring connections according to the diagram. Ensure there is an active electrical load. |
| Pulse indicator (LED) not flashing | No power consumption or faulty meter. | Confirm that electrical devices are drawing power. If consumption is active and the LED is off, contact support. |
| Необични звукови или мириси | Internal fault or overheating. | Immediately disconnect power. Do not attempt to repair. Contact a qualified electrician or manufacturer support. |
For issues not listed here or if troubleshooting steps do not resolve the problem, contact qualified technical support.
8. Спецификације
| Параметар | Валуе |
|---|---|
| Модел | A31-BL01A-MID |
| Ратед Волtage | 230 В АЦ, 50 Хз |
| Номинал Цуррент | 100 А |
| Број модула | 1 P (Single Phase) |
| Класа тачности | B |
| Тип монтаже | Монтажа на ДИН шину |
| Оцена заштите | ИП20 |
| Пулсни излаз | 2000 имп/кВх |
| Димензије производа | 9.5 к 1.82 к 7.2 цм |
| Тежина | 117 г |
9. Гаранција и подршка
For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. BEMKO products are designed for reliability, but in case of any issues, please reach out to your point of purchase or the official BEMKO support channels for assistance.
Произвођач: BEMKO SP. Z O.O.
For technical support or service inquiries, please visit the official BEMKO webсајту или се обратите њиховом одељењу за корисничку подршку.